The problem you guys are discussing was evident in P98 as well. We all know Protel isn't the stiffest piece of software, so it shouldn't be too surprising to anyone, at anyone who's used it as long as many of us here in the PEDA group.
aj >-----Original Message----- >From: [EMAIL PROTECTED] >[mailto:[EMAIL PROTECTED] On Behalf Of Brad Velander >Sent: Thursday, June 22, 2006 12:18 PM >To: Protel EDA Discussion List >Subject: Re: [PEDA] Mouse Scroll Wheel in Protel 99SE/Dual Screens > >Dennis, Bob, > Typically I will have my PCB on the left monitor and a >schematic page on the right monitor for most of my work and >this works pretty well because at that time I am not doing a >lot of schematic edits (on the right monitor). When I am >working on only schematics I will commonly have two schematic >pages, visible and split equally between the two monitors. >While editing schematics in this manner, working on the right >schematic/monitor, the bug involving the split between >monitors moving rears it's head randomly. > > If I am editing the schematic on the right monitor and >I just click somewhere along roughly a vertical line approx. >75% across the right monitor, the split between the two >schematics will jump to approx. that point. Making the left >schematic page cover 1.5 - 1.75 percent of the total work >area. It is somewhat random or possibly it is just a very >precise thin target line that you don't click on it very often >(just a simple click, no operation specified at the time, >typically I am making sure the focus is on that schematic on >the right monitor and not the schematic on the left monitor). > > I don't know how better to put it into words, the >vertical line is not an actual line/wire in the schematic >though, it is just some arbitrary vertical axis in the work >area of the right monitor. This is very consistent across our >three PCB designer's work stations, so it is not just me or my >computer/install. They are all different machines, with >different video cards, monitors, CPUs, etc., so it is also not >a computer/driver/config issue. > >Sincerely, >Brad Velander >Senior PCB Designer >Northern Airborne Technology >#14 - 1925 Kirschner Road, >Kelowna, BC, V1Y 4N7. >tel (250) 763-2232 ext. 225 >fax (250) 762-3374 > > > > >-----Original Message----- >From: Dennis Saputelli [mailto:[EMAIL PROTECTED] >Sent: Wednesday, June 21, 2006 8:37 PM >To: Protel EDA Discussion List >Subject: Re: [PEDA] Mouse Scroll Wheel in Protel 99SE/Dual Screens > > >this sounds about consistent with what brad & i have said > >brad, i didn't notice it (sch issue) as closely as you did but >putting the sch on one monitor solved the issue, too bad > >AD6 doesn't do this and am also playing with manual routing, >it seems pretty good and smart at that but i am nowhere up to >speed on the program > >ds > > >____________________________________________________________ >You are subscribed to the PEDA discussion forum > >To Post messages: >mailto:[email protected] > >Unsubscribe and Other Options: >http://techservinc.com/mailman/listinfo/peda_techservinc.com > >Browse or Search Old Archives (2001-2004): >http://www.mail-archive.com/[email protected] > >Browse or Search Current Archives (2004-Current): >http://www.mail-archive.com/[email protected] > > This e-mail transmission and its attachments may contain information from Avtron Manufacturing, Inc. that is proprietary, privileged and/or confidential and is intended exclusively for the person(s) to whom it is addressed. Any use, copying, retention or disclosure by any person other than the intended recipient or the intended recipient's designees is strictly prohibited. If you have received this message in error, please notify the sender immediately by return e-mail and delete all copies. ____________________________________________________________ You are subscribed to the PEDA discussion forum To Post messages: mailto:[email protected] Unsubscribe and Other Options: http://techservinc.com/mailman/listinfo/peda_techservinc.com Browse or Search Old Archives (2001-2004): http://www.mail-archive.com/[email protected] Browse or Search Current Archives (2004-Current): http://www.mail-archive.com/[email protected]
