Corey, Patch applied. Glad to see this one fixed finally.
Thanks. On Wed, May 21, 2008 at 2:45 AM, Corey Ashford <[EMAIL PROTECTED]> wrote: > Hello, > > Attached is a patch for Power which implements the IRQ resend logic, and > also incorporates a fix for when MASKING is enabled, as Stephane requested. > > This patch should work for later POWER4 chips through POWER6 chips which > have the PMAO bit in the MMCR0 register. I haven't yet figured out how to > resend an IRQ for early POWER4, and PPC970, but since we don't have support > in yet for PPC970, this limitation will only affect early POWER4 chips. > > Please let me know if you see any problems with this patch. > > Thanks for your consideration. > > - Corey > > > -- > Corey Ashford > Software Engineer > IBM Linux Technology Center, Linux Toolchain > Beaverton, OR > 503-578-3507 > [EMAIL PROTECTED] > > ------------------------------------------------------------------------- > This SF.net email is sponsored by: Microsoft > Defy all challenges. Microsoft(R) Visual Studio 2008. > http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ > _______________________________________________ > perfmon2-devel mailing list > perfmon2-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/perfmon2-devel > > ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ perfmon2-devel mailing list perfmon2-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/perfmon2-devel
