On 05.12.2016 13:28, Mike Cardwell wrote: > Hi, > > Just got started with PowerDNS. Developing an application using the > Remote backend, but the docs at > https://doc.powerdns.com/md/authoritative/backend-remote/ seem a > little sparse. What do the following parameters contain and when > should they be used? > > zone_id > domain_id > auth > scopeMask > > I'm particularly interested in scopeMask as it seems to be related > to powerdns caching the returned values from my application and I > intend to return different results based on the "real-remote"... > > If documentation does not exist for these parameters, how do I go > about contributing some (once I've figured out exactly how > they're used) ? > >
zone_id = optional zone id, or use -1 if you do not care about such things. This is an opaque integer used by powerdns in various places to tell you which zone it means. domain_id = ditto above, but for domains auth = 1 if your data is authoritative for the zone and 0 if not. usually you should set this to 1. setting it 0 will put the data into additional section. scopeMask = how many bits of requestor IP was used to produce this result. this should 0 unless you are using the client's (real) IP somehow to come up with the answer, and if you do, how many bits of the value was used. 128 (v6) or 32 (v4) means you used up the whole IP, 0 means no bits were used. Aki _______________________________________________ Pdns-users mailing list [email protected] https://mailman.powerdns.com/mailman/listinfo/pdns-users
