FIRST CALL FOR PAPERS
ECEC'2012
19th Annual European Concurrent Engineering Conference 2012
Bucharest, Romania
April 18-20, 2012
in conjunction with the annual
EUROMEDIA
http://www.eurosis.org/cms/?q=node/1961
FUBUTEC
http://www.eurosis.org/cms/?q=node/1982
conferences
THEMES:
e-Business in CE
Organization and Management
Supporting Technologies
Formal Methods, Techniques and Design
Engineering of Embedded Systems
Engineering data management and information modeling
Engineering process management and simulation
Collaborative CE environments for virtual teams
CE Enhanced Lean Manufacturing
Practical applications and experiences
Factory Planning and Control for SME's
Digital Direct Manufacturing
Patient Centered Health Care with Meaningful Use of IT
Poster Session
Student Session
Tutorials
Exhibition
Organised by
The European Technology Institute
and Sponsored by
EUROSIS
POLITEHNICA University of Bucharest
For latest information see:
www.eurosis.org
or
http://www.eurosis.org/cms/?q=taxonomy/term/312
AIM OF ECEC'2012
The conference aim of the 19th annual European Concurrent Engineering
Conference, ECEC'2012 is to provide European Researchers with a forum,
where they can discuss the latest developments linked to concurrent
engineering focused on European research projects. ECEC'2012 aims to
identify the progress that has been made in Concurrent
Engineering/Lean Manufacturing over the last year. A special focus of
the ECEC'2012 will be the influence of Digital Direct Manufacturing,
also known as additive manufacturing and the new directions in Lean
Manufacturing.
The ECEC helps the dissemination of information and exploitation of
results from the research and technical development and provides a
forum for the exchange of experiences in developing and implementing
CE based solutions across the wide spectrum of manufacturing and
engineering industries. The conference is targeted at industrial
enterprises, industrial associations, universities and research
institutes.
All submissions will be peer reviewed by at least three members of the
International Program Committee. Accepted papers will be published in
the conference Proceedings (both print and electronic format), that
will be copyrighted and widely disseminated. All talks and tutorials,
must be accompanied by a paper of between three to eight Proceedings
pages.
The conference will cover the following tracks:
1 E-Business in CE
1.1 Organizational influences of e-business
1.2 B2B business models for inter-organizational CE
1.3 Migration to e-business based CE
1.4 E-business applications for CE
1.5 B2B portals for CE
1.6 Emerging standards (e.g. XML, UML)
1.7 E-Procurement, E-Supply, E-Engineering, ....
2 Organisation and management
2.1 Principles of CE
2.2 Multi-disciplined team-working and project team organisation
2.3 Global lean product development and international collaboration
2.4 Life-cycle cost and quality
2.5 Business process re-engineering and outsourcing
2.6 Supply chain management
2.7 Measurement of profitability by the introduction of CE
3 Supporting technologies
3.1 Digital mock-up
3.2 Virtual prototyping
3.3 Rapid prototyping
3.4 Synthetic environments and simulation on the factory floor
3.5 Reverse engineering
3.6 Assembly and disassembly
3.7 High precision manufacturing
3.8 Intelligent Manufacturing
3.8 Sensor and robot assisted machining
4.Formal Methods, Techniques and Design
4.1 Quality Function Deployment
4.2 Total Quality Management
4.3 Global Optimization Techniques and Hybrid Approaches
4.4 Lean design, Value Driven Design, Knowledge Driven Design
5.Engineering of Embedded Systems
5.1 HW/SW C-Design
5.2 System Development Process
5.3 Specification Languages
6 Engineering data management and information modeling
6.1 Integration of geometrical data and product definition
6.2 Product data interchange (PDI) and standards
6.3 Data handling, distribution and transformation
6.4 Data version control and management
6.5 Corporate technical memory
6.6 Design rationale and intent
6.7 Concurrent Design Model CDF-IDM
6.8 Open Concurrent Design Server
7 Engineering Process Management and Modelling
7.1 Process planning in continuous, discrete and hybrid processes
