|
G ood Morning
Any candidate interested in following open position,
please send your resume by email to sender or deliver it to McVida Jl Falatehan
No. 1A Kebayoran Baru Jakarta soonest. Age above 45 may be
considered.
A large Construction Company in
1.
PROJECT
MANAGER,
Must
be engineering graduate (Mechanical,
Chemical, Civil or Electrical) with min 15 years related experience as a Project
Manager in onshore fabrication of topsides and offshore hook-up and
commissioning of production platforms, gas complexes or upgrading of offshore
facilities. 2.
QUALITY
CONTROL SUPERVISOR, Must be engineering graduate
(Metallurgy or Mechanical) with ten years related experience and must
possess strong background in NDT and welding processes and be knowledgeable of
ASME/ANSI Codes and other industry codes and standards including oil company
engineering specifications and basic practices. And must have recent experience
in a similar capacity as a QC Supervisor and be capable of developing and
implementing the QC plan effectively. 3.
LEAD
STRUCTURAL ENGINEER. Must be
engineering graduate (Civil/Structural) with min eight years works experience in
design and construction of onshore/offshore O&G facilities. Must posses a
strong background in the fabrication of modules, living quarters, flare booms
etc. And must be knowledgeable about soils engineering and foundation design.
Must be proficient in planning fabrication work including of sequencing of
fabrication activities and performance of heavy lifts, load-outs
etc. 4.
LEAD
ELECTRICAL ENGINEER. Must be engineering graduate
with min eight years working experience in engineering, construction and
commissioning of onshore/offshore O&G facilities. Must posses competency in
the development and review of detailed electrical design drawings and schematics
with a min five years work experience in HUC of offshore electrical systems for
O&G production platforms. Must be competent in commissioning of emergency
power systems, MCC and switchgear facilities, control panels, electric heaters,
high voltage transformers and automatic transfer switch testing/commissioning.
Must be qualified to supervise the installation and commissioning of high
voltage (6,600 volts) switchgear and circuits. Must have microprocessor controls
knowledge and be able to carry out cause and effect matrix test and
troubleshooting of complex control circuits. Requirement for electrical
personnel shall comply with Electricity Supply Act 1990 (ACT 447) and
Electricity Supply (Successor Company) Act 1997 (ACT 448) & Regulations and
Rules. 5.
LEAD
MECHANICAL ENGINEER. Must be engineering graduate
with min eight years in O&G facilities design/construction/gas processing or
petrochemical plants, and with min five years design/const or rotating/static
equipment. Must be knowledgeable in ASME/ANSI codes and oil company
specifications and basic practice. 6.
LEAD TESTING
AND PRE-COMMISSIONING ENGINEER. Must be engineering graduate
in chemical, mechanical or electrical with min ten years overall working
experience. Must have at least five years hands-on experience in the
commissioning of O&G process systems including equipment such as gas
compressors, turbo generators, pumps accessories and rotating systems. Must have
experience in commissioning offshore O&G production and processing
facilities, gas dehydration systems, water injection systems or similar related
facilities and equipment. Must posses strong leadership skills to lead a
commissioning team and be capable of planning, organizing and co-ordination a
large workforce for successful completion of facilities commissioning.
Requirement for electrical personnel shall comply with Electricity Supply Act
1990 (ACT 447) and Electricity Supply (Successor Company) Act 1997 (ACT 448)
& Regulations and Rules. 7.
INSTRUMENT /
CONTROL ENGINEER, Must be engineering graduate
in electronics or electrical or control with min ten years overall working
experience. Must have at least 5 years
hands-on experience in offshore hook-up and commissioning of oil and gas
production facilities related equipment or facilities. Must have hands-on
experience in commissioning microprocessor controls of turbo-compressors and
generators (such as Detronics / Allen Bradley / Rosemount / Petrotech /
Triconex), PLC/DCS, Fire and Gas detection systems, Crude Custody Meters, etc.
(3) Must be very knowledgeable and experienced in loop-checking, troubleshooting
and shall be able to read and interpret wiring diagram, schematic and logic
diagram, performing cause and effect matrix test of control loops and
supervision of the commissioning and start-up of the facilities. 8.
BOCAD
OPERATOR �
3-dimension Structural Engineering Detailing software. Engineering graduate, diploma
in any engineering discipline or equivalent professional qualification with min
three years working experience as a BOCAD operator in the design and fabrication
of O&G facilities and familiar with the requirement. Candidates
should have relevant qualifications with more than 10 years
experience related to the respective positions. Ideally, the candidate
should be 35 to 45 years of age and able to communicate in English. Please send
your CV directly to me, not later then Regards, Ridwan M. Risan Managing Director JALESVEVA YAYAMAHE Yahoo! Groups Links
|
<<McVida Header05.JPG>>
