Antti-Pekka wrote: > The following is what P�l wrote long ago about the 645n custom functions.
This was probably very early on before the final information was available. There are some errors... > 2) Program Shift > Allows you to shift exposure by 1/2 stop increments instead of 1/4 stops in > program mode. I wonder how this works? With the arrow buttons? > 6) Roll And Frame Counter > Counts the rolls (from 1 to 99) along with frames shot on a particular > assignment in the > viewfinder and imprints it on the film (w/data imprint function on). Actually, it counts from 001 to 199. I have activated this feature but I have no counter in the viewfinder. Perhaps that is a separate option? > The bad news is that the custom functions needs to be set at a Pentax > service center. It cost the same whther you want one function or all. > I have not yet found out how this work. Ie. how to set shutterspeeds in half > stops (does the click stops on the shutter speed dial change to half stops - > or maybe the up/down buttons are used?), how do you do program shift?, can > you change between normal B setting and programable B setting if this custom > function is activated- if so how? - and how do you program the duration of > the exposure? It works via the up/down arrow buttons. P�l
