This is not necessarily linux related, but I am having trouble configuring a hard drive with my fancy, new HP NetRAID SCSI controller.
I have two other drives, a Seagate Baracuda and a WD 9100, which work quite well. The bus is termniated and the cable seems intact. All of the drives are SCA-80 with SCSI-68 adapters, and are configured similarly, using the first three IDs. All of the drives were working on another adapter, the Tekram DC-390F that I just pulled. I've changed the ID of the non-working drive, just for fun, but no change. The controller uses ID7. The only way I can tell that the controller sees (loose term) is that it pauses when it gets to it's ID in the scan and there is a white block next the the ID in the configration menu. The normal drives have a green block, an array number, and a drive number. If anyone has any idea what the issue could be, please let me know. BTW, the jumper settings on the hard drive are limitted to one jumper, which forces the drive into single-ended mode. Thanks. Jackman _______________________________________________ PDXLUG mailing list [EMAIL PROTECTED] http://pdxlug.org/mailman/listinfo/pdxlug