7.2 Process modeling, monitoring and control
7.3 Diagnostics and maintenance
7.4 Automated inspection and quality control
7.5 Production planning, scheduling and control
7.6 CE metrics
7.7 CE process planning, scheduling and simulation
7.8 Workflow-management in CE
7.9 Project and team coordination
8 Collaborative CE environments for virtual teams
8.1 Cooperative problem solving
8.2 CSCW methods and tools
8.3 Information and application sharing
8.4 Computer-based video and audio conferencing and consulting
using Smart Boards
8.5 Conflict resolution techniques
8.6 Constraint management
8.7 Negotiation, blackboard and agent-based architecture
8.8 CE-based environments and integrated frameworks
8.9 Architectures for building CE systems
8.10 CE languages and tools
8.11 Distributed computing environments
8.12 WWW based CE systems
8.13 Mobile CE systems
8.14 Networking and Distribution in CE
8.15 Set Based Concurrent Engineering
9 CE Enhanced Lean Manufacturing
9.1 Work Standardization
9.2 5S Workplace Organization
9.3 Visual Controls
9.4 Batch Size Reduction
9.5 Points of Use Storage
9.6 Quality at the Source
9.7 Workflow Practice
9.8 Improved Information and Product Flow
9.9 Cellular Manufacturing
9.10 Pull & Synchronous Scheduling
9.11 Six Sigma & Total Quality
9.12 Rapid Setup
9.13 Work Teams for Cell Management & Process Improvement
9.14 Simplified scheduling and Kanban inventory management (the
Toyota Model)
9.15 Lean PD Assessment Tools
10 Practical applications and experiences
10.1 Practical solutions
10.2 Systematic guide-lines
10.3 Pitfalls and success stories
10.4 Case studies, pilot projects and experiments in aerospace,
shipbuilding etc..
Workshops
The conference organization is open to suggestions on possible
workshops featuring software packages, new hardware or methods used in
concurrent engineering.
If you want to propose a concurrent engineering simulation workshop
please contact; [email protected]
Factory Planning and Control for Small and Medium sized Enterprises (SME?s)
The objective of this special session is to provide a forum of
discussion of new ideas, methods and tools used in Production Planning
and Control (PPC) in for Small and Medium sized Enterprises (SME?s).
In this way, the knowledge and experience in new methods and
approaches can be shared amongst participants.
The characteristics of SMEs present particular challenges to the
implementation of PPC concepts. SMEs often produce a wide variety of
products in low volumes in a Make-To-Order (MTO) or
Engineering-To-Order (ETO) basis, with limited financial resources and
where the adoption of robotics technology has been complex to install,
up to now.
Papers addressing the above issues can be submitted in the following
main themes:
? Concurrent manufacturing control
? Modeling and simulation of SME?S
? Control of machines, robots and factories for manufacturing
? Man-Machine interaction in a Cognitive factory scenario
? Reconfigurable and agile factory planning
? Implementation of Planning and Control systems in SME?s
? Pull-push systems and mechanisms for manufacturing and materials
flow control in SME?s
? Logistics, material-flow and supply chain
? Quality control and management in SME?s
? Agile reconfiguration of manufacturing systems
To submit a paper on this topic use the online form or this link
[email protected]
Direct Digital Manufacturing
There are presently about 25 3D printing technologies. The oldest is
layered object manufacturing, followed by stereolithography. More
recent technologies include selective laser sintering, Direct Metal
Laser Sintering (DMLS), inkjet technologies, fused deposition
modeling, Polyjet matrix and many variations.
All of these technologies take a 3D model, compute cross-sections of
that model, and then deposit the cross-sections sequentially on top of
each other until the final geometry is achieved.
Applications using this technology include direct parts for a variety
of industries including Aerospace, Dental, Medical and other
industries that have small to medium size, highly complex parts and
the Tooling industry to make direct tooling inserts.
