Tony,
Maybe Tasting_fan is asking whether the netlist is required if using the
Update PCB after compiling, not sure.
Anyway, Tasting_fan, you don't have to create a netlist if you have done
the sch in P2004, then compile and then Update PCB from the design menu I
think (from memory). The netlist will be sent to the PCB without having to
manually create it in Sch.
Ian Wilson
On 01:39 PM 21/07/2005, Tony Karavidas said:
It's not necessary, but if you don't use one, you are setting yourself up
for mistakes and possible ridicule. Using a netlist will guide you when
routing and allow you to check your work against a schematic.
I would highly recommend using a netlist.
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
Behalf Of tastingfan tastingfan
Sent: Wednesday, July 20, 2005 8:19 PM
To: [email protected]
Subject: [PEDA] Is a netlist necessary?
Hi,
In Protel2004 a netlist can be created under Design->Netlist for
Project->Protel. Is it necessary for the following PCB design?
Best Regards
Tasting_fan
____________________________________________________________
You are subscribed to the PEDA discussion forum
To Post messages:
mailto:[email protected]
Unsubscribe and Other Options:
http://techservinc.com/mailman/listinfo/peda_techservinc.com
Browse or Search Old Archives (2001-2004):
http://www.mail-archive.com/[email protected]
Browse or Search Current Archives (2004-Current):
http://www.mail-archive.com/[email protected]
