> On Aug 22, 2015, at 4:16 PM, Gideon Simpson <[email protected]> wrote: > > Thanks Barry, I’ll take a look at debugging. I’m also going to try petsc > 3.6, since that has a newer MUMPS build. > > Regarding the SuperLU bugs, are they bad enough hat I should distrust output > even when errors were not generated?
In my experience and what I've see no. It either crashes or runs correctly. But you can always check the residual after the solution > > > -gideon > >> On Aug 22, 2015, at 5:12 PM, Barry Smith <[email protected]> wrote: >> >> >>> On Aug 22, 2015, at 4:04 PM, Gideon Simpson <[email protected]> >>> wrote: >>> >>> I’m having issues with both SuperLU dist and MUMPS, as compiled by PETsc, >>> in the following sense: >>> >>> 1. For large enough systems, which seems to vary depending on which >>> computer I’m on, MUMPS seems to just die and never start, when it’s used as >>> the linear solver within a SNES. There’s no error message, it just sits >>> there and doesn’t do anything. >> >> You will need to use a debugger to figure out where it is "hanging"; we >> haven't heard reports about this. >>> >>> 2. When running with SuperLU dist, I got the following error, with no >>> further information: >> >> The last release of SuperLU_DIST had some pretty nasty bugs, memory >> corruption that caused crashes etc. We think they are now fixed if you use >> the maint branch of the PETSc repository and --download-superlu_dist If you >> stick with the PETSc release and SuperLU_Dist you are using you will keep >> seeing these crashes >> >> Barry >> >> >>> >>> [3]PETSC ERROR: >>> ------------------------------------------------------------------------ >>> [3]PETSC ERROR: Caught signal number 11 SEGV: Segmentation Violation, >>> probably memory access out of range >>> [3]PETSC ERROR: Try option -start_in_debugger or -on_error_attach_debugger >>> [3]PETSC ERROR: or see >>> http://www.mcs.anl.gov/petsc/documentation/faq.html#valgrind >>> [3]PETSC ERROR: or try http://valgrind.org on GNU/linux and Apple Mac OS X >>> to find memory corruption errors >>> [3]PETSC ERROR: likely location of problem given in stack below >>> [3]PETSC ERROR: --------------------- Stack Frames >>> ------------------------------------ >>> [3]PETSC ERROR: Note: The EXACT line numbers in the stack are not available, >>> [3]PETSC ERROR: INSTEAD the line number of the start of the function >>> [3]PETSC ERROR: is given. >>> [3]PETSC ERROR: [3] SuperLU_DIST:pdgssvx line 161 >>> /home/simpson/software/petsc-3.5.4/src/mat/impls/aij/mpi/superlu_dist/superlu_dist.c >>> [3]PETSC ERROR: [3] MatSolve_SuperLU_DIST line 121 >>> /home/simpson/software/petsc-3.5.4/src/mat/impls/aij/mpi/superlu_dist/superlu_dist.c >>> [3]PETSC ERROR: [3] MatSolve line 3104 >>> /home/simpson/software/petsc-3.5.4/src/mat/interface/matrix.c >>> [3]PETSC ERROR: [3] PCApply_LU line 194 >>> /home/simpson/software/petsc-3.5.4/src/ksp/pc/impls/factor/lu/lu.c >>> [3]PETSC ERROR: [3] KSP_PCApplyBAorAB line 258 >>> /home/simpson/software/petsc-3.5.4/include/petsc-private/kspimpl.h >>> [3]PETSC ERROR: --------------------- Error Message >>> -------------------------------------------------------------- >>> [3]PETSC ERROR: Signal received >>> [3]PETSC ERROR: See http://www.mcs.anl.gov/petsc/documentation/faq.html for >>> trouble shooting. >>> [3]PETSC ERROR: Petsc Release Version 3.5.4, May, 23, 2015 >>> [3]PETSC ERROR: ./blowup_batch2 on a arch-linux2-c-debug named proteusi01 >>> by simpson Sat Aug 22 17:01:41 2015 >>> [3]PETSC ERROR: Configure options >>> --with-mpi-dir=/mnt/HA/opt/openmpi/intel/64/1.8.1-mlnx-ofed >>> --with-blas-lib=/mnt/HA/opt/blas/gcc/64/20110419/libblas.a >>> --with-lapack-lib=/liblapack.a --download-suitesparse=yes >>> --download-superlu=yes --download-superlu_dist=yes --download-mumps=yes >>> --download-metis=yes --download-parmetis=yes --download-scalapack=yes >>> [3]PETSC ERROR: #1 User provided function() line 0 in unknown file >>> -------------------------------------------------------------------------- >>> MPI_ABORT was invoked on rank 3 in communicator MPI_COMM_WORLD >>> with errorcode 59. >>> >>> NOTE: invoking MPI_ABORT causes Open MPI to kill all MPI processes. >>> You may or may not see output from other processes, depending on >>> exactly when Open MPI kills them. >>> -------------------------------------------------------------------------- >>> [proteusi01:14037] 1 more process has sent help message help-mpi-api.txt / >>> mpi-abort >>> [proteusi01:14037] Set MCA parameter "orte_base_help_aggregate" to 0 to see >>> all help / error messages >>> [6]PETSC ERROR: >>> ------------------------------------------------------------------------ >>> [6]PETSC ERROR: Caught signal number 15 Terminate: Some process (or the >>> batch system) has told this process to end >>> [6]PETSC ERROR: Try option -start_in_debugger or -on_error_attach_debugger >>> [6]PETSC ERROR: or see >>> http://www.mcs.anl.gov/petsc/documentation/faq.html#valgrind >>> [6]PETSC ERROR: or try http://valgrind.org on GNU/linux and Apple Mac OS X >>> to find memory corruption errors >>> [6]PETSC ERROR: likely location of problem given in stack below >>> [6]PETSC ERROR: --------------------- Stack Frames >>> ------------------------------------ >>> [6]PETSC ERROR: Note: The EXACT line numbers in the stack are not available, >>> [6]PETSC ERROR: INSTEAD the line number of the start of the function >>> [6]PETSC ERROR: is given. >>> [6]PETSC ERROR: [6] SuperLU_DIST:pdgssvx line 161 >>> /home/simpson/software/petsc-3.5.4/src/mat/impls/aij/mpi/superlu_dist/superlu_dist.c >>> [6]PETSC ERROR: [6] MatSolve_SuperLU_DIST line 121 >>> /home/simpson/software/petsc-3.5.4/src/mat/impls/aij/mpi/superlu_dist/superlu_dist.c >>> [6]PETSC ERROR: [6] MatSolve line 3104 >>> /home/simpson/software/petsc-3.5.4/src/mat/interface/matrix.c >>> [6]PETSC ERROR: [6] PCApply_LU line 194 >>> /home/simpson/software/petsc-3.5.4/src/ksp/pc/impls/factor/lu/lu.c >>> [6]PETSC ERROR: [6] KSP_PCApplyBAorAB line 258 >>> /home/simpson/software/petsc-3.5.4/include/petsc-private/kspimpl.h >>> [6]PETSC ERROR: --------------------- Error Message >>> -------------------------------------------------------------- >>> [6]PETSC ERROR: Signal received >>> [6]PETSC ERROR: See http://www.mcs.anl.gov/petsc/documentation/faq.html for >>> trouble shooting. >>> [6]PETSC ERROR: Petsc Release Version 3.5.4, May, 23, 2015 >>> [6]PETSC ERROR: ./blowup_batch2 on a arch-linux2-c-debug named proteusi01 >>> by simpson Sat Aug 22 17:01:41 2015 >>> [6]PETSC ERROR: Configure options >>> --with-mpi-dir=/mnt/HA/opt/openmpi/intel/64/1.8.1-mlnx-ofed >>> --with-blas-lib=/mnt/HA/opt/blas/gcc/64/20110419/libblas.a >>> --with-lapack-lib=/liblapack.a --download-suitesparse=yes >>> --download-superlu=yes --download-superlu_dist=yes --download-mumps=yes >>> --download-metis=yes --download-parmetis=yes --download-scalapack=yes >>> [6]PETSC ERROR: #1 User provided function() line 0 in unknown file >>> [7]PETSC ERROR: >>> ------------------------------------------------------------------------ >>> [7]PETSC ERROR: Caught signal