As this methodology and technique is used more and more frequently in
the manufacturing process we therefore solicit papers for ECEC'2012 in:
* 3D printing
* Additive manufacturing
* Desktop manufacturing
* Digital fabricator
* Direct metal laser sintering
* Fused deposition modeling
* Instant manufacturing, also known as "direct manufacturing" or
"on-demand manufacturing"
* Rapid manufacturing
* Rapid prototyping
* Selective laser sintering
* Solid freeform fabrication
To submit a paper on this topic use the online form or this link
[email protected]
Patient Centered Health Care with Meaningful Use of IT
Internationally, poor quality and safety in medical care are major
problems having significant economic and societal, as well as health
impacts that require urgent attention. Information Technology(IT) is
increasingly recognized as an important part of the solution. The
concept of Meaningful Use has been introduced to encourage the medical
community to fully explore the potential of IT to transform health
care, incorporating decision support, electronic information exchange
and interoperability. However, the field is still in its infancy and
optimal methods of incorporating IT into complex health care systems
have not been established. A particular challenge is the need to keep
the patient at the center. The medical establishment has begun to
recognise the importance of lessons learned and approaches developed
in the field of engineering. This track provides an opportunity for
cross-fertilization of ideas and approaches to help accelerate
progress in this important domain.
To submit a paper on this topic use the online form or this link
[email protected]
TUTORIALS
Tutorials can be proposed in the following three categories:
T1- Introductory tutorials
T2- State of the Art Tutorials
T3- Software and Modelware Tutorials
Tutorial proposals should be emailed to [email protected]
before DECEMBER 30TH.
POSTER SESSION
The poster session only features work in progress. Next to the
actual poster presentation, these submissions also feature as short
papers in the Proceedings.
STUDENTS SESSION
This session is for students who want to present their work in
progress or part of their doctoral thesis as a paper. Student papers
are denoted by the fact that only the name of the student appears on
the paper as an author. They are published as short papers in the
Proceedings.
DIVERSE ACTIVITIES
For demonstrations or video sessions, please contact EUROSIS.
Special session will be set up for vendor presentations in co-
ordination with the scientific program. User Group meetings for
simulation languages and tools can be organised the day before the
conference. If you would like to arrange a meeting, please contact
the Conference Chairs. We will be happy to provide a meeting room
and other necessary equipment.
Partners for projects session(s) will be organised by EUROSIS to
give potential project teams or individuals the opportunity to
present their research in order to link up with fellow researchers
for future research projects. Those wishing to participate in this
session need to send a proposal to EUROSIS.
A EUROSIS TC Meeting and an EU Project update meeting
EXHIBITION
A special exhibition will be held during the conference focused on
industrial applications. For more information please contact EUROSIS for
further details. Email: [email protected]
DEADLINES AND REQUIREMENTS
Send all submissions in an ELECTRONIC FORM ONLY in (zipped)
Microsoft Word format, or PDF format indicating the
designated track and type of submission (full paper or an extended
abstract) to the EUROSIS ([email protected]).
Please provide your name, affiliation, full mailing address,
telephone / fax number and Email address on all submissions as well.
For submissions please put in the subject of your Email the
following indications: ECEC'2012 and designated track or USE THE
ONLINE SUBMISSION FORM.
http://www.eurosis.org/cms/index.php?q=node/1950
Only original papers, which have not been published elsewhere, will
be accepted for publication
Journal Publication
Only accepted and presented extended papers are eligible for journal
publication in any of the journals listed here.
Quality Control
In order to ensure the quality of the proceedings, Thomson-Reuters ISI
and INSPEC will receive the listing of the actually presented papers,
next to the copies of the Proceedings.
All EUROSIS Proceedings are ISI-Thomson Reuters and INSPEC referenced.
REGISTRATION FEES
Registration Fees
Author
EUROSIS members
Other Participants
Pre-registration before March 20, 2012 ? 495 plus VAT ? 495 plus VAT
? 555 plus VAT
Registration after March 20, 2012 Pre-registration required ? 535
plus VAT ? 595 plus VAT
The full registration fee includes one copy of the Conference
Proceedings, coffee and tea during the breaks, all lunches, a
welcome cocktail and a conference dinner.
SOCIAL PROGRAMME
A visit to a related facility in (or near) Bucharest. More information
to follow.
PAPER SUBMISSION TYPES
FULL PAPER (including abstract, conclusions, diagrams, references)
During review, the submitted full papers can be accepted as a
regular 5 page paper. If excellent, full papers can be accepted by
the program committee as an extended (8-page) paper. Each submission
will be reviewed by at least three members of the ECEC'2012
International Program Committee.
