Sorry. I should reply it to the lists. [hzh225@dlxlogin2-2 petsc-3.5.2]$ make PETSC_DIR=/home/hzh225/LIB_CFD/nP/petsc-3.5.2 PETSC_ARCH=linux-gnu-intel test
Running test examples to verify correct installation Using PETSC_DIR=/home/hzh225/LIB_CFD/nP/petsc-3.5.2 and PETSC_ARCH=linux-gnu-intel C/C++ example src/snes/examples/tutorials/ex19 run successfully with 1 MPI process C/C++ example src/snes/examples/tutorials/ex19 run successfully with 2 MPI processes Fortran example src/snes/examples/tutorials/ex5f run successfully with 1 MPI process Completed test examples ========================================= Now to evaluate the computer systems you plan use - do: make PETSC_DIR=/home/hzh225/LIB_CFD/nP/petsc-3.5.2 PETSC_ARCH=linux-gnu-intel streams NPMAX=<number of MPI processes you intend to use> Huaibao (Paul) Zhang *Gas Surface Interactions Lab* Department of Mechanical Engineering University of Kentucky, Lexington, KY, 40506-0503 *Office*: 216 Ralph G. Anderson Building *Web*:gsil.engineering.uky.edu On Mon, Dec 1, 2014 at 4:18 PM, Jed Brown <[email protected]> wrote: > paul zhang <[email protected]> writes: > > > Hi Jed, > > Does this mean I've passed the default test? > > It's an MPI test. Run this to see if PETSc solvers are running correctly: > > make PETSC_DIR=/home/hzh225/LIB_CFD/nP/petsc-3.5.2 > PETSC_ARCH=linux-gnu-intel test > > > Is the "open matplotlib " an issue? > > No, it's just a Python library that would be used to create a nice > figure if you had it installed. >
