Change 31362 by [EMAIL PROTECTED] on 2007/06/11 08:28:57
Subject: [PATCH] cross-compilation for linux
From: "Konovalov, Vadim Vladimirovich \(Vadim\)** CTR **" <[EMAIL
PROTECTED]>
Date: Sat, 9 Jun 2007 19:41:44 +0200
Message-ID: <[EMAIL PROTECTED]>
Affected files ...
... //depot/perl/Cross/Makefile-cross-SH#2 edit
... //depot/perl/Cross/README#9 edit
... //depot/perl/Cross/README.new#1 add
... //depot/perl/Cross/build-arm-n770-sh#2 edit
... //depot/perl/MANIFEST#1583 edit
... //depot/perl/README.ce#10 edit
... //depot/perl/win32/Makefile.ce#13 edit
Differences ...
==== //depot/perl/Cross/Makefile-cross-SH#2 (xtext) ====
Index: perl/Cross/Makefile-cross-SH
--- perl/Cross/Makefile-cross-SH#1~31296~ 2007-05-28 14:35:45.000000000
-0700
+++ perl/Cross/Makefile-cross-SH 2007-06-11 01:28:57.000000000 -0700
@@ -327,9 +327,7 @@
## In the following dollars and backticks do not need the extra backslash.
$spitshell >>$Makefile <<'!NO!SUBS!'
-XCOREDIR = ./xlib/$(CROSS_NAME)/CORE
-
-CONFIGPM = xlib/$(CROSS_NAME)/Config.pm xlib/$(CROSS_NAME)/Config_heavy.pl
+CONFIGPM = xlib/$(CROSS_NAME)/Config.pm
private = preplibrary $(CONFIGPM) $(CROSS_LIB)/Config.pod
@@ -766,17 +764,11 @@
$(LDLIBPTH) ./miniperl$(EXE_EXT) -Ilib mkppport
$(CROSS_LIB)/Config.pod: config.sh miniperl configpm Porting/Glossary
- $(LDLIBPTH) ./miniperl -Ilib configpm --cross=$(CROSS_NAME)
--heavy=$(CROSS_LIB)/Config_heavy.pl
- #TODO $(XCOPY) ..\*.h $(XCOREDIR)\*.*
- #TODO $(XCOPY) ..\*.inc $(XCOREDIR)\*.*
- #TODO $(XCOPY) *.h $(XCOREDIR)\*.*
- #TODO $(XCOPY) ..\ext\re\re.pm $(LIBDIR)\*.*
- #TODO $(RCOPY) include $(XCOREDIR)\*.*
- #TODO $(LDLIBPTH) ./miniperl -Ilib -MCross=$(CROSS_NAME) config_h.PL
"INST_VER=$(INST_VER)" "CORE_DIR=$(XCOREDIR)" "CONFIG_H=xconfig.h"
- #TODO cp xconfig.h $(CROSS_LIB)/config.h
- #TODO cp xconfig.h $(CROSS_LIB)/xconfig.h
+ $(LDLIBPTH) ./miniperl -Ilib configpm --cross=$(CROSS_NAME)
+ cp *.h $(CROSS_LIB)/
+ cp ext/re/re.pm $(LIBDIR)/
-$(CONFIGPM): $(CROSS_LIB)/Config.pod
+$(CONFIGPM): $(CROSS_LIB)/Config.pod xconfig.h
lib/re.pm: ext/re/re.pm
@-rm -f $@
@@ -1103,7 +1095,9 @@
xconfig.h: config_h.SH Cross/config-$(CROSS_NAME).sh
CONFIG_SH=Cross/config-$(CROSS_NAME).sh CONFIG_H=xconfig.h $(SHELL)
config_h.SH
+ #TODO $(LDLIBPTH) ./miniperl -Ilib -MCross=$(CROSS_NAME) config_h.PL
"INST_VER=$(INST_VER)" "CORE_DIR=$(CROSS_LIB)" "CONFIG_H=xconfig.h"
cp xconfig.h $(CROSS_LIB)/
+ cp xconfig.h $(CROSS_LIB)/config.h
# When done, touch perlmain.c so that it doesn't get remade each time.
.PHONY: depend
==== //depot/perl/Cross/README#9 (text) ====
Index: perl/Cross/README
--- perl/Cross/README#8~25015~ 2005-06-30 01:59:11.000000000 -0700
+++ perl/Cross/README 2007-06-11 01:28:57.000000000 -0700
@@ -34,17 +34,14 @@
Your built Perl environment is in install_me_here/ in your build
directory. From here you can package and deploy as you wish.
