> Please re-send. I thought I had applied it at some point.
Here is an updated version against the current tree.
For Pentium Pro:
A large number of PII/PIII only events removed.
For Pentium II, the following were removed:
EMON_KNI_PREF_DISPATCHED /* these are PIII only */
EMON_KNI_PREF_MISS
EMON_KNI_INST_RETIRED
EMON_KNI_COMP_INST_RET
For Pentium III, the following were removed:
MMX_INSTR_EXEC /* the manual says these are PII only */
MMX_INSTR_RET
For Pentium M, the following were removed:
MMX_INSTR_EXEC /* the manual says these are PII only */
MMX_INSTR_RET
--- libpfm-3.2-071017/lib/i386_p6_events.h.orig 2007-10-30 19:53:22.000000000
-0500
+++ libpfm-3.2-071017/lib/i386_p6_events.h 2007-10-30 20:03:28.000000000
-0500
@@ -77,6 +77,243 @@
}}
+#define I386_P6_PII_ONLY_PME \
+ {.pme_name = "MMX_INSTR_EXEC",\
+ .pme_code = 0xb0,\
+ .pme_desc = "Number of MMX instructions executed"\
+ },\
+ {.pme_name = "MMX_INSTR_RET",\
+ .pme_code = 0xce,\
+ .pme_desc = "Number of MMX instructions retired"\
+ }\
+
+#define I386_P6_PII_PIII_PME \
+ {.pme_name = "MMX_SAT_INSTR_EXEC",\
+ .pme_code = 0xb1,\
+ .pme_desc = "Number of MMX saturating instructions executed"\
+ },\
+ {.pme_name = "MMX_UOPS_EXEC",\
+ .pme_code = 0xb2,\
+ .pme_desc = "Number of MMX micro-ops executed"\
+ },\
+ {.pme_name = "MMX_INSTR_TYPE_EXEC",\
+ .pme_code = 0xb3,\
+ .pme_desc = "Number of MMX instructions executed by type",\
+ .pme_flags = PFMLIB_I386_P6_UMASK_COMBO, \
+ .pme_numasks = 6, \
+ .pme_umasks = { \
+ { .pme_uname = "MUL", \
+ .pme_udesc = "MMX packed multiply instructions executed", \
+ .pme_ucode = 0x1 \
+ }, \
+ { .pme_uname = "SHIFT", \
+ .pme_udesc = "MMX packed shift instructions executed", \
+ .pme_ucode = 0x2 \
+ }, \
+ { .pme_uname = "PACK", \
+ .pme_udesc = "MMX pack operation instructions executed", \
+ .pme_ucode = 0x4 \
+ }, \
+ { .pme_uname = "UNPACK", \
+ .pme_udesc = "MMX unpack operation instructions executed", \
+ .pme_ucode = 0x8 \
+ }, \
+ { .pme_uname = "LOGICAL", \
+ .pme_udesc = "MMX packed logical instructions executed", \
+ .pme_ucode = 0x10 \
+ }, \
+ { .pme_uname = "ARITH", \
+ .pme_udesc = "MMX packed arithmetic instructions executed", \
+ .pme_ucode = 0x20 \
+ } \
+ }\
+ },\
+ {.pme_name = "FP_MMX_TRANS",\
+ .pme_code = 0xcc,\
+ .pme_desc = "Number of MMX transitions",\
+ .pme_numasks = 2, \
+ .pme_umasks = { \
+ { .pme_uname = "TO_FP", \
+ .pme_udesc = "from MMX instructions to floating-point
instructions", \
+ .pme_ucode = 0x00 \
+ }, \
+ { .pme_uname = "TO_MMX", \
+ .pme_udesc = "from floating-point instructions to MMX
instructions", \
+ .pme_ucode = 0x01 \
+ }\
+ }\
+ },\
+ {.pme_name = "MMX_ASSIST",\
+ .pme_code = 0xcd,\
+ .pme_desc = "Number of MMX micro-ops executed"\
+ },\
+ {.pme_name = "SEG_RENAME_STALLS",\
+ .pme_code = 0xd4,\
+ .pme_desc = "Number of Segment Register Renaming Stalls", \
+ .pme_flags = PFMLIB_I386_P6_UMASK_COMBO, \
+ .pme_numasks = 4, \
+ .pme_umasks = { \
+ { .pme_uname = "ES", \
