Hello Everyone, I have a question for people familiar with the Hanwell AnoxiBug unit.
I feel like I don't totally understand the calibration instructions as they are written in the manual. If I am understanding the wording in the manual correctly, the AnoxiBug unit I have is not calibrating correctly. However, in a chamber containing Ageless eaters, and that has been flushed with nitrogen, the light on the AnoxiBug does turn green and flashes every 2 seconds. It's a relatively new unit, so I called the person at Hanwell to ask about it. The person on the phone said even though I felt like there may have been issues with calibration, if it's blinking green every 2 seconds that means it's working (I understood that meaning "the unit is designed in a way where there is no way it can blink green every 2 seconds unless everything is OK"). For those of you that use the AnoxiBug unit, do you remember being slightly confused by the way the calibration section in the manual was worded? Maybe my sensor has gone bad, and I will have to track down a place that sells new ones. They are "40XV CiTiceL sensors" by the way- if anyone knows where to get fresh ones, can you let me know? Thanks! Todd -- You received this message because you are subscribed to the Google Groups "Museumpests" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/pestlist/CAMxAh%2Bjk5xMPjd8oc2%2B%2BJoEzKEPuv9BsMvi0%2Bj_Wor%2BZELwu_A%40mail.gmail.com.
