It’s 12mm focal length, f13

> On Nov 2, 2018, at 2:30 PM, John <jsessoms...@nc.rr.com> wrote:
> 
> Is that taken at 12? ... or at 24?
> 
> On 11/2/2018 10:57, Paul Stenquist wrote:
>> Doug,
>> Here’s a sample of the 12-24 on the K-1. I shot it full frame and cropped it,
>> thinking I might get higher resolution that way. Not sure i that’s true. I
>> attached the uncrossed (and not fully rendered) as well. The window in the
>> final version is composited from another exposure.
>> https://www.photo.net/photo/18504755/Cropped-and-rendered-DA-12-24-on-K-1-full-frame-The-window-was-composited-in-from-another-exposure
>> https://www.photo.net/photo/18504754/Uncropped-DA-12-24-4-image-on-K-1-full-frame-mode
>>> On Nov 2, 2018, at 7:49 AM, Paul Stenquist <pnstenqu...@mac.com> wrote:
>>> Yes. I’d say the image quality is good. I haven’t used it recently, but I
>>> think I have an example. I will look.
>>> Paul
>>>> On Nov 1, 2018, at 8:45 PM, Doug Brewer <d...@dougbrewerphoto.com>
>>>> wrote:
>>>> Hey Paul. I figured it would only work in crop mode. Does the image
>>>> quality hold up?
>>>> Thanks for the rec on the 15-30, too. I'd have to ponder that kind of
>>>> outlay.
>>>>> On 11/1/18 4:41 PM, Paul Stenquist wrote: I have both the k1 and the
>>>>> 12-24. The combo is fine with the k1 in crop mode, but in full frame
>>>>> mode the lens’s image circle doesn’t come close to filling the frame. Paul
>>>>>> On Nov 1, 2018, at 4:06 PM, Doug Brewer <d...@dougbrewerphoto.com>
>>>>>> wrote:
>>>>>> Hi, kids.
>>>>>> Pondering getting a K-1 (the first one) for my birthday this month
>>>>>> and am wondering how it performs with the 12-24/4 that's made for the
>>>>>> crop bodies. I think Mark Roberts has the combo, but am not sure. Do
>>>>>> any of you folks also have it?
>>>>>> I am open to purchasing a full-frame wide, of course, and will
>>>>>> entertain recommendations.
>>>>>> Thanks for your time,
>>>>>> Doug
> 
> -- 
> Science - Questions we may never find answers for.
> Religion - Answers we must never question.
> 
> -- 
> PDML Pentax-Discuss Mail List
> PDML@pdml.net
> http://pdml.net/mailman/listinfo/pdml_pdml.net
> to UNSUBSCRIBE from the PDML, please visit the link directly above and follow 
> the directions.


-- 
PDML Pentax-Discuss Mail List
PDML@pdml.net
http://pdml.net/mailman/listinfo/pdml_pdml.net
to UNSUBSCRIBE from the PDML, please visit the link directly above and follow 
the directions.

Reply via email to