Add option '-ksp_error_if_not_converged'. I suspect the matrix has zero pivot. Hong
On Wed, Jul 12, 2017 at 12:45 PM, Jose E. Roman <[email protected]> wrote: > > > El 12 jul 2017, a las 18:56, Pandey, Siddhant <[email protected]> > escribió: > > > > We recently updated our installation of PETSC and SLEPC from an older > version, and eigenvalue problems converging in the previous installation is > not converging anymore (diagonalization never comes to an end). On using > -info, the following message keeps repeating during diagonalization: > > > > [0] PCSetUp(): Leaving PC with identical preconditioner since operator > is unchanged > > [0] STMatSolve(): Linear solve iterations=1 > > [0] PCSetUp(): Leaving PC with identical preconditioner since operator > is unchanged > > [0] STMatSolve(): Linear solve iterations=1 > > [0] BV_SafeSqrt(): Zero norm, either the vector is zero or a semi-inner > product is being used > > [0] PCSetUp(): Leaving PC with identical preconditioner since operator > is unchanged > > [0] STMatSolve(): Linear solve iterations=1 > > [0] PCSetUp(): Leaving PC with identical preconditioner since operator > is unchanged > > [0] STMatSolve(): Linear solve iterations=1 > > > > As can be seen, iteration number remains 1. The issue gets resolved with > a smaller sized matrix. Currently I am using a 10648 x 10648 matrix, and > PETSC is configured for complex values. > > > > What changes do I have to make to make my codes work in the new > installation? This seems to be a version specific issue. > > > > > > Thanks, > > Sidd > > WPI > > I don't understand why are you getting the BV message. Maybe your B-matrix > is singular, but it is not sufficient to explain this. If possible, send me > your matrices and I will try to reproduce the problem (I would also need to > know all the settings, which can be displayed with -eps_view or > -eps_view_pre). > > Jose > >