-The Obvious Ommissions
-----------------------
+Omissions
+----------
-This does NOT perform any installation as site installation method
-will be dependent on the target architecture and OS.
+This does NOT perform any installation.
-make test will NOT work as the binaries and libraries will not execute
-on your BUILD machine.
+Make test will NOT work.
-Due to space limitations on the Zaurus (it's a PDA) we do not provide
-documentation in the core - Therefore man pages are not even generated.
+We do not provide documentation in the core, man pages are not generated.
Other Targets (For Developers)
------------------------------
==== //depot/perl/Cross/README.new#1 (text) ====
Index: perl/Cross/README.new
--- /dev/null 2007-03-19 09:41:43.516454971 -0700
+++ perl/Cross/README.new 2007-06-11 01:28:57.000000000 -0700
@@ -0,0 +1,89 @@
+You're reading ./Cross/README.new, describing Perl cross-compilation process.
+NOTE: this file will replace ./Cross/README, after cross-compilation scheme
+will stabilize;
+
+=head1 Cross-compilation for linux
+
+This is second approach to linux cross-compiling, which should allow building
+full perl and entensions for target platform. Cross-compiling for linux
+uses similar approach and share same files as cross-compiling for WINCE.
+
+We refer to HOST as the platform where the build is performed, and to
+TARGET as where final executables will run.
+
+=head2 Basic ideas
+
+=head3 common
+
+Unlike WINCE, output files from GCC cross-compiler are produced in the same
+directory where C files are. All TARGET binaries have different extensions
+so to distinguish HOST and TARGET binaries. Namely, object files for C<arm>
+cross-compilation will have extension C<.armo>, executable files will have
+C<.arm>.
+
+After typical cross-compilation the following files will be built, among
+others:
+
+ sv.c
+ sv.o
+ sv.armo
+ libperl.arma
+
+(this approach may be reconsidered, however.)
+
+=head3 build process
+
+C<miniperl> is built. This executable is intended to run on HOST, and it
+will facilitate the remaining build process; all binaries built after it are
+foreign (TARGET) and should not run locally (HOST).
+
+Unlike HOST build, miniperl will not have C<Config.pm> of HOST within reach;
+it rather will use the C<Config.pm> from the cross-compilation directories.
+In fact, if the build process does have Config.pm within reach, this is only
+an indication of a mistake somewhere in the middle.
+
+ # following command is okay:
+ ./miniperl -Ilib -MCross -MConfig -e 1
+ # following command should cluck, and it is bad if it does not:
+ ./miniperl -Ilib -MConfig -e 1
+
+After C<miniperl> is built, C<configpm> is invoked to create right C<Config.pm>
+in right place and its corresponding Cross.pm.
+
+File C<Cross.pm> is dead simple: for given cross-architecture places in @INC
+a path where perl modules are, and right C<Config.pm> in that place.
+
+That said, C<miniperl -Ilib -MConfig -we 1> should report an error, because
+it can not find C<Config.pm>. If it does not give an error -- wrong
C<Config.pm>
+is substituted, and resulting binaries will be a mess.
+
+C<miniperl -MCross -MConfig -we 1> should run okay, and it will provide right
+C<Config.pm> for further compilations.
+
+During extensions build phase, the script C<./ext/util/make_ext_cross> is
+invoked.
+
+All invokes of C<Makefile.PL> are provided with C<-MCross> so to enable cross-
+compile.
+
+=head2 BUILD
+
+=head3 Tools & SDK
+
+For compiling, you need following:
+
+=over 4
+
+=item * TODO
+
+=back
+
+=head1 Things to be done
+
+=over 4
+
+=item * better distinguishing of config.h/xconfig.h, dependancies
+
+=item * object files created in ./xlib/cross-name/ ?
+
+=back
==== //depot/perl/Cross/build-arm-n770-sh#2 (xtext) ====
Index: perl/Cross/build-arm-n770-sh
--- perl/Cross/build-arm-n770-sh#1~31296~ 2007-05-28 14:35:45.000000000
-0700
+++ perl/Cross/build-arm-n770-sh 2007-06-11 01:28:57.000000000 -0700
@@ -3,6 +3,8 @@
# this approach is like Perl-CE cross-compiling, and allows
# for full TARGET perl (as opposed to renamed miniperl)
+# to skip Configure/build for HOST miniperl, pass "noconf" argument to this
script
+
# some trick is different, however - the file extension for objects files
# are choosen to be .${CROSS_NAME}, .armo in our case
@@ -31,8 +33,7 @@
# following should be done better:
cd ..
