Thanks, it is working fine. Mark On Wed, Jan 4, 2023 at 1:12 PM Jed Brown <[email protected]> wrote:
> This default probably shouldn't be zero, and probably lengthening steps > should be more gentle after a recent failure. But Mark, please let us know > if what's there works for you. > > "Zhang, Hong via petsc-users" <[email protected]> writes: > > > Hi Mark, > > > > You might want to try -ts_adapt_time_step_increase_delay to delay > increasing the time step after it has been decreased due to a failed solve. > > > > Hong (Mr.) > > > >> On Jan 2, 2023, at 12:17 PM, Mark Adams <[email protected]> wrote: > >> > >> I am using arkimex and the logic with a failed KSP solve is puzzling. > This step starts with a dt of ~.005, the linear solver fails and cuts the > time step by 1/4. So far, so good. The step then works but the next time > step the time step goes to ~0.006. > >> TS seems to have forgotten that it had to cut the time step back. > >> Perhaps that logic is missing or my parameters need work? > >> > >> Thanks, > >> Mark > >> > >> -ts_adapt_dt_max 0.01 # (source: command line) > >> -ts_adapt_monitor # (source: file) > >> -ts_arkimex_type 1bee # (source: file) > >> -ts_dt .001 # (source: command line) > >> -ts_max_reject 10 # (source: file) > >> -ts_max_snes_failures -1 # (source: file) > >> -ts_max_steps 8000 # (source: command line) > >> -ts_max_time 14 # (source: command line) > >> -ts_monitor # (source: file) > >> -ts_rtol 1e-6 # (source: command line) > >> -ts_type arkimex # (source: file) > >> > >> Nonlinear solve converged due to CONVERGED_SNORM_RELATIVE iterations 2 > >> TSAdapt basic arkimex 0:1bee step 1 accepted t=0.001 + > 2.497e-03 dt=5.404e-03 wlte=0.173 wltea= -1 wlter= > >> -1 > >> 2 TS dt 0.00540401 time 0.00349731 > >> 0 SNES Function norm 1.358886930084e-05 > >> Linear solve did not converge due to DIVERGED_ITS iterations 100 > >> Nonlinear solve did not converge due to DIVERGED_LINEAR_SOLVE > iterations 0 > >> TSAdapt basic step 2 stage rejected (DIVERGED_LINEAR_SOLVE) > t=0.00349731 + 5.404e-03 retrying with dt=1.351e-03 > >> 0 SNES Function norm 1.358886930084e-05 > >> Linear solve converged due to CONVERGED_RTOL iterations 19 > >> 1 SNES Function norm 4.412110425362e-10 > >> Linear solve converged due to CONVERGED_RTOL iterations 6 > >> 2 SNES Function norm 4.978968053066e-13 > >> Nonlinear solve converged due to CONVERGED_SNORM_RELATIVE iterations 2 > >> 0 SNES Function norm 8.549322067920e-06 > >> Linear solve converged due to CONVERGED_RTOL iterations 14 > >> 1 SNES Function norm 8.357075378456e-11 > >> Linear solve converged due to CONVERGED_RTOL iterations 4 > >> 2 SNES Function norm 4.983138402512e-13 > >> Nonlinear solve converged due to CONVERGED_SNORM_RELATIVE iterations 2 > >> 0 SNES Function norm 1.044832467924e-05 > >> Linear solve converged due to CONVERGED_RTOL iterations 13 > >> 1 SNES Function norm 1.036101875301e-10 > >> Linear solve converged due to CONVERGED_RTOL iterations 4 > >> 2 SNES Function norm 4.984888077288e-13 > >> Nonlinear solve converged due to CONVERGED_SNORM_RELATIVE iterations 2 > >> TSAdapt basic arkimex 0:1bee step 2 accepted t=0.00349731 + > 1.351e-03 dt=6.305e-03 wlte=0.0372 wltea= -1 wlter= > >> -1 > >> 3 TS dt 0.00630456 time 0.00484832 > >> 0 SNES Function norm 8.116559104264e-06 > >> Linear solve did not converge due to DIVERGED_ITS iterations 100 >
