Change 34115 by [EMAIL PROTECTED] on 2008/07/09 14:02:30
Update Win32 canned configs
Adds new values introduced by #34105/34107, incorporating this patch:
Subject: RE: New probes
From: "Jan Dubois" <[EMAIL PROTECTED]>
Date: Mon, 7 Jul 2008 15:58:48 -0700
Message-ID: <[EMAIL PROTECTED]>
The appropriate values for the other compilers were determined by
running the probe functions added to Configure by #34105/34112/34114.
(Note that VC8 requires an invalid parameter handler to run those
functions without crashing, and both VC8 and VC9 need %I64d rather
than %ld to output the appropriate values.)
Also applies the changes to the config_H.* files, together with changes
for #33597/33598/33949 which never got added to them.
Affected files ...
... //depot/perl/win32/config.bc#182 edit
... //depot/perl/win32/config.gc#181 edit
... //depot/perl/win32/config.vc#190 edit
... //depot/perl/win32/config.vc64#60 edit
... //depot/perl/win32/config_H.bc#180 edit
... //depot/perl/win32/config_H.gc#174 edit
... //depot/perl/win32/config_H.vc#177 edit
... //depot/perl/win32/config_H.vc64#59 edit
... //depot/perl/win32/config_sh.PL#46 edit
Differences ...
==== //depot/perl/win32/config.bc#182 (text) ====
Index: perl/win32/config.bc
--- perl/win32/config.bc#181~33949~ 2008-05-29 10:48:27.000000000 -0700
+++ perl/win32/config.bc 2008-07-09 07:02:30.000000000 -0700
@@ -471,6 +471,7 @@
d_telldir='define'
d_telldirproto='define'
d_time='define'
+d_timegm='undef'
d_times='define'
d_tm_tm_gmtoff='undef'
d_tm_tm_zone='undef'
@@ -859,6 +860,8 @@
rmail=''
run=''
runnm='true'
+sGMTIME_max="2147483647"
+sGMTIME_min="-2147483648"
sPRIEUldbl='"E"'
sPRIFUldbl='"F"'
sPRIGUldbl='"G"'
==== //depot/perl/win32/config.gc#181 (text) ====
Index: perl/win32/config.gc
--- perl/win32/config.gc#180~33949~ 2008-05-29 10:48:27.000000000 -0700
+++ perl/win32/config.gc 2008-07-09 07:02:30.000000000 -0700
@@ -471,6 +471,7 @@
d_telldir='define'
d_telldirproto='define'
d_time='define'
+d_timegm='undef'
d_times='define'
d_tm_tm_gmtoff='undef'
d_tm_tm_zone='undef'
@@ -859,6 +860,8 @@
rmail=''
run=''
runnm='true'
+sGMTIME_max="2147483647"
+sGMTIME_min="0"
sPRIEUldbl='"E"'
sPRIFUldbl='"F"'
sPRIGUldbl='"G"'
==== //depot/perl/win32/config.vc#190 (text) ====
Index: perl/win32/config.vc
--- perl/win32/config.vc#189~33949~ 2008-05-29 10:48:27.000000000 -0700
+++ perl/win32/config.vc 2008-07-09 07:02:30.000000000 -0700
@@ -471,6 +471,7 @@
d_telldir='define'
d_telldirproto='define'
d_time='define'
+d_timegm='undef'
d_times='define'
d_tm_tm_gmtoff='undef'
d_tm_tm_zone='undef'
@@ -859,6 +860,8 @@
rmail=''
run=''
runnm='true'
+sGMTIME_max="2147483647"
+sGMTIME_min="0"
sPRIEUldbl='"E"'
sPRIFUldbl='"F"'
sPRIGUldbl='"G"'
==== //depot/perl/win32/config.vc64#60 (text) ====
Index: perl/win32/config.vc64
--- perl/win32/config.vc64#59~33949~ 2008-05-29 10:48:27.000000000 -0700
+++ perl/win32/config.vc64 2008-07-09 07:02:30.000000000 -0700
@@ -471,6 +471,7 @@
d_telldir='define'
d_telldirproto='define'
d_time='define'
+d_timegm='undef'
d_times='define'
d_tm_tm_gmtoff='undef'
d_tm_tm_zone='undef'
@@ -859,6 +860,8 @@
rmail=''
run=''
runnm='true'
+sGMTIME_max="2147483647"
+sGMTIME_min="0"
sPRIEUldbl='"E"'
sPRIFUldbl='"F"'
sPRIGUldbl='"G"'
==== //depot/perl/win32/config_H.bc#180 (text+w) ====
Index: perl/win32/config_H.bc
--- perl/win32/config_H.bc#179~33350~ 2008-02-22 10:12:36.000000000 -0800
+++ perl/win32/config_H.bc 2008-07-09 07:02:30.000000000 -0700
@@ -13,7 +13,7 @@
/*
* Package name : perl5
* Source directory :
- * Configuration time: Fri Feb 22 17:41:50 2008
+ * Configuration time: Wed Jul 9 14:12:37 2008
* Configured by : shay
* Target system :
*/
@@ -68,6 +68,12 @@
*/
#define HAS_CHSIZE /**/
+/* HAS_CRYPT:
+ * This symbol, if defined, indicates that the crypt routine is available
+ * to encrypt passwords and the like.
+ */
+/*#define HAS_CRYPT /**/
+
/* HAS_CTERMID:
* This symbol, if defined, indicates that the ctermid routine is
* available to generate filename for terminal.
@@ -101,6 +107,26 @@
*/
#define HAS_DLERROR /**/
+/* SETUID_SCRIPTS_ARE_SECURE_NOW:
+ * This symbol, if defined, indicates that the bug that prevents
+ * setuid scripts from being secure is not present in this kernel.
+ */
+/* DOSUID:
+ * This symbol, if defined, indicates that the C program should
+ * check the script that it is executing for setuid/setgid bits, and
+ * attempt to emulate setuid/setgid on systems that have disabled
+ * setuid #! scripts because the kernel can't do it securely.
+ * It is up to the package designer to make sure that this emulation
+ * is done securely. Among other things, it should do an fstat on
+ * the script it just opened to make sure it really is a setuid/setgid
+ * script, it should make sure the arguments passed correspond exactly
+ * to the argument on the #! line, and it should not trust any
+ * subprocesses to which it must pass the filename rather than the
+ * file descriptor of the script to be executed.
