I vaguely recall a flapping mirror on one of mine. I think that was before the 
firmware patch that was said to fix the issue.
I didn’t really pay it much attention. I had heard of the issue, immediately 
knew what was going on. Pulled out the battery, did a slow five-count for luck, 
replaced the battery and went on with my shooting with no more issue at the 
time or since then. I am probably at about 8-10,000 shutter activations each on 
that body and another one.

stan

On Oct 20, 2014, at 7:24 PM, Ken Waller <[email protected]> wrote:

> Zero problems with mine after around 1500 exposures.
> 
> Kenneth Waller
> http://www.pentaxphotogallery.com/kennethwaller
> 
> ----- Original Message ----- From: "Bill" <[email protected]>
> Subject: Re: Any probs remaining with K-3?
> 
> 
>> On 20/10/2014 6:28 AM, Ralf R Radermacher wrote:
>>> I'm thinking about buying a K-3 with the 18 - 135 mm lens and must admit
>>> I haven't paid much attention to all the K-3 discussions. But I think I
>>> remember threads about various probs like the famous mirror flapping bug.
>>> 
>>> Has all this been dealt with, in the meantime, or are there any
>>> potential probs one should be aware of?
>>> 
>>> Does the K-3 suffer from the usual Pentax probs like sticking trigger
>>> button, erratic rear thumbwheel etc. that I've had on practically all of
>>> my Pentax DSLRs over the years?
>>> 
>>> Ralf
>>> 
>> 
>> No problems with mine so far. I've never run into the mirror flap issue on 
>> any of my Pentax cameras though I have heard of one or two people who have 
>> had mirror flap with the K3.
>> The only problem I've had with it is having to up my sometimes rather sloppy 
>> technique. The K3 does not suffer fools.
>> Having said this, I have just over 1000 exposures on my K3. I've been using 
>> my Fuji a lot more than the Pentax.
>> For your work, I think the K3 would be a good camera.
>> 
>> bill
> 
> 
> -- 
> PDML Pentax-Discuss Mail List
> [email protected]
> http://pdml.net/mailman/listinfo/pdml_pdml.net
> to UNSUBSCRIBE from the PDML, please visit the link directly above and follow 
> the directions.


-- 
PDML Pentax-Discuss Mail List
[email protected]
http://pdml.net/mailman/listinfo/pdml_pdml.net
to UNSUBSCRIBE from the PDML, please visit the link directly above and follow 
the directions.

Reply via email to