At 31-8-2005 12:06, Adeel Malik wrote:
Hi Folks,
In my board I want to place the Polygon such that it is
drawn at a clearance of let say 100 mils from the mounting holes while
for the rest of the Board it is drawn at the clearance of 15 mils.
How can I accomplish that in 99SE.
Regards,
Adeel Malik
1) create a class for all hounting holes and assign all mounting holes to
that class, say 'mounting'
2) setup a rule to allow 100 mils clearance between polygons and items that
belong to class 'mounting'
3) setup a rule to give 15 mils clearance between polygons and everything else
4) done.
This scheme can be expanded for other things like specific nets or net
classes, etc, etc.
Works for me.
Good luck,
Leo Potjewijd
hardware designer
Integrated Engineering B.V.
[EMAIL PROTECTED]
+31 20 4620700
____________________________________________________________
You are subscribed to the PEDA discussion forum
To Post messages:
mailto:[email protected]
Unsubscribe and Other Options:
http://techservinc.com/mailman/listinfo/peda_techservinc.com
Browse or Search Old Archives (2001-2004):
http://www.mail-archive.com/[email protected]
Browse or Search Current Archives (2004-Current):
http://www.mail-archive.com/[email protected]