+ .pme_udesc = "Segment register ES", \
+ .pme_ucode = 0x1 \
+ }, \
+ { .pme_uname = "DS", \
+ .pme_udesc = "Segment register DS", \
+ .pme_ucode = 0x2 \
+ }, \
+ { .pme_uname = "FS", \
+ .pme_udesc = "Segment register FS", \
+ .pme_ucode = 0x4 \
+ }, \
+ { .pme_uname = "GS", \
+ .pme_udesc = "Segment register GS", \
+ .pme_ucode = 0x8 \
+ } \
+ }\
+ },\
+ {.pme_name = "SEG_REG_RENAMES",\
+ .pme_code = 0xd5,\
+ .pme_desc = "Number of Segment Register Renames", \
+ .pme_flags = PFMLIB_I386_P6_UMASK_COMBO, \
+ .pme_numasks = 4, \
+ .pme_umasks = { \
+ { .pme_uname = "ES", \
+ .pme_udesc = "Segment register ES", \
+ .pme_ucode = 0x1 \
+ }, \
+ { .pme_uname = "DS", \
+ .pme_udesc = "Segment register DS", \
+ .pme_ucode = 0x2 \
+ }, \
+ { .pme_uname = "FS", \
+ .pme_udesc = "Segment register FS", \
+ .pme_ucode = 0x4 \
+ }, \
+ { .pme_uname = "GS", \
+ .pme_udesc = "Segment register GS", \
+ .pme_ucode = 0x8 \
+ } \
+ }\
+ },\
+ {.pme_name = "RET_SEG_RENAMES",\
+ .pme_code = 0xd6,\
+ .pme_desc = "Number of segment register rename events retired"\
+ } \
+
+#define I386_P6_PIII_PME \
+ {.pme_name = "EMON_KNI_PREF_DISPATCHED",\
+ .pme_code = 0x07,\
+ .pme_desc = "Number of Streaming SIMD extensions
prefetch/weakly-ordered instructions dispatched " \
+ "(speculative prefetches are included in counting).
Pentium III and later",\
+ .pme_numasks = 4, \
+ .pme_umasks = { \
+ { .pme_uname = "NTA", \
+ .pme_udesc = "prefetch NTA", \
+ .pme_ucode = 0x00 \
+ }, \
+ { .pme_uname = "T1", \
+ .pme_udesc = "prefetch T1", \
+ .pme_ucode = 0x01 \
+ }, \
+ { .pme_uname = "T2", \
+ .pme_udesc = "prefetch T2", \
+ .pme_ucode = 0x02 \
+ }, \
+ { .pme_uname = "WEAK", \
+ .pme_udesc = "weakly ordered stores", \
+ .pme_ucode = 0x03 \
+ } \
+ } \
+ },\
+ {.pme_name = "EMON_KNI_PREF_MISS",\
+ .pme_code = 0x4b,\
+ .pme_desc = "Number of prefetch/weakly-ordered instructions that miss
all caches. Pentium III and later",\
+ .pme_numasks = 4, \
+ .pme_umasks = { \
+ { .pme_uname = "NTA", \
+ .pme_udesc = "prefetch NTA", \
+ .pme_ucode = 0x00 \
+ }, \
+ { .pme_uname = "T1", \
+ .pme_udesc = "prefetch T1", \
+ .pme_ucode = 0x01 \
+ }, \
+ { .pme_uname = "T2", \
+ .pme_udesc = "prefetch T2", \
+ .pme_ucode = 0x02 \
+ }, \
+ { .pme_uname = "WEAK", \
+ .pme_udesc = "weakly ordered stores", \
+ .pme_ucode = 0x03 \
+ } \
+ } \
+ } \
+
+
+#define I386_P6_CPU_CLK_UNHALTED \
+ {.pme_name = "CPU_CLK_UNHALTED",\
+ .pme_code = 0x79,\
+ .pme_desc = "Number cycles during which the processor is not halted"\
+ }\
+
+
+#define I386_P6_NOT_PM_PME \
+ {.pme_name = "L2_LD",\
+ .pme_code = 0x29,\
+ .pme_desc = "Number of L2 data loads. This event indicates that a
normal, unlocked, load memory access "\
+ "was received by the L2. It includes only L2 cacheable memory
accesses; it does not include I/O "\
+ "accesses, other non-memory accesses, or memory accesses such
as UC/WT memory accesses. It does include "\
+ "L2 cacheable TLB miss memory accesses",\
+ I386_P6_MESI_UMASKS\
