Hi, Works for me on a Debian system with the attached .config.
I think there is a missing prototype but it shows up only when you compile for UP mode, run make menuconfig, and enable SMP (CONFIG_SMP). On Fri, Jan 23, 2009 at 12:40 PM, Kanaujia, Vishal (STSD) <vishal.kanau...@hp.com> wrote: > Hi Stephan, > We are trying to build Linux kernel(2.6.28) with latest > perfmon(perfmon-new-base-090121). We are doing it on Red Hat Enterprise Linux > ES release 4. We configured the kernel with h/w performance monitor support. > While building the kernel, we are getting following error: > > .. > ... > CC arch/ia64/dig/dig_vtd_iommu.o > LD arch/ia64/dig/built-in.o > CC arch/ia64/perfmon/perfmon.o > arch/ia64/perfmon/perfmon.c: In function `__pfm_use_dbregs': > arch/ia64/perfmon/perfmon.c:803: error: implicit declaration of function > `pfm_save_pmds_release' > make[1]: *** [arch/ia64/perfmon/perfmon.o] Error 1 > make: *** [arch/ia64/perfmon] Error 2 > > Am I missing anything here? > > Thanks, > Vishal > > O/P of /proc/cpuinfo: > > # more /proc/cpuinfo > processor : 0 > vendor : GenuineIntel > arch : IA-64 > family : 31 > model : 1 > model name : Madison > revision : 5 > archrev : 0 > features : branchlong, 0x8 > cpu number : 0 > cpu regs : 4 > cpu MHz : 1099.781 > itc MHz : 1099.781754 > BogoMIPS : 3932.16 > siblings : 1 > physical id: 0 > > processor : 1 > vendor : GenuineIntel > arch : IA-64 > family : 31 > model : 1 > model name : Madison > revision : 5 > archrev : 0 > features : branchlong, 0x8 > cpu number : 0 > cpu regs : 4 > cpu MHz : 1099.781 > itc MHz : 1099.781754 > BogoMIPS : 3932.16 > siblings : 1 > physical id: 1 > ------------------------------------------------------------------------------ This SF.net email is sponsored by: SourcForge Community SourceForge wants to tell your story. http://p.sf.net/sfu/sf-spreadtheword _______________________________________________ perfmon2-devel mailing list perfmon2-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/perfmon2-devel