+ */
+/*#define SETUID_SCRIPTS_ARE_SECURE_NOW /**/
+/*#define DOSUID /**/
+
/* HAS_DUP2:
* This symbol, if defined, indicates that the dup2 routine is
* available to duplicate file descriptors.
@@ -344,6 +370,13 @@
*/
#define HAS_PIPE /**/
+/* HAS_POLL:
+ * This symbol, if defined, indicates that the poll routine is
+ * available to poll active file descriptors. Please check I_POLL and
+ * I_SYS_POLL to know which header should be included as well.
+ */
+/*#define HAS_POLL /**/
+
/* HAS_READDIR:
* This symbol, if defined, indicates that the readdir routine is
* available to read directory entries. You may have to include
@@ -408,6 +441,13 @@
*/
/*#define HAS_SETEUID /**/
+/* HAS_SETGROUPS:
+ * This symbol, if defined, indicates that the setgroups() routine is
+ * available to set the list of process groups. If unavailable, multiple
+ * groups are probably not supported.
+ */
+/*#define HAS_SETGROUPS /**/
+
/* HAS_SETLINEBUF:
* This symbol, if defined, indicates that the setlinebuf routine is
* available to change stderr or stdout from block-buffered or unbuffered
@@ -602,6 +642,19 @@
*/
#define HAS_WCTOMB /**/
+/* Groups_t:
+ * This symbol holds the type used for the second argument to
+ * getgroups() and setgroups(). Usually, this is the same as
+ * gidtype (gid_t) , but sometimes it isn't.
+ * It can be int, ushort, gid_t, etc...
+ * It may be necessary to include <sys/types.h> to get any
+ * typedef'ed information. This is only required if you have
+ * getgroups() or setgroups()..
+ */
+#if defined(HAS_GETGROUPS) || defined(HAS_SETGROUPS)
+#define Groups_t gid_t /* Type for 2nd arg to [sg]etgroups() */
+#endif
+
/* I_ARPA_INET:
* This symbol, if defined, indicates to the C program that it should
* include <arpa/inet.h> to get inet_addr and friends declarations.
@@ -733,6 +786,13 @@
*/
/*#define I_SYS_PARAM /**/
+/* I_SYS_POLL:
+ * This symbol, if defined, indicates that the program may include
+ * <sys/poll.h>. When I_POLL is also defined, it's probably safest
+ * to only include <poll.h>.
+ */
+/*#define I_SYS_POLL /**/
+
/* I_SYS_RESOURCE:
* This symbol, if defined, indicates to the C program that it should
* include <sys/resource.h>.
@@ -1036,12 +1096,6 @@
#define const
#endif
-/* HAS_CRYPT:
- * This symbol, if defined, indicates that the crypt routine is available
- * to encrypt passwords and the like.
- */
-/*#define HAS_CRYPT /**/
-
/* HAS_CRYPT_R:
* This symbol, if defined, indicates that the crypt_r routine
* is available to crypt re-entrantly.
@@ -1092,26 +1146,6 @@
/*#define HAS_CTIME_R /**/
#define CTIME_R_PROTO 0 /**/
-/* SETUID_SCRIPTS_ARE_SECURE_NOW:
- * This symbol, if defined, indicates that the bug that prevents
- * setuid scripts from being secure is not present in this kernel.
- */
-/* DOSUID:
- * This symbol, if defined, indicates that the C program should
- * check the script that it is executing for setuid/setgid bits, and
- * attempt to emulate setuid/setgid on systems that have disabled
- * setuid #! scripts because the kernel can't do it securely.
- * It is up to the package designer to make sure that this emulation
- * is done securely. Among other things, it should do an fstat on
- * the script it just opened to make sure it really is a setuid/setgid
- * script, it should make sure the arguments passed correspond exactly
- * to the argument on the #! line, and it should not trust any
- * subprocesses to which it must pass the filename rather than the
- * file descriptor of the script to be executed.
- */
-/*#define SETUID_SCRIPTS_ARE_SECURE_NOW /**/
-/*#define DOSUID /**/
-
/* HAS_DRAND48_R:
* This symbol, if defined, indicates that the drand48_r routine
* is available to drand48 re-entrantly.
@@ -1804,13 +1838,6 @@
*/
/*#define HAS_MSG /**/
-/* HAS_POLL:
- * This symbol, if defined, indicates that the poll routine is
- * available to poll active file descriptors. Please check I_POLL and
- * I_SYS_POLL to know which header should be included as well.
- */
-/*#define HAS_POLL /**/
-
/* OLD_PTHREAD_CREATE_JOINABLE:
* This symbol, if defined, indicates how to create pthread
* in joinable (aka undetached) state. NOTE: not defined
@@ -1910,13 +1937,6 @@
/*#define HAS_SETGRENT_R /**/
#define SETGRENT_R_PROTO 0 /**/
-/* HAS_SETGROUPS:
- * This symbol, if defined, indicates that the setgroups() routine is
- * available to set the list of process groups. If unavailable, multiple
- * groups are probably not supported.
- */
-/*#define HAS_SETGROUPS /**/
-
/* HAS_SETHOSTENT:
* This symbol, if defined, indicates that the sethostent() routine is
* available.
@@ -2316,19 +2336,6 @@
*/
#define Gid_t gid_t /* Type for getgid(), etc... */
-/* Groups_t:
- * This symbol holds the type used for the second argument to
- * getgroups() and setgroups(). Usually, this is the same as
- * gidtype (gid_t) , but sometimes it isn't.
- * It can be int, ushort, gid_t, etc...
- * It may be necessary to include <sys/types.h> to get any
- * typedef'ed information. This is only required if you have
- * getgroups() or setgroups()..
- */
-#if defined(HAS_GETGROUPS) || defined(HAS_SETGROUPS)
-#define Groups_t gid_t /* Type for 2nd arg to [sg]etgroups() */
-#endif
-
/* I_DIRENT:
* This symbol, if defined, indicates to the C program that it should
* include <dirent.h>. Using this symbol also triggers the definition
@@ -2370,7 +2377,19 @@
* This symbol, if defined, indicates that <ndbm.h> exists and should
* be included.