+ },\
+ {.pme_name = "L2_LINES_IN",\
+ .pme_code = 0x24,\
+ .pme_desc = "Number of lines allocated in the L2"\
+ },\
+ {.pme_name = "L2_LINES_OUT",\
+ .pme_code = 0x26,\
+ .pme_desc = "Number of lines removed from the L2 for any reason"\
+ },\
+ {.pme_name = "L2_M_LINES_OUTM",\
+ .pme_code = 0x27,\
+ .pme_desc = "Number of modified lines removed from the L2 for any
reason"\
+ }\
+
+
+#define I386_P6_PIII_NOT_PM_PME \
+ {.pme_name = "EMON_KNI_INST_RETIRED",\
+ .pme_code = 0xd8,\
+ .pme_desc = "Number of SSE instructions retired. Pentium III and
later",\
+ .pme_numasks = 2, \
+ .pme_umasks = { \
+ { .pme_uname = "PACKED_SCALAR", \
+ .pme_udesc = "packed and scalar instructions", \
+ .pme_ucode = 0x00 \
+ }, \
+ { .pme_uname = "SCALAR", \
+ .pme_udesc = "scalar only", \
+ .pme_ucode = 0x01 \
+ } \
+ } \
+ },\
+ {.pme_name = "EMON_KNI_COMP_INST_RET",\
+ .pme_code = 0xd9,\
+ .pme_desc = "Number of SSE computation instructions retired. Pentium
III and later",\
+ .pme_numasks = 2, \
+ .pme_umasks = { \
+ { .pme_uname = "PACKED_SCALAR", \
+ .pme_udesc = "packed and scalar instructions", \
+ .pme_ucode = 0x00 \
+ }, \
+ { .pme_uname = "SCALAR", \
+ .pme_udesc = "scalar only", \
+ .pme_ucode = 0x01 \
+ } \
+ } \
+ }\
+
+
+
#define I386_P6_COMMON_PME \
{.pme_name = "INST_RETIRED",\
.pme_code = 0xc0,\
@@ -468,53 +705,6 @@
"Counting is performed if it is the first or second half
or if it is blocked, squashed, "\
"or missed. In this context, misaligned means crossing a
64-bit boundary"\
},\
- {.pme_name = "EMON_KNI_PREF_DISPATCHED",\
- .pme_code = 0x07,\
- .pme_desc = "Number of Streaming SIMD extensions
prefetch/weakly-ordered instructions dispatched " \
- "(speculative prefetches are included in counting).
Pentium III and later",\
- .pme_numasks = 4, \
- .pme_umasks = { \
- { .pme_uname = "NTA", \
- .pme_udesc = "prefetch NTA", \
- .pme_ucode = 0x00 \
- }, \
- { .pme_uname = "T1", \
- .pme_udesc = "prefetch T1", \
- .pme_ucode = 0x01 \
- }, \
- { .pme_uname = "T2", \
- .pme_udesc = "prefetch T2", \
- .pme_ucode = 0x02 \
- }, \
- { .pme_uname = "WEAK", \
- .pme_udesc = "weakly ordered stores", \
- .pme_ucode = 0x03 \
- } \
- } \
- },\
- {.pme_name = "EMON_KNI_PREF_MISS",\
- .pme_code = 0x4b,\
- .pme_desc = "Number of prefetch/weakly-ordered instructions that miss
all caches. Pentium III and later",\
- .pme_numasks = 4, \
- .pme_umasks = { \
- { .pme_uname = "NTA", \
- .pme_udesc = "prefetch NTA", \
- .pme_ucode = 0x00 \
- }, \
- { .pme_uname = "T1", \
- .pme_udesc = "prefetch T1", \
- .pme_ucode = 0x01 \
- }, \
- { .pme_uname = "T2", \
- .pme_udesc = "prefetch T2", \
- .pme_ucode = 0x02 \
- }, \
- { .pme_uname = "WEAK", \
- .pme_udesc = "weakly ordered stores", \
- .pme_ucode = 0x03 \
- } \
- } \
- },\
{.pme_name = "UOPS_RETIRED",\
.pme_code = 0xc2,\
.pme_desc = "Number of micro-ops retired"\
@@ -523,36 +713,6 @@
.pme_code = 0xd0,\
.pme_desc = "Number of instructions decoded"\
},\
- {.pme_name = "EMON_KNI_INST_RETIRED",\
