I had the same experience with a Metz 58 AF-2 - a firmware update was
needed to work with the K1.
Mark
On 5/8/2020 1:16 PM, Henk Terhell wrote:
Not driver, new firmware I mean.
Op 2020-05-08 om 19:15 schreef Henk Terhell:
I had a problem with P-TTL of my Metz 48 AF-1 until I installed a new
driver.
Perhaps this works for yours too?
Henk
Op 2020-05-08 om 18:37 schreef Igor PDML-StR:
Hi All!
I am still figuring out my ways with the K-1 I finally got recently.
I've discovered a strange behavior with my Metz 58-AF-1 flash:
K-1 refuses to fire it when it is set in P-TTL mode.
It works in "A", and, - it works in P-TTL-HS (high-speed).
Does anybody know why that is so?
I thought the high-speed mode was an "extra" - that some cameras
could utilize *in addition* to P-TTL, - for faster shutter speeds,
but that all P-TTL capable cameras should be able to work with P-TTL
setting.
(Both K-7 and K-5IIs were working just fine with P-TTL.)
Any ideas?
Igor
--
PDML Pentax-Discuss Mail List
PDML@pdml.net
http://pdml.net/mailman/listinfo/pdml_pdml.net
to UNSUBSCRIBE from the PDML, please visit the link directly above and follow
the directions.