*/
+/* I_GDBMNDBM:
+ * This symbol, if defined, indicates that <gdbm/ndbm.h> exists and should
+ * be included. This was the location of the ndbm.h compatibility file
+ * in RedHat 7.1.
+ */
+/* I_GDBM_NDBM:
+ * This symbol, if defined, indicates that <gdbm-ndbm.h> exists and should
+ * be included. This is the location of the ndbm.h compatibility file
+ * in Debian 4.0.
+ */
/*#define I_NDBM /**/
+/*#define I_GDBMNDBM /**/
+/*#define I_GDBM_NDBM /**/
/* I_NETDB:
* This symbol, if defined, indicates that <netdb.h> exists and
@@ -2710,12 +2729,6 @@
*/
#define Sock_size_t int /**/
-/* STDCHAR:
- * This symbol is defined to be the type of char used in stdio.h.
- * It has the values "unsigned char" or "char".
- */
-#define STDCHAR unsigned char /**/
-
/* Uid_t_f:
* This symbol defines the format string used for printing a Uid_t.
*/
@@ -3224,6 +3237,12 @@
*/
/*#define EBCDIC /**/
+/* STDCHAR:
+ * This symbol is defined to be the type of char used in stdio.h.
+ * It has the values "unsigned char" or "char".
+ */
+#define STDCHAR unsigned char /**/
+
/* HAS_ATOLF:
* This symbol, if defined, indicates that the atolf routine is
* available to convert strings into long doubles.
@@ -3918,6 +3937,12 @@
*/
#define HAS_TELLDIR_PROTO /**/
+/* HAS_TIMEGM:
+ * This symbol, if defined, indicates that the timegm routine is
+ * available to do the opposite of gmtime ()
+ */
+/*#define HAS_TIMEGM /**/
+
/* U32_ALIGNMENT_REQUIRED:
* This symbol, if defined, indicates that you must access
* character data through U32-aligned pointers.
@@ -4063,6 +4088,12 @@
*/
/*#define I_LIBUTIL /**/
+/* I_MALLOCMALLOC:
+ * This symbol, if defined, indicates to the C program that it should
+ * include <malloc/malloc.h>.
+ */
+/*#define I_MALLOCMALLOC /**/
+
/* I_MNTENT:
* This symbol, if defined, indicates that <mntent.h> exists and
* should be included.
@@ -4388,6 +4419,17 @@
#define STDIO_STREAM_ARRAY
#endif
+/* GMTIME_MAX:
+ * This symbol contains the maximum value for the time_t offset that
+ * the system function gmtime () accepts, and defaults to 0
+ */
+/* GMTIME_MIN:
+ * This symbol contains the minimum value for the time_t offset that
+ * the system function gmtime () accepts, and defaults to 0
+ */
+#define GMTIME_MAX 2147483647 /**/
+#define GMTIME_MIN -2147483648 /**/
+
/* USE_64_BIT_INT:
* This symbol, if defined, indicates that 64-bit integers should
* be used when available. If not defined, the native integers
==== //depot/perl/win32/config_H.gc#174 (text+w) ====
Index: perl/win32/config_H.gc
--- perl/win32/config_H.gc#173~33350~ 2008-02-22 10:12:36.000000000 -0800
+++ perl/win32/config_H.gc 2008-07-09 07:02:30.000000000 -0700
@@ -13,7 +13,7 @@
/*
* Package name : perl5
* Source directory :
- * Configuration time: Fri Feb 22 17:35:20 2008
+ * Configuration time: Wed Jul 9 14:03:35 2008
* Configured by : shay
* Target system :
*/
@@ -68,6 +68,12 @@
*/
#define HAS_CHSIZE /**/
+/* HAS_CRYPT:
+ * This symbol, if defined, indicates that the crypt routine is available
+ * to encrypt passwords and the like.
+ */
+/*#define HAS_CRYPT /**/
+
/* HAS_CTERMID:
* This symbol, if defined, indicates that the ctermid routine is
* available to generate filename for terminal.
@@ -101,6 +107,26 @@
*/
#define HAS_DLERROR /**/
+/* SETUID_SCRIPTS_ARE_SECURE_NOW:
+ * This symbol, if defined, indicates that the bug that prevents
+ * setuid scripts from being secure is not present in this kernel.
+ */
+/* DOSUID:
+ * This symbol, if defined, indicates that the C program should
+ * check the script that it is executing for setuid/setgid bits, and
+ * attempt to emulate setuid/setgid on systems that have disabled
+ * setuid #! scripts because the kernel can't do it securely.
+ * It is up to the package designer to make sure that this emulation
+ * is done securely. Among other things, it should do an fstat on
+ * the script it just opened to make sure it really is a setuid/setgid
+ * script, it should make sure the arguments passed correspond exactly
+ * to the argument on the #! line, and it should not trust any
+ * subprocesses to which it must pass the filename rather than the
+ * file descriptor of the script to be executed.
+ */
+/*#define SETUID_SCRIPTS_ARE_SECURE_NOW /**/
+/*#define DOSUID /**/
+
/* HAS_DUP2:
* This symbol, if defined, indicates that the dup2 routine is
* available to duplicate file descriptors.
@@ -344,6 +370,13 @@
*/
#define HAS_PIPE /**/
+/* HAS_POLL:
+ * This symbol, if defined, indicates that the poll routine is
+ * available to poll active file descriptors. Please check I_POLL and
+ * I_SYS_POLL to know which header should be included as well.
+ */
+/*#define HAS_POLL /**/
+
/* HAS_READDIR:
* This symbol, if defined, indicates that the readdir routine is
* available to read directory entries. You may have to include
@@ -408,6 +441,13 @@
*/
/*#define HAS_SETEUID /**/
+/* HAS_SETGROUPS:
+ * This symbol, if defined, indicates that the setgroups() routine is
+ * available to set the list of process groups. If unavailable, multiple
+ * groups are probably not supported.