- .pme_code = 0xd8,\
- .pme_desc = "Number of SSE instructions retired. Pentium III and
later",\
- .pme_numasks = 2, \
- .pme_umasks = { \
- { .pme_uname = "PACKED_SCALAR", \
- .pme_udesc = "packed and scalar instructions", \
- .pme_ucode = 0x00 \
- }, \
- { .pme_uname = "SCALAR", \
- .pme_udesc = "scalar only", \
- .pme_ucode = 0x01 \
- } \
- } \
- },\
- {.pme_name = "EMON_KNI_COMP_INST_RET",\
- .pme_code = 0xd9,\
- .pme_desc = "Number of SSE computation instructions retired. Pentium
III and later",\
- .pme_numasks = 2, \
- .pme_umasks = { \
- { .pme_uname = "PACKED_SCALAR", \
- .pme_udesc = "packed and scalar instructions", \
- .pme_ucode = 0x00 \
- }, \
- { .pme_uname = "SCALAR", \
- .pme_udesc = "scalar only", \
- .pme_ucode = 0x01 \
- } \
- } \
- },\
{.pme_name = "HW_INT_RX",\
.pme_code = 0xc8,\
.pme_desc = "Number of hardware interrupts received"\
@@ -615,160 +775,59 @@
{.pme_name = "SEGMENT_REG_LOADS",\
.pme_code = 0x06,\
.pme_desc = "Number of segment register loads."\
- },\
- {.pme_name = "MMX_INSTR_EXEC",\
- .pme_code = 0xb0,\
- .pme_desc = "Number of MMX instructions executed"\
- },\
- {.pme_name = "MMX_SAT_INSTR_EXEC",\
- .pme_code = 0xb1,\
- .pme_desc = "Number of MMX saturating instructions executed"\
- },\
- {.pme_name = "MMX_UOPS_EXEC",\
- .pme_code = 0xb2,\
- .pme_desc = "Number of MMX micro-ops executed"\
- },\
- {.pme_name = "MMX_INSTR_TYPE_EXEC",\
- .pme_code = 0xb3,\
- .pme_desc = "Number of MMX instructions executed by type",\
- .pme_flags = PFMLIB_I386_P6_UMASK_COMBO, \
- .pme_numasks = 6, \
- .pme_umasks = { \
- { .pme_uname = "MUL", \
- .pme_udesc = "MMX packed multiply instructions executed", \
- .pme_ucode = 0x1 \
- }, \
- { .pme_uname = "SHIFT", \
- .pme_udesc = "MMX packed shift instructions executed", \
- .pme_ucode = 0x2 \
- }, \
- { .pme_uname = "PACK", \
- .pme_udesc = "MMX pack operation instructions executed", \
- .pme_ucode = 0x4 \
- }, \
- { .pme_uname = "UNPACK", \
- .pme_udesc = "MMX unpack operation instructions executed", \
- .pme_ucode = 0x8 \
- }, \
- { .pme_uname = "LOGICAL", \
- .pme_udesc = "MMX packed logical instructions executed", \
- .pme_ucode = 0x10 \
- }, \
- { .pme_uname = "ARITH", \
- .pme_udesc = "MMX packed arithmetic instructions executed", \
- .pme_ucode = 0x20 \
- } \
- }\
- },\
- {.pme_name = "FP_MMX_TRANS",\
- .pme_code = 0xcc,\
- .pme_desc = "Number of MMX transitions",\
- .pme_numasks = 2, \
- .pme_umasks = { \
- { .pme_uname = "TO_FP", \
- .pme_udesc = "from MMX instructions to floating-point
instructions", \
- .pme_ucode = 0x00 \
- }, \
- { .pme_uname = "TO_MMX", \
- .pme_udesc = "from floating-point instructions to MMX
instructions", \
- .pme_ucode = 0x01 \
- }\
- }\
- },\
- {.pme_name = "MMX_ASSIST",\
- .pme_code = 0xcd,\
- .pme_desc = "Number of MMX micro-ops executed"\
- },\
- {.pme_name = "MMX_INSTR_RET",\
- .pme_code = 0xce,\
- .pme_desc = "Number of MMX instructions retired"\
- },\
- {.pme_name = "SEG_RENAME_STALLS",\