number 15 Terminate: Some process (or the >>> batch system) has told this process to end >>> [7]PETSC ERROR: Try option -start_in_debugger or -on_error_attach_debugger >>> [7]PETSC ERROR: or see >>> http://www.mcs.anl.gov/petsc/documentation/faq.html#valgrind >>> [7]PETSC ERROR: or try http://valgrind.org on GNU/linux and Apple Mac OS X >>> to find memory corruption errors >>> [7]PETSC ERROR: likely location of problem given in stack below >>> [7]PETSC ERROR: --------------------- Stack Frames >>> ------------------------------------ >>> [7]PETSC ERROR: Note: The EXACT line numbers in the stack are not available, >>> [7]PETSC ERROR: INSTEAD the line number of the start of the function >>> [7]PETSC ERROR: is given. >>> [7]PETSC ERROR: [7] SuperLU_DIST:pdgssvx line 161 >>> /home/simpson/software/petsc-3.5.4/src/mat/impls/aij/mpi/superlu_dist/superlu_dist.c >>> [7]PETSC ERROR: [7] MatSolve_SuperLU_DIST line 121 >>> /home/simpson/software/petsc-3.5.4/src/mat/impls/aij/mpi/superlu_dist/superlu_dist.c >>> [7]PETSC ERROR: [7] MatSolve line 3104 >>> /home/simpson/software/petsc-3.5.4/src/mat/interface/matrix.c >>> [7]PETSC ERROR: [7] PCApply_LU line 194 >>> /home/simpson/software/petsc-3.5.4/src/ksp/pc/impls/factor/lu/lu.c >>> [7]PETSC ERROR: [7] KSP_PCApplyBAorAB line 258 >>> /home/simpson/software/petsc-3.5.4/include/petsc-private/kspimpl.h >>> [7]PETSC ERROR: --------------------- Error Message >>> -------------------------------------------------------------- >>> [7]PETSC ERROR: Signal received >>> [7]PETSC ERROR: See http://www.mcs.anl.gov/petsc/documentation/faq.html for >>> trouble shooting. >>> [7]PETSC ERROR: Petsc Release Version 3.5.4, May, 23, 2015 >>> [7]PETSC ERROR: ./blowup_batch2 on a arch-linux2-c-debug named proteusi01 >>> by simpson Sat Aug 22 17:01:41 2015 >>> [7]PETSC ERROR: Configure options >>> --with-mpi-dir=/mnt/HA/opt/openmpi/intel/64/1.8.1-mlnx-ofed >>> --with-blas-lib=/mnt/HA/opt/blas/gcc/64/20110419/libblas.a >>> --with-lapack-lib=/liblapack.a --download-suitesparse=yes >>> --download-superlu=yes --download-superlu_dist=yes --download-mumps=yes >>> --download-metis=yes --download-parmetis=yes --download-scalapack=yes >>> [7]PETSC ERROR: #1 User provided function() line 0 in unknown file >>> [0]PETSC ERROR: >>> ------------------------------------------------------------------------ >>> [0]PETSC ERROR: Caught signal number 15 Terminate: Some process (or the >>> batch system) has told this process to end >>> [0]PETSC ERROR: Try option -start_in_debugger or -on_error_attach_debugger >>> [0]PETSC ERROR: or see >>> http://www.mcs.anl.gov/petsc/documentation/faq.html#valgrind >>> [0]PETSC ERROR: or try http://valgrind.org on GNU/linux and Apple Mac OS X >>> to find memory corruption errors >>> [0]PETSC ERROR: likely location of problem given in stack below >>> [0]PETSC ERROR: --------------------- Stack Frames >>> ------------------------------------ >>> [0]PETSC ERROR: Note: The EXACT line numbers in the stack are not available, >>> [0]PETSC ERROR: INSTEAD the line number of the start of the function >>> [0]PETSC ERROR: is given. >>> [0]PETSC ERROR: [0] SuperLU_DIST:pdgssvx line 161 >>> /home/simpson/software/petsc-3.5.4/src/mat/impls/aij/mpi/superlu_dist/superlu_dist.c >>> [0]PETSC ERROR: [0] MatSolve_SuperLU_DIST line 121 >>> /home/simpson/software/petsc-3.5.4/src/mat/impls/aij/mpi/superlu_dist/superlu_dist.c >>> [0]PETSC ERROR: [0] MatSolve line 3104 >>> /home/simpson/software/petsc-3.5.4/src/mat/interface/matrix.c >>> [0]PETSC ERROR: [0] PCApply_LU line 194 >>> /home/simpson/software/petsc-3.5.4/src/ksp/pc/impls/factor/lu/lu.c >>> [0]PETSC ERROR: [0] KSP_PCApplyBAorAB line 258 >>> /home/simpson/software/petsc-3.5.4/include/petsc-private/kspimpl.h >>> [0]PETSC ERROR: --------------------- Error Message >>> -------------------------------------------------------------- >>> [0]PETSC ERROR: Signal received >>> [0]PETSC ERROR: See http://www.mcs.anl.gov/petsc/documentation/faq.html for >>> trouble shooting. >>> [0]PETSC ERROR: Petsc Release Version 3.5.4, May, 23, 2015 >>> [0]PETSC ERROR: ./blowup_batch2 on a arch-linux2-c-debug named proteusi01 >>> by simpson Sat Aug 22 17:01:41 2015 >>> [0]PETSC ERROR: Configure options >>> --with-mpi-dir=/mnt/HA/opt/openmpi/intel/64/1.8.1-mlnx-ofed >>> --with-blas-lib=/mnt/HA/opt/blas/gcc/64/20110419/libblas.a >>> --with-lapack-lib=/liblapack.a --download-suitesparse=yes >>> --download-superlu=yes --download-superlu_dist=yes --download-mumps=yes >>> --download-metis=yes --download-parmetis=yes --download-scalapack=yes >>> [0]PETSC ERROR: #1 User provided function() line 0 in unknown file >>> [1]PETSC ERROR: >>> ------------------------------------------------------------------------ >>> [1]PETSC ERROR: Caught signal number 15 Terminate: Some process (or the >>> batch system) has told this process to end >>> [1]PETSC ERROR: Try option -start_in_debugger or -on_error_attach_debugger >>> [1]PETSC ERROR: or see >>> http://www.mcs.anl.gov/petsc/documentation/faq.html#valgrind >>> [1]PETSC ERROR: or try http://valgrind.org on GNU/linux and Apple Mac OS X >>> to find memory corruption errors >>> [1]PETSC ERROR: likely location of problem given in stack below >>> [1]PETSC ERROR: --------------------- Stack Frames >>> ------------------------------------ >>> [1]PETSC ERROR: Note: The EXACT line numbers in the stack are not available, >>> [1]PETSC ERROR: INSTEAD the line number of the start of the function >>> [1]PETSC ERROR: is given. >>> [1]PETSC ERROR: [1] SuperLU_DIST:pdgssvx line 161 >>> /home/simpson/software/petsc-3.5.4/src/mat/impls/aij/mpi/superlu_dist/superlu_dist.c >>> [1]PETSC ERROR: [1] MatSolve_SuperLU_DIST line 121 >>> /home/simpson/software/petsc-3.5.4/src/mat/impls/aij/mpi/superlu_dist/superlu_dist.c >>> [1]PETSC ERROR: [1] MatSolve line 3104 >>> /home/simpson/software/petsc-3.5.4/src/mat/interface/matrix.c >>> [1]PETSC ERROR: [1] PCApply_LU line 194 >>> /home/simpson/software/petsc-3.5.4/src/ksp/pc/impls/factor/lu/lu.c >>> [1]PETSC ERROR: [1] KSP_PCApplyBAorAB line 258 >>> /home/simpson/software/petsc-3.5.4/include/petsc-private/kspimpl.h >>> [1]PETSC ERROR: --------------------- Error Message >>> -------------------------------------------------------------- >>> [1]PETSC ERROR: Signal received >>> [1]PETSC ERROR: See http://www.mcs.anl.gov/petsc/documentation/faq.html for >>> trouble shooting. >>> [1]PETSC ERROR: Petsc Release Version 3.5.4, May, 23, 2015 >>> [1]PETSC ERROR: ./blowup_batch2 on a arch-linux2-c-debug named proteusi01 >>> by simpson Sat Aug 22 17:01:41 2015 >>> [1]PETSC ERROR: Configure options >>> --with-mpi-dir=/mnt/HA/opt/openmpi/intel/64/1.8.1-mlnx-ofed >>> --with-blas-lib=/mnt/HA/opt/blas/gcc/64/20110419/libblas.a >>> --with-lapack-lib=/liblapack.a --download-suitesparse=yes >>> --download-superlu=yes --download-superlu_dist=yes --download-mumps=yes >>> --download-metis=yes --download-parmetis=yes --download-scalapack=yes >>> [1]PETSC ERROR: #1 User provided function() line 0 in unknown file >>> [2]PETSC ERROR: >>> ------------------------------------------------------------------------ >>> [2]PETSC ERROR: Caught signal number 15 Terminate: Some process (or the >>> batch system) has told this process to end >>> [2]PETSC ERROR: Try option -start_in_debugger or -on_error_attach_debugger >>> [2]PETSC ERROR: or see >>> http://www.mcs.anl.gov/petsc/documentation/faq.html#valgrind >>> [2]PETSC ERROR: or try http://valgrind.org on GNU/linux and Apple Mac OS X >>> to find memory corruption errors >>> [2]PETSC ERROR: likely location of problem given in stack below >>> [2]PETSC ERROR: --------------------- Stack Frames >>> ------------------------------------ >>> [2]PETSC ERROR: Note: The EXACT line numbers in the stack are not available, >>> [2]PETSC ERROR: INSTEAD the line number of the start of the function >>> [2]PETSC ERROR: is given. >>> [2]PETSC ERROR: [2] SuperLU_DIST:pdgssvx line 161 >>> /home/simpson/software/petsc-3.5.4/src/mat/impls/aij/mpi/superlu_dist/superlu_dist.c >>> [2]PETSC ERROR: [2] MatSolve_SuperLU_DIST line 121 >>> /home/simpson/software/petsc-3.5.4/src/mat/impls/aij/mpi/superlu_dist/superlu_dist.c >>> [2]PETSC ERROR: [2] MatSolve line 3104 >>> /home/simpson/software/petsc-3.5.4/src/mat/interface/matrix.c >>> [2]PETSC ERROR: [2] PCApply_LU line 194 >>> /home/simpson/software/petsc-3.5.4/src/ksp/pc/impls/factor/lu/lu.c >>> [2]PETSC ERROR: [2] KSP_PCApplyBAorAB line 258 >>> /home/simpson/software/petsc-3.5.4/include/petsc-private/kspimpl.h >>> [2]PETSC ERROR: --------------------- Error Message >>> -------------------------------------------------------------- >>> [2]PETSC ERROR: Signal received >>> [2]PETSC ERROR: See http://www.mcs.anl.gov/petsc/documentation/faq.html for >>> trouble shooting. >>> [2]PETSC ERROR: Petsc Release Version 3.5.4, May, 23, 2015 >>> [2]PETSC ERROR: ./blowup_batch2 on a arch-linux2-c-debug named proteusi01 >>> by simpson Sat Aug 22 17:01:41 2015 >>> [2]PETSC ERROR: Configure options >>> --with-mpi-dir=/mnt/HA/opt/openmpi/intel/64/1.8.1-mlnx-ofed >>> --with-blas-lib=/mnt/HA/opt/blas/gcc/64/20110419/libblas.a >>> --with-lapack-lib=/liblapack.a --download-suitesparse=yes >>> --download-superlu=yes --download-superlu_dist=yes --download-mumps=yes >>> --download-metis=yes --download-parmetis=yes --download-scalapack=yes >>> [2]PETSC ERROR: #1 User provided function() line 0 in unknown file >>> [4]PETSC ERROR: >>> ------------------------------------------------------------------------ >>> [4]PETSC ERROR: Caught signal number 15 Terminate: Some process (or the >>> batch system) has told this process to end >>> [4]PETSC ERROR: Try option -start_in_debugger or -on_error_attach_debugger >>> [4]PETSC ERROR: or see >>> http://www.mcs.anl.gov/petsc/documentation/faq.html#valgrind >>> [4]PETSC ERROR: or try http://valgrind.org on GNU/linux and Apple Mac OS X >>> to find memory corruption errors >>> [4]PETSC ERROR: likely location of problem given in stack below >>> [4]PETSC ERROR: --------------------- Stack Frames >>> ------------------------------------ >>> [4]PETSC ERROR: Note: The EXACT line numbers in the stack are not available, >>> [4]PETSC ERROR: INSTEAD the line number of the start of the function >>> [4]PETSC ERROR: is given. >>> [4]PETSC ERROR: [4] SuperLU_DIST:pdgssvx line 161 >>> /home/simpson/software/petsc-3.5.4/src/mat/impls/aij/mpi/superlu_dist/superlu_dist.c >>> [4]PETSC ERROR: [4] MatSolve_SuperLU_DIST line 121 >>> /home/simpson/software/petsc-3.5.4/src/mat/impls/aij/mpi/superlu_dist/superlu_dist.c >>> [4]PETSC ERROR: [4] MatSolve line 3104 >>> /home/simpson/software/petsc-3.5.4/src/mat/interface/matrix.c >>> [4]PETSC ERROR: [4] PCApply_LU line 194 >>> /home/simpson/software/petsc-3.5.4/src/ksp/pc/impls/factor/lu/lu.c >>> [4]PETSC ERROR: [4] KSP_PCApplyBAorAB line 258 >>> /home/simpson/software/petsc-3.5.4/include/petsc-private/kspimpl.h >>> [4]PETSC ERROR: --------------------- Error Message >>> -------------------------------------------------------------- >>> [4]PETSC ERROR: Signal received >>> [4]PETSC ERROR: See http://www.mcs.anl.gov/petsc/documentation/faq.html for >>> trouble shooting. >>> [4]PETSC ERROR: Petsc Release Version 3.5.4, May, 23, 2015 >>> [4]PETSC ERROR: ./blowup_batch2 on a arch-linux2-c-debug named proteusi01 >>> by simpson Sat Aug 22 17:01:41 2015 >>> [4]PETSC ERROR: Configure options >>> --with-mpi-dir=/mnt/HA/opt/openmpi/intel/64/1.8.1-mlnx-ofed >>> --with-blas-lib=/mnt/HA/opt/blas/gcc/64/20110419/libblas.a >>> --with-lapack-lib=/liblapack.a --download-suitesparse=yes >>> --download-superlu=yes --download-superlu_dist=yes --download-mumps=yes >>> --download-metis=yes --download-parmetis=yes --download-scalapack=yes >>> [4]PETSC ERROR: #1 User provided function() line 0 in unknown file >>> [5]PETSC ERROR: >>> ------------------------------------------------------------------------ >>> [5]PETSC ERROR: Caught signal number 15 Terminate: Some process (or the >>> batch system) has told this process to end >>> [5]PETSC ERROR: Try option -start_in_debugger or -on_error_attach_debugger >>> [5]PETSC ERROR: or see >>> http://www.mcs.anl.gov/petsc/documentation/faq.html#valgrind >>> [5]PETSC ERROR: or try http://valgrind.org on GNU/linux and Apple Mac OS X >>> to find memory corruption errors >>> [5]PETSC ERROR: likely location of problem given in stack below >>> [5]PETSC ERROR: --------------------- Stack Frames >>> ------------------------------------ >>> [5]PETSC ERROR: Note: The EXACT line numbers in the stack are not available, >>> [5]PETSC ERROR: INSTEAD the line number of the start of the function >>> [5]PETSC ERROR: is given. >>> [5]PETSC ERROR: [5] SuperLU_DIST:pdgssvx line 161 >>> /home/simpson/software/petsc-3.5.4/src/mat/impls/aij/mpi/superlu_dist/superlu_dist.c >>> [5]PETSC ERROR: [5] MatSolve_SuperLU_DIST line 121 >>> /home/simpson/software/petsc-3.5.4/src/mat/impls/aij/mpi/superlu_dist/superlu_dist.c >>> [5]PETSC ERROR: [5] MatSolve line 3104 >>> /home/simpson/software/petsc-3.5.4/src/mat/interface/matrix.c >>> [5]PETSC ERROR: [5] PCApply_LU line 194 >>> /home/simpson/software/petsc-3.5.4/src/ksp/pc/impls/factor/lu/lu.c >>> [5]PETSC ERROR: [5] KSP_PCApplyBAorAB line 258 >>> /home/simpson/software/petsc-3.5.4/include/petsc-private/kspimpl.h >>> [5]PETSC ERROR: --------------------- Error Message >>> -------------------------------------------------------------- >>> [5]PETSC ERROR: Signal received >>> [5]PETSC ERROR: See http://www.mcs.anl.gov/petsc/documentation/faq.html for >>> trouble shooting. >>> [5]PETSC ERROR: Petsc Release Version 3.5.4, May, 23, 2015 >>> [5]PETSC ERROR: ./blowup_batch2 on a arch-linux2-c-debug named proteusi01 >>> by simpson Sat Aug 22 17:01:41 2015 >>> [5]PETSC ERROR: Configure options >>> --with-mpi-dir=/mnt/HA/opt/openmpi/intel/64/1.8.1-mlnx-ofed >>> --with-blas-lib=/mnt/HA/opt/blas/gcc/64/20110419/libblas.a >>> --with-lapack-lib=/liblapack.a --download-suitesparse=yes >>> --download-superlu=yes --download-superlu_dist=yes --download-mumps=yes >>> --download-metis=yes --download-parmetis=yes --download-scalapack=yes >>> [5]PETSC ERROR: #1 User provided function() line 0 in unknown file >>> >>> -gideon >>> >>> >> >