+ */
+/*#define HAS_SETGROUPS /**/
+
/* HAS_SETLINEBUF:
* This symbol, if defined, indicates that the setlinebuf routine is
* available to change stderr or stdout from block-buffered or unbuffered
@@ -602,6 +642,19 @@
*/
#define HAS_WCTOMB /**/
+/* Groups_t:
+ * This symbol holds the type used for the second argument to
+ * getgroups() and setgroups(). Usually, this is the same as
+ * gidtype (gid_t) , but sometimes it isn't.
+ * It can be int, ushort, gid_t, etc...
+ * It may be necessary to include <sys/types.h> to get any
+ * typedef'ed information. This is only required if you have
+ * getgroups() or setgroups()..
+ */
+#if defined(HAS_GETGROUPS) || defined(HAS_SETGROUPS)
+#define Groups_t gid_t /* Type for 2nd arg to [sg]etgroups() */
+#endif
+
/* I_ARPA_INET:
* This symbol, if defined, indicates to the C program that it should
* include <arpa/inet.h> to get inet_addr and friends declarations.
@@ -733,6 +786,13 @@
*/
/*#define I_SYS_PARAM /**/
+/* I_SYS_POLL:
+ * This symbol, if defined, indicates that the program may include
+ * <sys/poll.h>. When I_POLL is also defined, it's probably safest
+ * to only include <poll.h>.
+ */
+/*#define I_SYS_POLL /**/
+
/* I_SYS_RESOURCE:
* This symbol, if defined, indicates to the C program that it should
* include <sys/resource.h>.
@@ -1051,12 +1111,6 @@
#define const
#endif
-/* HAS_CRYPT:
- * This symbol, if defined, indicates that the crypt routine is available
- * to encrypt passwords and the like.
- */
-/*#define HAS_CRYPT /**/
-
/* HAS_CRYPT_R:
* This symbol, if defined, indicates that the crypt_r routine
* is available to crypt re-entrantly.
@@ -1107,26 +1161,6 @@
/*#define HAS_CTIME_R /**/
#define CTIME_R_PROTO 0 /**/
-/* SETUID_SCRIPTS_ARE_SECURE_NOW:
- * This symbol, if defined, indicates that the bug that prevents
- * setuid scripts from being secure is not present in this kernel.
- */
-/* DOSUID:
- * This symbol, if defined, indicates that the C program should
- * check the script that it is executing for setuid/setgid bits, and
- * attempt to emulate setuid/setgid on systems that have disabled
- * setuid #! scripts because the kernel can't do it securely.
- * It is up to the package designer to make sure that this emulation
- * is done securely. Among other things, it should do an fstat on
- * the script it just opened to make sure it really is a setuid/setgid
- * script, it should make sure the arguments passed correspond exactly
- * to the argument on the #! line, and it should not trust any
- * subprocesses to which it must pass the filename rather than the
- * file descriptor of the script to be executed.
- */
-/*#define SETUID_SCRIPTS_ARE_SECURE_NOW /**/
-/*#define DOSUID /**/
-
/* HAS_DRAND48_R:
* This symbol, if defined, indicates that the drand48_r routine
* is available to drand48 re-entrantly.
@@ -1823,13 +1857,6 @@
*/
/*#define HAS_MSG /**/
-/* HAS_POLL:
- * This symbol, if defined, indicates that the poll routine is
- * available to poll active file descriptors. Please check I_POLL and
- * I_SYS_POLL to know which header should be included as well.
- */
-/*#define HAS_POLL /**/
-
/* OLD_PTHREAD_CREATE_JOINABLE:
* This symbol, if defined, indicates how to create pthread
* in joinable (aka undetached) state. NOTE: not defined
@@ -1929,13 +1956,6 @@
/*#define HAS_SETGRENT_R /**/
#define SETGRENT_R_PROTO 0 /**/
-/* HAS_SETGROUPS:
- * This symbol, if defined, indicates that the setgroups() routine is
- * available to set the list of process groups. If unavailable, multiple
- * groups are probably not supported.
- */
-/*#define HAS_SETGROUPS /**/
-
/* HAS_SETHOSTENT:
* This symbol, if defined, indicates that the sethostent() routine is
* available.
@@ -2335,19 +2355,6 @@
*/
#define Gid_t gid_t /* Type for getgid(), etc... */
-/* Groups_t:
- * This symbol holds the type used for the second argument to
- * getgroups() and setgroups(). Usually, this is the same as
- * gidtype (gid_t) , but sometimes it isn't.
- * It can be int, ushort, gid_t, etc...
- * It may be necessary to include <sys/types.h> to get any
- * typedef'ed information. This is only required if you have
- * getgroups() or setgroups()..
- */
-#if defined(HAS_GETGROUPS) || defined(HAS_SETGROUPS)
-#define Groups_t gid_t /* Type for 2nd arg to [sg]etgroups() */
-#endif
-
/* I_DIRENT:
* This symbol, if defined, indicates to the C program that it should
* include <dirent.h>. Using this symbol also triggers the definition
@@ -2389,7 +2396,19 @@
* This symbol, if defined, indicates that <ndbm.h> exists and should
* be included.
*/
+/* I_GDBMNDBM:
+ * This symbol, if defined, indicates that <gdbm/ndbm.h> exists and should
+ * be included. This was the location of the ndbm.h compatibility file
+ * in RedHat 7.1.
+ */
+/* I_GDBM_NDBM:
+ * This symbol, if defined, indicates that <gdbm-ndbm.h> exists and should
+ * be included. This is the location of the ndbm.h compatibility file
+ * in Debian 4.0.
+ */
/*#define I_NDBM /**/
+/*#define I_GDBMNDBM /**/
+/*#define I_GDBM_NDBM /**/
/* I_NETDB:
* This symbol, if defined, indicates that <netdb.h> exists and
@@ -2729,12 +2748,6 @@
*/
#define Sock_size_t int /**/
-/* STDCHAR:
- * This symbol is defined to be the type of char used in stdio.h.
- * It has the values "unsigned char" or "char".
- */
-#define STDCHAR char /**/
-
/* Uid_t_f:
* This symbol defines the format string used for printing a Uid_t.
*/
@@ -3245,6 +3258,12 @@
*/
/*#define EBCDIC /**/
+/* STDCHAR:
+ * This symbol is defined to be the type of char used in stdio.h.
+ * It has the values "unsigned char" or "char".