EXTENDED ABSTRACT (at least five pages)
Participants may also submit a 5 page extended abstract for a
regular (5 pages) or short (3 pages) paper or poster, which will be
reviewed by the International Program Committee. All accepted papers
will be published in the ECEC'2012 Conference Proceedings.
SHORT ABSTRACT (at least three to four pages)
Participants may also submit a 3 page abstract for a short paper or
poster, which will be reviewed by the International Program
Committee. All accepted papers will be published in the ECEC'2012
Conference Proceedings.
PLEASE NOTE: ONE (1) PAGE ABSTRACTS ARE NOT ACCEPTED.
CORRESPONDENCE ADDRESS
Philippe Geril
EUROSIS-ETI
European Simulation Office
Greenbridge NV
Wetenschapspark 1
Plassendale 1
B-8400 Ostend Belgium
Tel: +32.59.255330
Fax: +32.59.255339
Email: [email protected]
OUTSTANDING PAPER AWARD
The 2012 ECEC Conference Committee will select the Outstanding Paper
of the Conference. The author of this paper will be awarded a free
registration for a EUROSIS conference. Only papers SUBMITTED AS FULL
papers will be eligible for the Outstanding Paper Award.
LANGUAGE
The official conference language for all papers and presentations is
English
CONFERENCE VENUE
The conference will be held at the Marriott Hotel in Bucharest (under
discussion)
IMPORTANT DEADLINES
EARLY BIRD SUBMISSION DEADLINE: DECEMBER 20TH, 2011
SUBMISSION DEADLINE: JANUARY 20TH, 2012
LATE SUBMISSION DEADLINE: FEBRUARY 5TH, 2012
NOTIFICATION OF ACCEPTANCE OR REJECTION: FEBRUARY 25TH, 2012
Authors provide camera-ready manuscript: MARCH 20TH, 2012
CONFERENCE AT THE MARRIOT HOTEL BUCHAREST: APRIL 18-20, 2012
REPLY CARD
First Name:
Surname:
Occupation and/or Title:
Affiliation:
Mailing Address
Zip code: City: Country.
Telephone: Fax:
E-Mail:
Yes, I intend to attend the ECEC'2012:
[ ] Presenting a paper, by submitting a full paper
[ ] Presenting a short paper (by submitting an extended abstract)
[ ] Participating in the industrial program
[ ] Organizing a vendor session
[ ] Proposing a panel discussion (please mention names of
panellists)
[ ] Contributing to the exhibition
[ ] Without presenting a paper
The provisional title of my paper / exhibited tool is:
With the following highlights:
The paper belongs to the category (please tick only one):
[ ] e-Business in CE
[ ] Organization and Management
[ ] Supporting Technologies
[ ] Formal Methods, Techniques and Design
[ ] Engineering of Embedded Systems
[ ] Engineering data management and information modeling
[ ] Engineering process management and simulation
[ ] Collaborative CE environments for virtual teams
[ ] CE Enhanced Lean Manufacturing
[ ] Practical applications and experiences
[ ] Factory Planning and Control for SME's
[ ] Digital Direct Manufacturing
[ ] Patient Centered Health Care with Meaningful Use of IT
[ ] Poster Session
[ ] Student Session
[ ] Tutorials
[ ] Exhibition
Other colleague(s) interested in the topics of the conference
is/are:
Name:
Address:
Name:
Address:
Please send or fax this card immediately to:
Philippe Geril, EUROSIS-ETI
Greenbridge NV
Wetenschapspark 1
Plassendale 1
B-8400 Ostend Belgium
Tel: +32.59.255330
Fax: +32.59.255339
----
[[ Petri Nets World: ]]
[[ http://www.informatik.uni-hamburg.de/TGI/PetriNets/ ]]
[[ Mailing list FAQ: ]]
[[ http://www.informatik.uni-hamburg.de/TGI/PetriNets/pnml/faq.html ]]
[[ Post messages/summary of replies: ]]
[[ [email protected] ]]