- .pme_code = 0xd4,\
- .pme_desc = "Number of Segment Register Renaming Stalls", \
- .pme_flags = PFMLIB_I386_P6_UMASK_COMBO, \
- .pme_numasks = 4, \
- .pme_umasks = { \
- { .pme_uname = "ES", \
- .pme_udesc = "Segment register ES", \
- .pme_ucode = 0x1 \
- }, \
- { .pme_uname = "DS", \
- .pme_udesc = "Segment register DS", \
- .pme_ucode = 0x2 \
- }, \
- { .pme_uname = "FS", \
- .pme_udesc = "Segment register FS", \
- .pme_ucode = 0x4 \
- }, \
- { .pme_uname = "GS", \
- .pme_udesc = "Segment register GS", \
- .pme_ucode = 0x8 \
- } \
- }\
- },\
- {.pme_name = "SEG_REG_RENAMES",\
- .pme_code = 0xd5,\
- .pme_desc = "Number of Segment Register Renames", \
- .pme_flags = PFMLIB_I386_P6_UMASK_COMBO, \
- .pme_numasks = 4, \
- .pme_umasks = { \
- { .pme_uname = "ES", \
- .pme_udesc = "Segment register ES", \
- .pme_ucode = 0x1 \
- }, \
- { .pme_uname = "DS", \
- .pme_udesc = "Segment register DS", \
- .pme_ucode = 0x2 \
- }, \
- { .pme_uname = "FS", \
- .pme_udesc = "Segment register FS", \
- .pme_ucode = 0x4 \
- }, \
- { .pme_uname = "GS", \
- .pme_udesc = "Segment register GS", \
- .pme_ucode = 0x8 \
- } \
- }\
- },\
- {.pme_name = "RET_SEG_RENAMES",\
- .pme_code = 0xd6,\
- .pme_desc = "Number of segment register rename events retired"\
- }
+ }\
+
+
/*
- * Generic P6 processor event table
+ * Pentium Pro Processor Event Table
*/
-static pme_i386_p6_entry_t i386_p6_pe []={
- {.pme_name = "CPU_CLK_UNHALTED",
- .pme_code = 0x79,
- .pme_desc = "Number cycles during which the processor is not halted"
- },
- I386_P6_COMMON_PME,
- {.pme_name = "L2_LD",
- .pme_code = 0x29,
- .pme_desc = "Number of L2 data loads. This event indicates that a
normal, unlocked, load memory access "
- "was received by the L2. It includes only L2 cacheable memory
accesses; it does not include I/O "
- "accesses, other non-memory accesses, or memory accesses such
as UC/WT memory accesses. It does include "
- "L2 cacheable TLB miss memory accesses",
- I386_P6_MESI_UMASKS
- },
- {.pme_name = "L2_LINES_IN",
- .pme_code = 0x24,
- .pme_desc = "Number of lines allocated in the L2"
- },
- {.pme_name = "L2_LINES_OUT",
- .pme_code = 0x26,
- .pme_desc = "Number of lines removed from the L2 for any reason"
- },
- {.pme_name = "L2_M_LINES_OUTM",
- .pme_code = 0x27,
- .pme_desc = "Number of modified lines removed from the L2 for any
reason"
- }
+static pme_i386_p6_entry_t i386_ppro_pe []={
+
+ I386_P6_CPU_CLK_UNHALTED, /* should be first */
+ I386_P6_COMMON_PME, /* generic p6 */
+ I386_P6_NOT_PM_PME, /* generic p6 that conflict with Pentium M */
};
+
#define PME_I386_P6_CPU_CLK_UNHALTED 0
#define PME_I386_P6_INST_RETIRED 1
-#define PME_I386_P6_EVENT_COUNT
(sizeof(i386_p6_pe)/sizeof(pme_i386_p6_entry_t))
+#define PME_I386_PPRO_EVENT_COUNT
(sizeof(i386_ppro_pe)/sizeof(pme_i386_p6_entry_t))
+
+
+/*
+ * Pentium II Processor Event Table
+ */
+static pme_i386_p6_entry_t i386_pII_pe []={
+
+ I386_P6_CPU_CLK_UNHALTED, /* should be first */
+ I386_P6_COMMON_PME, /* generic p6 */
