Hello to all, I had try to set up openbsd as home router but eventually it fail to function properly.
External Interface (vr0) 192.168.1.2 255.255.255.0 none Internal Interface (rl0) 172.16.10.1 255.255.255.0 none Wireless Interface (ath0) 192.168.5.1 255.255.255.0 none *Routing Table* (route show | more) Destination Gateway Flags Interface default 126.96.36.199.254 UGS tun0 loopback loopback UGRS lo0 loopback loopback UH lo0 172.16.10/24 link#2 UC rl0 172.16.10.3 inet6 UHLC rl0 188.8.131.52 184.108.40.206 (PPPOE IP address) UH tun0 192.168.1/24 link#1 UC vr0 192.168.5/24 link#3 UC ath0 My wireless interface light is keep on blinking rather stay on stable mode. *Packet Filter Rules* (pfcrt -sr) nat on vr0 from !(vr0) to any -> (vr0) round-robin scrub on vr0 all no-df fragment reassemble scrub on vr0 all reassemble tcp block drop in log on vr0 all pass out quick on ath0/rl0 keep state. Please help me why my pc cannot connect to internet. My pc can even ping external interface ip address (192.168.1.2) but it shows no internet access. Please help. -- View this message in context: http://openbsd.7691.n7.nabble.com/Openbsd-Routing-Issues-tp244695.html Sent from the openbsd - packet filter mailing list archive at Nabble.com.