I totally forgot! I will try to remember today. Glad its working though!! On Mon, Aug 22, 2016 at 6:28 PM, Mark C <[email protected]> wrote: > Thanks, Zos. I tested the camera with the one remaining roller and it seems > to work just fine. I'm not sure if I even need to try and repair it, but it > may be as simple as just snapping the loose part back into place. > > Here are photos of the roller as it is now and the part that broke off: > > http://www.markcassino.com/b2evolution/index.php/mz-s-film-roller?blog=9 > > IIRC the broken off piece wraps around the first roller, so both press of > the film. I haven't figured out how it snaps on though - maybe another part > got lost when I opened the camera. > > Thanks > > Mark > > > On 8/22/2016 10:19 AM, Zos Xavius wrote: >> >> i can do this when i get home if it helps. sorry i didn't see this >> earlier. >> >> On Fri, Aug 19, 2016 at 8:36 PM, Mark C <[email protected]> wrote: >>> >>> That would be great - I want to test it without the missing part and see >>> if >>> it makes a difference anyhow. Many thanks! >>> >>> >>> On 8/19/2016 7:38 PM, John Coyle wrote: >>>> >>>> Hi Mark - can do in a day or so, but the MZ-S is currently loaded with >>>> film: expect to clear it >>>> soon, if that's Ok. (yes, I know I can unload and reload to the same >>>> frame!). >>>> >>>> John in Brisbane >>>> >>>> >>>> >>>> -----Original Message----- >>>> From: PDML [mailto:[email protected]] On Behalf Of Mark C >>>> Sent: Saturday, 20 August 2016 09:14 >>>> To: Pentax-Discuss Mail List <[email protected]> >>>> Subject: For MZ-S Owners >>>> >>>> If anyone on the list has an MZ-S, would you mind sending me a close up >>>> picture of the pressure >>>> roller that sits over the film uptake socket? It is a two part roller - >>>> some how today when I >>>> inserted a roll of film the outer roller broke free. >>>> >>>> The film made a bad noise when taking up the leader and when I opened >>>> the >>>> camera to see what was >>>> going on, the outer roller was just sitting on top of the roll of film. >>>> I'm not sure if that roller >>>> is even needed, but I saved it and would like to try re-attaching it if >>>> possible. I am not even sure >>>> I have all the parts. I reloaded the roll with the camera as is and it >>>> seems to be working fine, but >>>> I won't know till I shoot it out and develop if it is working OK. I'm >>>> thinking the film might not >>>> lie flat or maybe the partial roller mechanism would scratch the film. >>>> >>>> Thanks! >>>> >>>> Mark >>>> >>>> >>>> >>>> >>>> --- >>>> This email has been checked for viruses by Avast antivirus software. >>>> https://www.avast.com/antivirus >>>> >>>> >>>> -- >>>> PDML Pentax-Discuss Mail List >>>> [email protected] >>>> http://pdml.net/mailman/listinfo/pdml_pdml.net >>>> to UNSUBSCRIBE from the PDML, please visit the link directly above and >>>> follow the directions. >>>> >>>> >>> >>> --- >>> This email has been checked for viruses by Avast antivirus software. >>> https://www.avast.com/antivirus >>> >>> >>> -- >>> PDML Pentax-Discuss Mail List >>> [email protected] >>> http://pdml.net/mailman/listinfo/pdml_pdml.net >>> to UNSUBSCRIBE from the PDML, please visit the link directly above and >>> follow the directions. > > > > > --- > This email has been checked for viruses by Avast antivirus software. > https://www.avast.com/antivirus > > > -- > PDML Pentax-Discuss Mail List > [email protected] > http://pdml.net/mailman/listinfo/pdml_pdml.net > to UNSUBSCRIBE from the PDML, please visit the link directly above and > follow the directions.
-- PDML Pentax-Discuss Mail List [email protected] http://pdml.net/mailman/listinfo/pdml_pdml.net to UNSUBSCRIBE from the PDML, please visit the link directly above and follow the directions.
