Likely the libraries are in /cygdrive/c/PROGRA~2/INTELS~1/COMPIL~1.279/windows/mkl/lib/intel64 and not /cygdrive/c/PROGRA~2/INTELS~1/COMPIL~1.279/windows/mkl/lib
Please verify: ls /cygdrive/c/PROGRA~2/INTELS~1/COMPIL~1.279/windows/mkl/lib/intel64 Then you would need: --with-blas-lapack-lib="-L/cygdrive/c/PROGRA~2/INTELS~1/COMPIL~1.279/windows/mkl/lib/intel64 mkl_intel_lp64.lib mkl_core.lib mkl_intel_thread.lib libiomp5md.lib" Satish On Tue, 29 Sep 2020, Thuc Bui wrote: > Hi Barry & Satish, > > I really appreciate you are getting back to me. Because libiomp5md.lib is > not in the mkl/lib directory, I just copy it to the same directory and per > your suggestion use the followings > > ./configure --with-cc='win32fe cl' --with-cxx='win32fe cl' --with-fc=0 > --with-openmp --with-debugging=0 --with-mpi=0 > --with-blas-lapack-lib="-L/cygdrive/c/PROGRA~2/INTELS~1/COMPIL~1.279/windows > /mkl/lib mkl_intel_lp64.lib mkl_core.lib mkl_intel_thread.lib > libiomp5md.lib" > > Unfortunately, I got the same error message as below. I am attaching > configure log, and hopefully you can see what I am doing icorrectly. > > Many thanks, > Thuc > > ---------------------------------------------------------------------------- > --- > You set a value for --with-blaslapack-lib=<lib>, but > ['-L/cygdrive/c/PROGRA~2/INTELS~1/COMPIL~1.279/windows/mkl/lib', > 'mkl_intel_lp64.lib', 'mkl_core.lib', 'mkl_intel_thread.lib', > 'libiomp5md.lib'] cannot be used > **************************************************************************** > *** > > -----Original Message----- > From: Satish Balay [mailto:[email protected]] > Sent: Tuesday, September 29, 2020 4:12 PM > To: Thuc Bui > Cc: [email protected] > Subject: Re: [petsc-users] Failed to build Petsc statically linked to MKL > for Windows > > https://software.intel.com/content/www/us/en/develop/articles/intel-mkl-link > -line-advisor.html > > Checking for MS compilers - [MKL2018+] it gives: > > mkl_intel_lp64.lib mkl_intel_thread.lib mkl_core.lib libiomp5md.lib > > i.e no -Wl,--start-group [MS compiler most likely does not use this option] > > So you can try: > > --with-blaslapack-lib="-L/cygdrive/c/PROGRA~2/INTELS~1/COMPIL~1.279/windows/ > mkl/lib/ mkl_intel_lp64.lib mkl_intel_thread.lib mkl_core.lib > libiomp5md.lib" > > Satish > > > On Tue, 29 Sep 2020, Thuc Bui wrote: > > > Dear Petsc Users, > > > > > > > > I have successfully built Petsc v3.13.5 for Windows 10 VS2015 without > > Fortran compiler and without MPI. These successful builds are either > linked > > statically with Blas-Lapack or dynamically with Intel MKL. However, when > > linking dynamically to MKL, I would have to include 4 more Intel DLLs for > > building applications. I would like to have Petsc linking statically to > MKL > > to avoid having these extra DLLs, but have not been successful. Here is > how > > I run configure for static link > > > > > > > > ./configure --with-cc='win32fe cl' --with-cxx='win32fe cl' --with-fc=0 > > --with-openmp --with-debugging=0 --with-mpi=0 > > --with-blas-lapack-lib="-Wl,--start-group > > > /cygdrive/c/PROGRA~2/INTELS~1/COMPIL~1.279/windows/mkl/lib/mkl_intel_lp64.li > > b /cygdrive/c/PROGRA~2/INTELS~1/COMPIL~1.279/windows/mkl/lib/mkl_core.lib > > > /cygdrive/c/PROGRA~2/INTELS~1/COMPIL~1.279/windows/mkl/lib/mkl_intel_thread. > > lib -Wl,--end-group" > > > > > > > > I got this configuration error, > > > > > > > > > ============================================================================ > > === TESTING: checkLib from > > > config.packages.BlasLapack(config/BuildSystem/config/pack******************* > > ************************************************************ > > > > UNABLE to CONFIGURE with GIVEN OPTIONS (see configure.log for > > details): > > > > > ---------------------------------------------------------------------------- > > --- > > > > You set a value for --with-blaslapack-lib=<lib>, but ['-Wl,--start-group', > > > '/cygdrive/c/PROGRA~2/INTELS~1/COMPIL~1.279/windows/mkl/lib/mkl_intel_lp64.l > > ib', > > '/cygdrive/c/PROGRA~2/INTELS~1/COMPIL~1.279/windows/mkl/lib/mkl_core.lib', > > > '/cygdrive/c/PROGRA~2/INTELS~1/COMPIL~1.279/windows/mkl/lib/mkl_intel_thread > > .lib', '-Wl,--end-group'] cannot be used > > > > > **************************************************************************** > > *** > > > > > > > > Can someone point me to a proper syntax to link to MKL statically? > Attached > > is the configure.log if you need it. > > > > > > > > I have also tried unsuccessfuly, > > > > > --with-blas-lapack-lib="/cygdrive/c/PROGRA~2/INTELS~1/COMPIL~1.279/windows/m > > kl/lib/mkl_intel_lp64.lib > > /cygdrive/c/PROGRA~2/INTELS~1/COMPIL~1.279/windows/mkl/lib/mkl_core.lib > > > /cygdrive/c/PROGRA~2/INTELS~1/COMPIL~1.279/windows/mkl/lib/mkl_intel_thread. > > lib" > > > > or > > > > > --with-blas-lapack-lib="-L/cygdrive/c/PROGRA~2/INTELS~1/COMPIL~1.279/windows > > /mkl/lib -lmkl_intel_lp64.lib -lmkl_core.lib -lmkl_intel_thread.lib", > > > > or > > > > > --with-blas-lapack-lib="-L/cygdrive/c/PROGRA~2/INTELS~1/COMPIL~1.279/windows > > /mkl/lib mkl_intel_lp64.lib mkl_core.lib mkl_intel_thread.lib" > > > > and all gave the similar error message. > > > > > > > > Many thanks in advance for your help, > > > > Thuc Bui > > > > Senior R&D Engineer > > > > Calabazas Creek Research, Inc. > > > > (650) 948-5361 (Office) > > > > (650) 948-7562 (Fax) > > > > > > > > > > > > >
