Adeel, If the pin1 is on the left when the notch is on the bottom, then pin1 will be on the right when the notch is on the top.
The pin numbering is always the same, except the plug can be rotated 180deg. Terry -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Adeel Malik Sent: Sunday, 10 April 2005 12:30 AM To: 'Protel EDA Forum' Subject: [PEDA] RJ45 Pin Numbering Scheme for Notch at the Bottom and notchat the top Hi All, RJ45 Socket which has a notch at the bottom of the package (when looked from front) has its Pin1 on the left. I want to ask where will be the Pin 1 for the RJ45 Socket which has its notch at the Top. Can someone help me as I don't have the RJ45 Socket in hand that has Notch at the top. Regards, Adeel Malik ____________________________________________________________ You are subscribed to the PEDA discussion forum To Post messages: mailto:[email protected] Unsubscribe and Other Options: http://techservinc.com/mailman/listinfo/peda_techservinc.com Browse or Search Old Archives (2001-2004): http://www.mail-archive.com/[email protected] Browse or Search Current Archives (2004-Current): http://www.mail-archive.com/[email protected] ____________________________________________________________ You are subscribed to the PEDA discussion forum To Post messages: mailto:[email protected] Unsubscribe and Other Options: http://techservinc.com/mailman/listinfo/peda_techservinc.com Browse or Search Old Archives (2001-2004): http://www.mail-archive.com/[email protected] Browse or Search Current Archives (2004-Current): http://www.mail-archive.com/[email protected]
