Brendan wrote: > > mine seem to, I just checked, that insert, those tabs > need to be on > top so the upper condensor sorta sits on it to stay > level ( flat side > up on top, flat side down on the lower one ), mine had > a few nicks and > scratches, it appears you have to be careful putting > them both in so > don't drop either in. I think you can put the upper > one in with out > scratching it, but minor nicks ( 1mm and smaller ) > don't show when you > focus on the neg. The real problem I'm having is > getting the filters > cut to fit that damn little tray.
You can use the below the lens filter holder with the Ilford filters that come in plastic frames. They fit perfectly. I have to do this because I replaced the condensers with a cold light, but the Ilford set is very convenient. > > --- Delano Mireles <[EMAIL PROTECTED]> wrote: > > Thanks, guys. I appreciate the response. Can you > > confirm whether the > > condensers are supposed to touch or not? > > > > Thanks again! > > > > Delano > > > > on 4/9/02 11:29 PM, Brendan at [EMAIL PROTECTED] > > wrote: > > > > > To add to this put one condensor in, flat side > > down, > > > then put the > > > aluminum insert ( not the suplementary lens ) in, > > then > > > the other > > > condesor fits in flat side facing up ( so the 2 > > now > > > face each others > > > curved ). I'm not sure how the suplementary one > > goes > > > in, I just put it > > > in flat side down curved side up and it seems to > > work. > > > > > > --- Paul Stenquist <[EMAIL PROTECTED]> > > wrote: > > >> The curved parts of the two condensers should > > face > > >> each other. The > > >> supplementary glass rests on top of the upper > > >> condenser with the curved > > >> part facing up. Hope this helps. > > >> Paul > > >> > > >> Delano Mireles wrote: > > >>> > > >>> Hi all, > > >>> > > >>> I'm hoping I can get an answer tonight as I'd > > like > > >> to take my "new to me" > > >>> B-22 for a spin. > > >>> > > >>> I need to know how the actual condensers are > > >> supposed to be installed in the > > >>> "head". I have two condensers and what I > > believe > > >> is the supplementary glass > > >>> along with an aluminum 'insert'. The > > >> supplementary glass is surrounded by > > >>> another aluminum ring. > > >>> > > >>> Anyone out there that can help me out? Paul? > > >>> > > >>> Thanks! > > >>> > > >>> Delano > > >>> - > > >>> This message is from the Pentax-Discuss Mail > > List. > > >> To unsubscribe, > > >>> go to http://www.pdml.net and follow the > > >> directions. Don't forget to > > >>> visit the Pentax Users' Gallery at > > >> http://pug.komkon.org . > > >> - > > >> This message is from the Pentax-Discuss Mail > > List. > > >> To unsubscribe, > > >> go to http://www.pdml.net and follow the > > directions. > > >> Don't forget to > > >> visit the Pentax Users' Gallery at > > >> http://pug.komkon.org . > > >> > > > > > > > > > > > > ______________________________________________________________________ > > > Music, Movies, Sports, Games! > > http://entertainment.yahoo.ca > > > - > > > This message is from the Pentax-Discuss Mail List. > > To unsubscribe, > > > go to http://www.pdml.net and follow the > > directions. Don't forget to > > > visit the Pentax Users' Gallery at > > http://pug.komkon.org . > > - > > This message is from the Pentax-Discuss Mail List. > > To unsubscribe, > > go to http://www.pdml.net and follow the directions. > > Don't forget to > > visit the Pentax Users' Gallery at > > http://pug.komkon.org . > > > > ______________________________________________________________________ > Music, Movies, Sports, Games! http://entertainment.yahoo.ca > - > This message is from the Pentax-Discuss Mail List. To unsubscribe, > go to http://www.pdml.net and follow the directions. Don't forget to > visit the Pentax Users' Gallery at http://pug.komkon.org . - This message is from the Pentax-Discuss Mail List. To unsubscribe, go to http://www.pdml.net and follow the directions. Don't forget to visit the Pentax Users' Gallery at http://pug.komkon.org .