-if false
-then
+if [[ "x$1" != xnoconf* ]] ; then
# do miniperl on HOST
./Configure -des -D prefix=./dummy -Dusedevel
make miniperl
@@ -57,10 +58,8 @@
rm cflags-cross-$CROSS_NAME
cp Cross/cflags-cross-$CROSS_NAME .
rm Makefile-cross-$CROSS_NAME
-sh Cross/Makefile-cross.SH
+sh Cross/Makefile-cross-SH
cp Cross/Makefile-cross-$CROSS_NAME .
-# makefile hack-patching TODO generation from Makefile.SH
-#./miniperl -pi.bak -w0777ne
"s{^(CCCMD.*?)cflags}{\$1cflags-cross-$CROSS_NAME}gm" Makefile-cross-$CROSS_NAME
mkdir xlib
mkdir xlib/$CROSS_NAME
==== //depot/perl/MANIFEST#1583 (text) ====
Index: perl/MANIFEST
--- perl/MANIFEST#1582~31341~ 2007-06-06 07:42:01.000000000 -0700
+++ perl/MANIFEST 2007-06-11 01:28:57.000000000 -0700
@@ -36,6 +36,7 @@
Cross/Makefile-cross-SH Cross-compilation
Cross/cflags-cross-arm Cross-compilation
Cross/README Cross-compilation
+Cross/README.new Cross-compilation
Cross/TODO Cross-compilation
Cross/warp Cross-compilation
cv.h Code value header
==== //depot/perl/README.ce#10 (text) ====
Index: perl/README.ce
--- perl/README.ce#9~29145~ 2006-10-29 23:17:18.000000000 -0800
+++ perl/README.ce 2007-06-11 01:28:57.000000000 -0700
@@ -39,7 +39,7 @@
a path where perl modules are, and right C<Config.pm> in that place.
That said, C<miniperl -Ilib -MConfig -we 1> should report an error, because
-it can not find C<Config.pm>. If it does not gives an error -- wrong
C<Config.pm>
+it can not find C<Config.pm>. If it does not give an error -- wrong
C<Config.pm>
is substituted, and resulting binaries will be a mess.
C<miniperl -MCross -MConfig -we 1> should run okay, and it will provide right
==== //depot/perl/win32/Makefile.ce#13 (text) ====
Index: perl/win32/Makefile.ce
--- perl/win32/Makefile.ce#12~31245~ 2007-05-20 16:10:15.000000000 -0700
+++ perl/win32/Makefile.ce 2007-06-11 01:28:57.000000000 -0700
@@ -710,7 +710,7 @@
$(DYNALOADER)$(o) : $(DYNALOADER).c xconfig.h $(EXTDIR)\DynaLoader\dlutils.c
-$(CONFIGPM) : $(HPERL) ..\config.sh config_h.PL ..\minimod.pl
+$(CONFIGPM) : $(HPERL) ..\config.sh .\xconfig.h config_h.PL ..\minimod.pl
cd .. && $(HPERL) configpm --cross=$(CROSS_NAME) --no-glossary
-mkdir $(XCOREDIR)
$(XCOPY) ..\*.h $(XCOREDIR)\*.*
@@ -718,12 +718,12 @@
$(XCOPY) *.h $(XCOREDIR)\*.*
$(XCOPY) ..\ext\re\re.pm $(LIBDIR)\*.*
$(RCOPY) include $(XCOREDIR)\*.*
- -$(HPERL) -I..\lib -MCross=$(CROSS_NAME) config_h.PL
"INST_VER=$(INST_VER)" "CORE_DIR=$(XCOREDIR)" "CONFIG_H=xconfig.h"
- $(XCOPY) xconfig.h $(XCOREDIR)\config.h
.\xconfig.h:
-del /f xconfig.h
- copy config_H.ce xconfig.h
+ -mkdir $(XCOREDIR)
+ -$(HPERL) -I..\lib -MCross=$(CROSS_NAME) config_h.PL
"INST_VER=$(INST_VER)" "CORE_DIR=$(XCOREDIR)" "CONFIG_H=xconfig.h"
+ $(XCOPY) xconfig.h $(XCOREDIR)\config.h
..\config.sh: config.ce config_sh.PL
$(HPERL) -I..\lib -I. config_sh.PL $(CFG_VARS) config.ce > ..\config.sh
End of Patch.
