Ping? To recap, (it's been a few weeks) Support to enable Power10 for Perfmon/libPFM has been posted to the fork as referenced below. Due to size these patches wouldn't make it to the list.
Thanks, -Will On Thu, 2022-05-12 at 14:40 -0500, will schmidt wrote: > > > > > > [ I'm not familiar with the incantations, but the info > > > > > below should be sufficient to get at the patch :-) ] <snip> > > > > > git clone https://git.code.sf.net/u/willschm/perfmon2 > > > > > willschm-perfmon2 > > > > > > > > > > > > > > Hi, > > > > > > > > What is the status of these patches for power10? They are still not > > > > in the upstream libpfm master git repository. > > > > > > Hi, > > > > > > A few minutes ago I pushed this patch to my perfmon fork. > > > > > > > > > > Hi Will Schmidt, > > > > > > Thanks for the update with the pointer to the power10 event documentation. > > I was looking though the patches and noticed that following patch has > > PFM_PMU_POWER10 below the "/* MUST ADD NEW PMU MODELS HERE */" in pfmlib.h. > > That comment should be adjacent to the PFM_PMU_MAX. > > > > https://sourceforge.net/u/willschm/perfmon2/ci/61697515bbc09d7568bd50665f3934bebc0c0485/ > > Corrected and pushed to the fork. > > https://sourceforge.net/u/willschm/perfmon2/ci/1db75b57c0ef6f8c9655059c7f033ddbd8908a4c/ > > > > > That should complete the correction of all of the issues that were identified > so far. Thanks for the review, etc. > > > https://sourceforge.net/u/willschm/perfmon2/ci/1e61e646068c4e6678bfdbea30689831ab52bee7/ > _______________________________________________ perfmon2-devel mailing list perfmon2-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/perfmon2-devel
