It's your sensor, you can do what you want to it.
On 3/28/2014 4:47 PM, Jeffery Johnson wrote:
Wait I am confused so I am not suppose to put my camera in the dish washer?
On 3/28/2014 3:41 PM, Mark C wrote:
I thought some guy on this list who debunked the canned gas issue back
in the *ist-D days. ...
I haven't seen dust problems for some time and have not done any
sensor cleaning other than the built in hypersonics or whatever. But -
I use canned gas on film before scanning. On occasion propellent does
blast out, no matter how careful I am, and the propellent does leave a
residue on the film. It can be washed off but is a PITA if it is on
the emulsion side.
Mark
On 3/27/2014 10:02 AM, Bill wrote:
One of the things that will turn grown men into mewling kittens is
any mention of using canned gas as a dust removing method for cameras.
Don't do it, they say, it is instant death for your camera. Sometimes
so stridently that one would think they were having kittens.
But really, how unsafe is it? What is the very worst case scenario?
How about a blast of liquid straight from the can?
I invite you to watch a short 1 minute (very amateur) video. The
white blast at the 15 second mark is a blast from an upside down
canned gas container being unloaded into the mirror box of a Pentax
*istD camera.
The camera suffered absolutely no ill effects from this abuse.
https://www.youtube.com/watch?v=fI3rk1sAPxc
as always, have fun.
bill
--
PDML Pentax-Discuss Mail List
PDML@pdml.net
http://pdml.net/mailman/listinfo/pdml_pdml.net
to UNSUBSCRIBE from the PDML, please visit the link directly above and follow
the directions.
