Has any one else had problems with importing netlist into all DXP products. Specifically, importing large netlist with 2000 -3000 components. The first time the netlist imports, DXP chokes so bad that it locks up. The method I use to get around it is to extract the components as a separate netlist. I import the components in first then reload the original netlist with nets back in. I have seen this pretty consistant across DXP SP2 to AD6. and have used several different computers. Is any one else using other programmed netlist? The reason I have to use these netlist is because I have Cadance and Orcad customers.
Thanks Mike Reagan (é***************************************************************************** The information contained in, or attached to, this e-mail, may contain confidential information and is intended solely for the use of the individual or entity to whom they are addressed and may be subject to legal privilege If you have received this e-mail in error you should notify the sender immediately by reply e-mail, delete the message from your system and notify your system manager. Please do not copy it for any purpose, or disclose its contents to any other person. The views or opinions presented in this e-mail are solely those of the author and do not necessarily represent those of the company. The recipient should check this e-mail and any attachments for the presence of viruses. The company accepts no liability for any damage caused, directly or indirectly, by any virus transmitted in this email. ******************************************************************************* ____________________________________________________________ You are subscribed to the PEDA discussion forum To Post messages: mailto:[email protected] Unsubscribe and Other Options: http://techservinc.com/mailman/listinfo/peda_techservinc.com Browse or Search Old Archives (2001-2004): http://www.mail-archive.com/[email protected] Browse or Search Current Archives (2004-Current): http://www.mail-archive.com/[email protected]
