Hi Barry, I was just the basic version of petsc by downloading petsc-lite-2.3.1.tar.gz, from the petsc web page, do I need to get the developer version to make this work?
Laslo On Wed, 28 Jun 2006, Barry Smith wrote: > > ls python > you will see a directory called BuildSystem. > If you are using hg to get PETSc then do > cd python/BuildSystem > hg pull > if you are using bk to get PETSc you will need to switch to > hg see http://www-unix.mcs.anl.gov/petsc/petsc-as/developers/index.html > > Good luck, > > Barry > > > On Wed, 28 Jun 2006, Laslo Tibor Diosady wrote: > >> Hi Barry, >> >> Could you clarify what you mean by update BuildSystem? >> >> Thanks, >> >> Laslo >> >> On Wed, 28 Jun 2006, Barry Smith wrote: >> >>> >>> You may need to update BuildSystem if you have not in a long time. >>> >>> Barry >>> >>> On Wed, 28 Jun 2006, Laslo Tibor Diosady wrote: >>> >>>> I get the following error when trying to run configure >>>> >>>> ********************************************************************************* >>>> UNABLE to FIND MODULE for config/configure.py >>>> >>>> >>>> >>>> --------------------------------------------------------------------------------------- >>>> No module named packages.MPI >>>> ********************************************************************************* >>>> >>>> I used the command, and both PETSC_DIR and PETSC_ARCH have been set >>>> >>>> ./config/configure.py --download-parmetis=1 --download-mpich=1 >>>> --download-f-blas-lapack=1 --with-shared --with-dynamic >>>> >>>> I believe this exact same command worked last time I tried to configure >>>> petsc so I'm not sure why it would not work this time, >>>> >>>> Any help would be greatly appreciated, >>>> >>>> Thanks, >>>> >>>> Laslo >>>> >>>> >>> >>> >> >> > >