+ */
+#define STDCHAR char /**/
+
/* HAS_ATOLF:
* This symbol, if defined, indicates that the atolf routine is
* available to convert strings into long doubles.
@@ -3939,6 +3958,12 @@
*/
#define HAS_TELLDIR_PROTO /**/
+/* HAS_TIMEGM:
+ * This symbol, if defined, indicates that the timegm routine is
+ * available to do the opposite of gmtime ()
+ */
+/*#define HAS_TIMEGM /**/
+
/* U32_ALIGNMENT_REQUIRED:
* This symbol, if defined, indicates that you must access
* character data through U32-aligned pointers.
@@ -4084,6 +4109,12 @@
*/
/*#define I_LIBUTIL /**/
+/* I_MALLOCMALLOC:
+ * This symbol, if defined, indicates to the C program that it should
+ * include <malloc/malloc.h>.
+ */
+/*#define I_MALLOCMALLOC /**/
+
/* I_MNTENT:
* This symbol, if defined, indicates that <mntent.h> exists and
* should be included.
@@ -4414,6 +4445,17 @@
#define STDIO_STREAM_ARRAY
#endif
+/* GMTIME_MAX:
+ * This symbol contains the maximum value for the time_t offset that
+ * the system function gmtime () accepts, and defaults to 0
+ */
+/* GMTIME_MIN:
+ * This symbol contains the minimum value for the time_t offset that
+ * the system function gmtime () accepts, and defaults to 0
+ */
+#define GMTIME_MAX 2147483647 /**/
+#define GMTIME_MIN 0 /**/
+
/* USE_64_BIT_INT:
* This symbol, if defined, indicates that 64-bit integers should
* be used when available. If not defined, the native integers
==== //depot/perl/win32/config_H.vc#177 (text+w) ====
Index: perl/win32/config_H.vc
--- perl/win32/config_H.vc#176~33350~ 2008-02-22 10:12:36.000000000 -0800
+++ perl/win32/config_H.vc 2008-07-09 07:02:30.000000000 -0700
@@ -13,7 +13,7 @@
/*
* Package name : perl5
* Source directory :
- * Configuration time: Fri Feb 22 17:17:01 2008
+ * Configuration time: Wed Jul 9 13:18:23 2008
* Configured by : shay
* Target system :
*/
@@ -68,6 +68,12 @@
*/
#define HAS_CHSIZE /**/
+/* HAS_CRYPT:
+ * This symbol, if defined, indicates that the crypt routine is available
+ * to encrypt passwords and the like.
+ */
+/*#define HAS_CRYPT /**/
+
/* HAS_CTERMID:
* This symbol, if defined, indicates that the ctermid routine is
* available to generate filename for terminal.
@@ -101,6 +107,26 @@
*/
#define HAS_DLERROR /**/
+/* SETUID_SCRIPTS_ARE_SECURE_NOW:
+ * This symbol, if defined, indicates that the bug that prevents
+ * setuid scripts from being secure is not present in this kernel.
+ */
+/* DOSUID:
+ * This symbol, if defined, indicates that the C program should
+ * check the script that it is executing for setuid/setgid bits, and
+ * attempt to emulate setuid/setgid on systems that have disabled
+ * setuid #! scripts because the kernel can't do it securely.
+ * It is up to the package designer to make sure that this emulation
+ * is done securely. Among other things, it should do an fstat on
+ * the script it just opened to make sure it really is a setuid/setgid
+ * script, it should make sure the arguments passed correspond exactly
+ * to the argument on the #! line, and it should not trust any
+ * subprocesses to which it must pass the filename rather than the
+ * file descriptor of the script to be executed.
+ */
+/*#define SETUID_SCRIPTS_ARE_SECURE_NOW /**/
+/*#define DOSUID /**/
+
/* HAS_DUP2:
* This symbol, if defined, indicates that the dup2 routine is
* available to duplicate file descriptors.
@@ -344,6 +370,13 @@
*/
#define HAS_PIPE /**/
+/* HAS_POLL:
+ * This symbol, if defined, indicates that the poll routine is
+ * available to poll active file descriptors. Please check I_POLL and
+ * I_SYS_POLL to know which header should be included as well.
+ */
+/*#define HAS_POLL /**/
+
/* HAS_READDIR:
* This symbol, if defined, indicates that the readdir routine is
* available to read directory entries. You may have to include
@@ -408,6 +441,13 @@
*/
/*#define HAS_SETEUID /**/
+/* HAS_SETGROUPS:
+ * This symbol, if defined, indicates that the setgroups() routine is
+ * available to set the list of process groups. If unavailable, multiple
+ * groups are probably not supported.
+ */
+/*#define HAS_SETGROUPS /**/
+
/* HAS_SETLINEBUF:
* This symbol, if defined, indicates that the setlinebuf routine is
* available to change stderr or stdout from block-buffered or unbuffered
@@ -602,6 +642,19 @@
*/
#define HAS_WCTOMB /**/
+/* Groups_t:
+ * This symbol holds the type used for the second argument to
+ * getgroups() and setgroups(). Usually, this is the same as
+ * gidtype (gid_t) , but sometimes it isn't.
+ * It can be int, ushort, gid_t, etc...
+ * It may be necessary to include <sys/types.h> to get any
+ * typedef'ed information. This is only required if you have
+ * getgroups() or setgroups()..
+ */
+#if defined(HAS_GETGROUPS) || defined(HAS_SETGROUPS)
+#define Groups_t gid_t /* Type for 2nd arg to [sg]etgroups() */
+#endif
+
/* I_ARPA_INET:
* This symbol, if defined, indicates to the C program that it should
* include <arpa/inet.h> to get inet_addr and friends declarations.
@@ -733,6 +786,13 @@
*/
/*#define I_SYS_PARAM /**/
+/* I_SYS_POLL:
+ * This symbol, if defined, indicates that the program may include
+ * <sys/poll.h>. When I_POLL is also defined, it's probably safest
+ * to only include <poll.h>.
+ */
+/*#define I_SYS_POLL /**/
+
/* I_SYS_RESOURCE:
* This symbol, if defined, indicates to the C program that it should
* include <sys/resource.h>.
