Unless you test under load, meter may not show the problem........ Been down this frustrating road a few too many times. Just had a wild time with a "new" battery in a wireless mouse that tested w/o load just fine. All sorts of extra clicks -- so to speak.
Otis CBWaters wrote: > You know, to avoid this in the future, you could break out your trusty > multi-meter ( note: NOT a light meter :) and test the battery for correct > voltage. > Cory Waters > > ----- Original Message ----- > From: "Kevin Waterson" <[EMAIL PROTECTED]> > To: <[EMAIL PROTECTED]> > Sent: Thursday, October 31, 2002 3:06 AM > Subject: MZ-S battery mystery Solved > > > OK, so I went to yet a third Store and purchased > > two wholesome new batteries and it works fine. I had > > purchased 2 consecutive sets of dud batteries... > > > > I once had a car with a faulty spark plug, so I replaced > > all the plugs, but it was still mis-firing, it turned out > > that one of the new plugs I had installed was faulty also. > > This faulty plug I had installed into the same cylinder as > > the one that was dead. > > > > So, whatever little quirk of fate that does these sorts of > > things has come full circle to manifest itself as my MZ-S > > batteries. > > > > I should have known it was not the quality of the MZ-S that > > was at fault. > > > > > > Kind regards > > Kevin > > > > -- > > Please avoid sending me Word or PowerPoint attachments. > > See http://www.fsf.org/philosophy/no-word-attachments.html > > Kevin Waterson > > Byron Bay, Australia > >