I'm using an ATI Fire GL X2 card, with two 20.1" monitors at 1600x1200 via DVI. It runns very well with no glitches etc. Its AGP but they have PCIe versions too. I wouldn't have touched ATI a few years ago, but the new workstation class cards are very good.
Rich -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of John A. Ross [RSDTV] Sent: 23 February 2005 10:04 To: [EMAIL PROTECTED]; 'Protel EDA Discussion List' Subject: RE: [PEDA] Dual LCD Monitor support with PCI express Don The cards I am using are a Radeon X300 PCIx and a nVidia GeForce MX420 in the PCI slot But I got it a bit wrong, sorry, the X300 is being used as 1 x DVI 1 x RGB and the nVidia as RGB. It was the Parhelia that I used as 2 x DVI and when I updated the workstation it did not have an AGP slot to use it in! it came with the X300 already fitted so I gave this config a try and it works well. Actually I have seen less graphics and redraw related glitches than I did with the Matrox card, but that could just as easily be my own perception. John ____________________________________________________________ You are subscribed to the PEDA discussion forum To Post messages: mailto:[email protected] Unsubscribe and Other Options: http://techservinc.com/mailman/listinfo/peda_techservinc.com Browse or Search Old Archives (2001-2004): http://www.mail-archive.com/[email protected] Browse or Search Current Archives (2004-Current): http://www.mail-archive.com/[email protected]
