Funny. I just got my k-5 back from CRIS recently and decided that AF was not where it was supposed to be. Had to go in debug mode and set it to -20(!!). It was originally at -10 when I first got the camera. Funny thing was I specifically asked CRIS to check the flange distance and mount. On their notes they claim they checked and calibrated it. I've learned not to rely on infinity stops with MF lenses since they get sloppy, so as long as I can make it confirm focus at infinity I can live with that. My original K-7 is dead on and the one I bought from Joe was at -7 before I dropped it. I'm going to get that one into debug mode soon and see if I can get the AF to focus properly again.
On Sat, Dec 21, 2013 at 12:08 PM, Paul Stenquist <[email protected]> wrote: > I finally got around to running some of my autofucus lenses through fine > focus adjustment. The DA* 50-135 and DA* 60-250 were just about right on. > Splitting hairs, I went for +1 on each. The FA 35/2 required +2 as did the FA > 50/1.4. The our of the box focus was much closer than any other Pentax > digital I've owned. Each generation was an improvement over the last. > > Paul > -- > PDML Pentax-Discuss Mail List > [email protected] > http://pdml.net/mailman/listinfo/pdml_pdml.net > to UNSUBSCRIBE from the PDML, please visit the link directly above and follow > the directions. -- PDML Pentax-Discuss Mail List [email protected] http://pdml.net/mailman/listinfo/pdml_pdml.net to UNSUBSCRIBE from the PDML, please visit the link directly above and follow the directions.