+ I386_P6_PII_ONLY_PME, /* pentium II only */
+ I386_P6_PII_PIII_PME, /* pentium II and later */
+ I386_P6_NOT_PM_PME, /* generic p6 that conflict with Pentium M */
+};
+
+#define PME_I386_P6_CPU_CLK_UNHALTED 0
+#define PME_I386_P6_INST_RETIRED 1
+#define PME_I386_PII_EVENT_COUNT
(sizeof(i386_pII_pe)/sizeof(pme_i386_p6_entry_t))
+
+
+/*
+ * Pentium III Processor Event Table
+ */
+static pme_i386_p6_entry_t i386_pIII_pe []={
+
+ I386_P6_CPU_CLK_UNHALTED, /* should be first */
+ I386_P6_COMMON_PME, /* generic p6 */
+ I386_P6_PII_PIII_PME, /* pentium II and later */
+ I386_P6_PIII_PME, /* pentium III and later */
+ I386_P6_NOT_PM_PME, /* generic p6 that conflict with Pentium M */
+ I386_P6_PIII_NOT_PM_PME /* pentium III that conflict with Pentium M */
+};
+
+#define PME_I386_P6_CPU_CLK_UNHALTED 0
+#define PME_I386_P6_INST_RETIRED 1
+#define PME_I386_PIII_EVENT_COUNT
(sizeof(i386_pIII_pe)/sizeof(pme_i386_p6_entry_t))
+
/*
* Pentium M event table
@@ -783,8 +842,10 @@
.pme_desc = "Number cycles during which the processor is not halted
and not in a thermal trip"
},
- I386_P6_COMMON_PME,
-
+ I386_P6_COMMON_PME, /* generic p6 */
+ I386_P6_PII_PIII_PME, /* pentium II and later */
+ I386_P6_PIII_PME, /* pentium III and later */
+
{.pme_name = "EMON_EST_TRANS",
.pme_code = 0x58,
.pme_desc = "Number of Enhanced Intel SpeedStep technology
transitions",
--- libpfm-3.2-071017/lib/pfmlib_i386_p6.c.orig 2007-10-30 20:17:42.000000000
-0500
+++ libpfm-3.2-071017/lib/pfmlib_i386_p6.c 2007-10-30 20:19:22.000000000
-0500
@@ -112,19 +112,33 @@
model = atoi(buffer);
switch(model) {
- case 3: /* Pentium II */
+ case 1: /* Pentium Pro */
+ i386_pe = i386_ppro_pe;
+ i386_p6_support.pme_count = PME_I386_PPRO_EVENT_COUNT;
+ i386_p6_num_events = PME_I386_PPRO_EVENT_COUNT;
+ break;
+
+ case 3: /* Pentium II Klamath */
case 5: /* Pentium II Deschutes */
+ case 6: /* Pentium II Mendocino */
+ i386_pe = i386_pII_pe;
+ i386_p6_support.pme_count = PME_I386_PII_EVENT_COUNT;
+ i386_p6_num_events = PME_I386_PII_EVENT_COUNT;
+ break;
+
case 7: /* Pentium III Katmai */
case 8: /* Pentium III Coppermine */
case 9: /* Mobile Pentium III */
case 10:/* Pentium III Cascades */
case 11:/* Pentium III Tualatin */
+ i386_pe = i386_pIII_pe;
+ i386_p6_support.pme_count = PME_I386_PIII_EVENT_COUNT;
+ i386_p6_num_events = PME_I386_PIII_EVENT_COUNT;
break;
+
default:
return PFMLIB_ERR_NOTSUPP;
}
- i386_pe = i386_p6_pe;
- i386_p6_num_events = PME_I386_P6_EVENT_COUNT;
return PFMLIB_SUCCESS;
}
@@ -487,7 +501,7 @@
pfm_pmu_support_t i386_p6_support={
.pmu_name = "Intel P6 Processor Family",
.pmu_type = PFMLIB_I386_P6_PMU,
- .pme_count = PME_I386_P6_EVENT_COUNT,
+ .pme_count = PME_I386_PPRO_EVENT_COUNT,
.pmc_count = PMU_I386_P6_NUM_PERFSEL,
.pmd_count = PMU_I386_P6_NUM_PERFCTR,
.num_cnt = PMU_I386_P6_NUM_COUNTERS,
_______________________________________________
perfmon mailing list
[email protected]
http://www.hpl.hp.com/hosted/linux/mail-archives/perfmon/
