Raimo,
It is only listed in the Function section, in the English manual. For F1
in enabling the audible PCV signal it states that the beeps are for focus
confirmation, errors, or film count reaching 30.
I turn this function off because I don´t like the focus confirmation. I
would like the warning for film use. Actually I would like to have the film
counter in the viewfinder. My Nikon F3 has it. This weekend I will be
taking finish line photos at a triathlon. I have to always look at the
counter to be ready for a camera change and therefore a film roll change.
This alerts me if I have to change from the MZ-S to the ZX-5 and vice-versa.
Did Pentax ever make a camera with a film counter in the viewfinder?
Interesting if they didn´t.
César
Panama City, Florida
-----Original Message-----
From: Raimo Korhonen
Sent: Wednesday, July 31, 2002 2:42 PM
Really? This is good news, I was beginning to think that something is wrong.
Thank you (and all others who have pointed this out! And I still do not find
it in the manual.
All the best!
Raimo
Personal photography homepage at http://www.uusikaupunki.fi/~raikorho
-----Alkuperäinen viesti-----
Lähettäjä: Sylwester Pietrzyk <[EMAIL PROTECTED]>
Päivä: 31. heinäkuuta 2002 17:32
>on 31.07.02 18:19, Raimo Korhonen at [EMAIL PROTECTED]
wrote:
>
>> I do not understand the MZ-S interface - the pictures come out good
anyway -
>> but hereęs a question for which I have not found an answer in the manual:
why
>> does the thing sometimes beep repeatedly - after when I already have
taken the
>> picture?
>You have probably reached frame number 30 and it warns you, that you are
>near the end of your film. This warning is standard in MZ-S.
>
>--
>Best Regards
>Sylwek
-
This message is from the Pentax-Discuss Mail List. To unsubscribe,
go to http://www.pdml.net and follow the directions. Don't forget to
visit the Pentax Users' Gallery at http://pug.komkon.org .