@@ -1047,12 +1107,6 @@
#define const
#endif
-/* HAS_CRYPT:
- * This symbol, if defined, indicates that the crypt routine is available
- * to encrypt passwords and the like.
- */
-/*#define HAS_CRYPT /**/
-
/* HAS_CRYPT_R:
* This symbol, if defined, indicates that the crypt_r routine
* is available to crypt re-entrantly.
@@ -1103,26 +1157,6 @@
/*#define HAS_CTIME_R /**/
#define CTIME_R_PROTO 0 /**/
-/* SETUID_SCRIPTS_ARE_SECURE_NOW:
- * This symbol, if defined, indicates that the bug that prevents
- * setuid scripts from being secure is not present in this kernel.
- */
-/* DOSUID:
- * This symbol, if defined, indicates that the C program should
- * check the script that it is executing for setuid/setgid bits, and
- * attempt to emulate setuid/setgid on systems that have disabled
- * setuid #! scripts because the kernel can't do it securely.
- * It is up to the package designer to make sure that this emulation
- * is done securely. Among other things, it should do an fstat on
- * the script it just opened to make sure it really is a setuid/setgid
- * script, it should make sure the arguments passed correspond exactly
- * to the argument on the #! line, and it should not trust any
- * subprocesses to which it must pass the filename rather than the
- * file descriptor of the script to be executed.
- */
-/*#define SETUID_SCRIPTS_ARE_SECURE_NOW /**/
-/*#define DOSUID /**/
-
/* HAS_DRAND48_R:
* This symbol, if defined, indicates that the drand48_r routine
* is available to drand48 re-entrantly.
@@ -1819,13 +1853,6 @@
*/
/*#define HAS_MSG /**/
-/* HAS_POLL:
- * This symbol, if defined, indicates that the poll routine is
- * available to poll active file descriptors. Please check I_POLL and
- * I_SYS_POLL to know which header should be included as well.
- */
-/*#define HAS_POLL /**/
-
/* OLD_PTHREAD_CREATE_JOINABLE:
* This symbol, if defined, indicates how to create pthread
* in joinable (aka undetached) state. NOTE: not defined
@@ -1925,13 +1952,6 @@
/*#define HAS_SETGRENT_R /**/
#define SETGRENT_R_PROTO 0 /**/
-/* HAS_SETGROUPS:
- * This symbol, if defined, indicates that the setgroups() routine is
- * available to set the list of process groups. If unavailable, multiple
- * groups are probably not supported.
- */
-/*#define HAS_SETGROUPS /**/
-
/* HAS_SETHOSTENT:
* This symbol, if defined, indicates that the sethostent() routine is
* available.
@@ -2331,19 +2351,6 @@
*/
#define Gid_t gid_t /* Type for getgid(), etc... */
-/* Groups_t:
- * This symbol holds the type used for the second argument to
- * getgroups() and setgroups(). Usually, this is the same as
- * gidtype (gid_t) , but sometimes it isn't.
- * It can be int, ushort, gid_t, etc...
- * It may be necessary to include <sys/types.h> to get any
- * typedef'ed information. This is only required if you have
- * getgroups() or setgroups()..
- */
-#if defined(HAS_GETGROUPS) || defined(HAS_SETGROUPS)
-#define Groups_t gid_t /* Type for 2nd arg to [sg]etgroups() */
-#endif
-
/* I_DIRENT:
* This symbol, if defined, indicates to the C program that it should
* include <dirent.h>. Using this symbol also triggers the definition
@@ -2385,7 +2392,19 @@
* This symbol, if defined, indicates that <ndbm.h> exists and should
* be included.
*/
+/* I_GDBMNDBM:
+ * This symbol, if defined, indicates that <gdbm/ndbm.h> exists and should
+ * be included. This was the location of the ndbm.h compatibility file
+ * in RedHat 7.1.
+ */
+/* I_GDBM_NDBM:
+ * This symbol, if defined, indicates that <gdbm-ndbm.h> exists and should
+ * be included. This is the location of the ndbm.h compatibility file
+ * in Debian 4.0.
+ */
/*#define I_NDBM /**/
+/*#define I_GDBMNDBM /**/
+/*#define I_GDBM_NDBM /**/
/* I_NETDB:
* This symbol, if defined, indicates that <netdb.h> exists and
@@ -2725,12 +2744,6 @@
*/
#define Sock_size_t int /**/
-/* STDCHAR:
- * This symbol is defined to be the type of char used in stdio.h.
- * It has the values "unsigned char" or "char".
- */
-#define STDCHAR char /**/
-
/* Uid_t_f:
* This symbol defines the format string used for printing a Uid_t.
*/
@@ -3241,6 +3254,12 @@
*/
/*#define EBCDIC /**/
+/* STDCHAR:
+ * This symbol is defined to be the type of char used in stdio.h.
+ * It has the values "unsigned char" or "char".
+ */
+#define STDCHAR char /**/
+
/* HAS_ATOLF:
* This symbol, if defined, indicates that the atolf routine is
* available to convert strings into long doubles.
@@ -3935,6 +3954,12 @@
*/
#define HAS_TELLDIR_PROTO /**/
+/* HAS_TIMEGM:
+ * This symbol, if defined, indicates that the timegm routine is
+ * available to do the opposite of gmtime ()
+ */
+/*#define HAS_TIMEGM /**/
+
/* U32_ALIGNMENT_REQUIRED:
* This symbol, if defined, indicates that you must access
* character data through U32-aligned pointers.
@@ -4080,6 +4105,12 @@
*/
/*#define I_LIBUTIL /**/
+/* I_MALLOCMALLOC:
+ * This symbol, if defined, indicates to the C program that it should
+ * include <malloc/malloc.h>.
+ */
+/*#define I_MALLOCMALLOC /**/
+
/* I_MNTENT:
* This symbol, if defined, indicates that <mntent.h> exists and
* should be included.
@@ -4410,6 +4441,17 @@
#define STDIO_STREAM_ARRAY
#endif
+/* GMTIME_MAX:
+ * This symbol contains the maximum value for the time_t offset that
+ * the system function gmtime () accepts, and defaults to 0
+ */
+/* GMTIME_MIN:
+ * This symbol contains the minimum value for the time_t offset that
+ * the system function gmtime () accepts, and defaults to 0
+ */
+#define GMTIME_MAX 2147483647 /**/
+#define GMTIME_MIN 0 /**/
+
/* USE_64_BIT_INT:
* This symbol, if defined, indicates that 64-bit integers should
* be used when available. If not defined, the native integers
==== //depot/perl/win32/config_H.vc64#59 (text) ====
Index: perl/win32/config_H.vc64
--- perl/win32/config_H.vc64#58~33350~ 2008-02-22 10:12:36.000000000 -0800
+++ perl/win32/config_H.vc64 2008-07-09 07:02:30.000000000 -0700
@@ -13,7 +13,7 @@
/*
* Package name : perl5
* Source directory :
- * Configuration time: Fri Feb 22 17:17:01 2008
+ * Configuration time: Wed Jul 9 13:18:23 2008
* Configured by : shay
* Target system :
*/
@@ -68,6 +68,12 @@
*/
#define HAS_CHSIZE /**/
+/* HAS_CRYPT:
+ * This symbol, if defined, indicates that the crypt routine is available
+ * to encrypt passwords and the like.
+ */
+/*#define HAS_CRYPT /**/
+
/* HAS_CTERMID:
* This symbol, if defined, indicates that the ctermid routine is
* available to generate filename for terminal.
@@ -101,6 +107,26 @@
*/
#define HAS_DLERROR /**/
+/* SETUID_SCRIPTS_ARE_SECURE_NOW:
+ * This symbol, if defined, indicates that the bug that prevents
+ * setuid scripts from being secure is not present in this kernel.
+ */
+/* DOSUID:
+ * This symbol, if defined, indicates that the C program should
+ * check the script that it is executing for setuid/setgid bits, and
+ * attempt to emulate setuid/setgid on systems that have disabled
+ * setuid #! scripts because the kernel can't do it securely.
+ * It is up to the package designer to make sure that this emulation
+ * is done securely. Among other things, it should do an fstat on
+ * the script it just opened to make sure it really is a setuid/setgid
+ * script, it should make sure the arguments passed correspond exactly
+ * to the argument on the #! line, and it should not trust any
+ * subprocesses to which it must pass the filename rather than the
+ * file descriptor of the script to be executed.
+ */
+/*#define SETUID_SCRIPTS_ARE_SECURE_NOW /**/
+/*#define DOSUID /**/
+
/* HAS_DUP2:
* This symbol, if defined, indicates that the dup2 routine is
* available to duplicate file descriptors.
@@ -344,6 +370,13 @@
*/
#define HAS_PIPE /**/
+/* HAS_POLL:
+ * This symbol, if defined, indicates that the poll routine is
+ * available to poll active file descriptors. Please check I_POLL and
+ * I_SYS_POLL to know which header should be included as well.
+ */
+/*#define HAS_POLL /**/
+
/* HAS_READDIR:
* This symbol, if defined, indicates that the readdir routine is
* available to read directory entries. You may have to include
@@ -408,6 +441,13 @@
*/
/*#define HAS_SETEUID /**/
+/* HAS_SETGROUPS:
+ * This symbol, if defined, indicates that the setgroups() routine is
+ * available to set the list of process groups. If unavailable, multiple
+ * groups are probably not supported.
+ */
+/*#define HAS_SETGROUPS /**/
+
/* HAS_SETLINEBUF:
* This symbol, if defined, indicates that the setlinebuf routine is
* available to change stderr or stdout from block-buffered or unbuffered
@@ -602,6 +642,19 @@
*/
#define HAS_WCTOMB /**/
+/* Groups_t:
+ * This symbol holds the type used for the second argument to
+ * getgroups() and setgroups(). Usually, this is the same as
+ * gidtype (gid_t) , but sometimes it isn't.
+ * It can be int, ushort, gid_t, etc...
+ * It may be necessary to include <sys/types.h> to get any
+ * typedef'ed information. This is only required if you have
+ * getgroups() or setgroups()..
+ */
+#if defined(HAS_GETGROUPS) || defined(HAS_SETGROUPS)
+#define Groups_t gid_t /* Type for 2nd arg to [sg]etgroups() */
+#endif
+
/* I_ARPA_INET:
* This symbol, if defined, indicates to the C program that it should
* include <arpa/inet.h> to get inet_addr and friends declarations.
@@ -733,6 +786,13 @@
*/
/*#define I_SYS_PARAM /**/
+/* I_SYS_POLL:
+ * This symbol, if defined, indicates that the program may include
+ * <sys/poll.h>. When I_POLL is also defined, it's probably safest
+ * to only include <poll.h>.
+ */
+/*#define I_SYS_POLL /**/
+
/* I_SYS_RESOURCE:
* This symbol, if defined, indicates to the C program that it should
* include <sys/resource.h>.
@@ -1036,12 +1096,6 @@
#define const
#endif
-/* HAS_CRYPT:
- * This symbol, if defined, indicates that the crypt routine is available
- * to encrypt passwords and the like.
- */
-/*#define HAS_CRYPT /**/
-
/* HAS_CRYPT_R:
* This symbol, if defined, indicates that the crypt_r routine
* is available to crypt re-entrantly.
@@ -1092,26 +1146,6 @@
/*#define HAS_CTIME_R /**/
#define CTIME_R_PROTO 0 /**/
-/* SETUID_SCRIPTS_ARE_SECURE_NOW:
- * This symbol, if defined, indicates that the bug that prevents
- * setuid scripts from being secure is not present in this kernel.
- */
-/* DOSUID:
- * This symbol, if defined, indicates that the C program should
- * check the script that it is executing for setuid/setgid bits, and
- * attempt to emulate setuid/setgid on systems that have disabled
- * setuid #! scripts because the kernel can't do it securely.
- * It is up to the package designer to make sure that this emulation
- * is done securely. Among other things, it should do an fstat on
- * the script it just opened to make sure it really is a setuid/setgid
- * script, it should make sure the arguments passed correspond exactly
- * to the argument on the #! line, and it should not trust any
- * subprocesses to which it must pass the filename rather than the
- * file descriptor of the script to be executed.
- */
-/*#define SETUID_SCRIPTS_ARE_SECURE_NOW /**/
-/*#define DOSUID /**/
-
/* HAS_DRAND48_R:
* This symbol, if defined, indicates that the drand48_r routine
* is available to drand48 re-entrantly.
@@ -1803,13 +1837,6 @@
*/
/*#define HAS_MSG /**/
-/* HAS_POLL:
- * This symbol, if defined, indicates that the poll routine is
- * available to poll active file descriptors. Please check I_POLL and
- * I_SYS_POLL to know which header should be included as well.
- */
-/*#define HAS_POLL /**/
-
/* OLD_PTHREAD_CREATE_JOINABLE:
* This symbol, if defined, indicates how to create pthread
* in joinable (aka undetached) state. NOTE: not defined
@@ -1909,13 +1936,6 @@
/*#define HAS_SETGRENT_R /**/
#define SETGRENT_R_PROTO 0 /**/
-/* HAS_SETGROUPS:
- * This symbol, if defined, indicates that the setgroups() routine is
- * available to set the list of process groups. If unavailable, multiple
- * groups are probably not supported.
- */
-/*#define HAS_SETGROUPS /**/
-
/* HAS_SETHOSTENT:
* This symbol, if defined, indicates that the sethostent() routine is
* available.
@@ -2315,19 +2335,6 @@
*/
#define Gid_t gid_t /* Type for getgid(), etc... */
-/* Groups_t:
- * This symbol holds the type used for the second argument to
- * getgroups() and setgroups(). Usually, this is the same as
- * gidtype (gid_t) , but sometimes it isn't.
- * It can be int, ushort, gid_t, etc...
- * It may be necessary to include <sys/types.h> to get any
- * typedef'ed information. This is only required if you have
- * getgroups() or setgroups()..
- */
-#if defined(HAS_GETGROUPS) || defined(HAS_SETGROUPS)
-#define Groups_t gid_t /* Type for 2nd arg to [sg]etgroups() */
-#endif
-
/* I_DIRENT:
* This symbol, if defined, indicates to the C program that it should
* include <dirent.h>. Using this symbol also triggers the definition
@@ -2369,7 +2376,19 @@
* This symbol, if defined, indicates that <ndbm.h> exists and should
* be included.
*/
+/* I_GDBMNDBM:
+ * This symbol, if defined, indicates that <gdbm/ndbm.h> exists and should
+ * be included. This was the location of the ndbm.h compatibility file
+ * in RedHat 7.1.
+ */
+/* I_GDBM_NDBM:
+ * This symbol, if defined, indicates that <gdbm-ndbm.h> exists and should
+ * be included. This is the location of the ndbm.h compatibility file
+ * in Debian 4.0.
+ */
/*#define I_NDBM /**/
+/*#define I_GDBMNDBM /**/
+/*#define I_GDBM_NDBM /**/
/* I_NETDB:
* This symbol, if defined, indicates that <netdb.h> exists and
@@ -2709,12 +2728,6 @@
*/
#define Sock_size_t int /**/
-/* STDCHAR:
- * This symbol is defined to be the type of char used in stdio.h.
- * It has the values "unsigned char" or "char".
- */
-#define STDCHAR char /**/
-
/* Uid_t_f:
* This symbol defines the format string used for printing a Uid_t.
*/
@@ -3223,6 +3236,12 @@
*/
/*#define EBCDIC /**/
+/* STDCHAR:
+ * This symbol is defined to be the type of char used in stdio.h.
+ * It has the values "unsigned char" or "char".
+ */
+#define STDCHAR char /**/
+
/* HAS_ATOLF:
* This symbol, if defined, indicates that the atolf routine is
* available to convert strings into long doubles.
@@ -3917,6 +3936,12 @@
*/
#define HAS_TELLDIR_PROTO /**/
+/* HAS_TIMEGM:
+ * This symbol, if defined, indicates that the timegm routine is
+ * available to do the opposite of gmtime ()
+ */
+/*#define HAS_TIMEGM /**/
+
/* U32_ALIGNMENT_REQUIRED:
* This symbol, if defined, indicates that you must access
* character data through U32-aligned pointers.
@@ -4062,6 +4087,12 @@
*/
/*#define I_LIBUTIL /**/
+/* I_MALLOCMALLOC:
+ * This symbol, if defined, indicates to the C program that it should
+ * include <malloc/malloc.h>.
+ */
+/*#define I_MALLOCMALLOC /**/
+
/* I_MNTENT:
* This symbol, if defined, indicates that <mntent.h> exists and
* should be included.
@@ -4387,6 +4418,17 @@
#define STDIO_STREAM_ARRAY
#endif
+/* GMTIME_MAX:
+ * This symbol contains the maximum value for the time_t offset that
+ * the system function gmtime () accepts, and defaults to 0
+ */
+/* GMTIME_MIN:
+ * This symbol contains the minimum value for the time_t offset that
+ * the system function gmtime () accepts, and defaults to 0
+ */
+#define GMTIME_MAX 2147483647 /**/
+#define GMTIME_MIN 0 /**/
+
/* USE_64_BIT_INT:
* This symbol, if defined, indicates that 64-bit integers should
* be used when available. If not defined, the native integers
==== //depot/perl/win32/config_sh.PL#46 (text) ====
Index: perl/win32/config_sh.PL
--- perl/win32/config_sh.PL#45~34075~ 2008-06-20 08:55:48.000000000 -0700
+++ perl/win32/config_sh.PL 2008-07-09 07:02:30.000000000 -0700
@@ -131,6 +131,20 @@
}
}
+# change the sGMTIME_min and sGMTIME_max for VS2005 (aka VC 8) and
+# VS2008 (aka VC 9) or higher (presuming that later versions will have
+# at least the range of that).
+if ($opt{cc} eq 'cl' and $opt{ccversion} =~ /^(\d+)/) {
+ my $ccversion = $1;
+ if ($ccversion == 14) {
+ $opt{sGMTIME_max} = 32535244799;
+ }
+ elsif ($ccversion >= 15) {
+ $opt{sGMTIME_min} = -43200;
+ $opt{sGMTIME_max} = 32535291599;
+ }
+}
+
if ($opt{useithreads} eq 'define' && $opt{ccflags} =~ /-DPERL_IMPLICIT_SYS\b/)
{
$opt{d_pseudofork} = 'define';
}
End of Patch.
