Is there anyway to compile the current pf into a 3.1 release? Amir Seyavash Mesry [EMAIL PROTECTED] LSI Logic Corporation http://www.lsilogic.com/ Raid Support Test Technician 6145-D Northbelt Parkway Norcross, GA 30071 678-728-1211 NOTICE: This communication may contain privileged or other confidential information. If you are not the intended recipient, or believe that you have received this communication in error, please do not print, copy, retransmit, disseminate, or otherwise use the information. Also, please indicate to the sender that you have received this communication in error, and delete the copy you received. Thank you.
-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of Daniel Hartmeier Sent: Friday, August 09, 2002 1:02 PM To: [EMAIL PROTECTED] Subject: Re: Proper Syntax for Limiting Ports per user group. On Fri, Aug 09, 2002 at 12:09:07PM -0400, Amir Seyavash Mesry wrote: > Can some one tell me what the proper syntax is for using the user & > group parameters in OpenBSD 3.1 & PF. This feature was added after the 3.1 release, so you'll need -current to use it. > pass out proto tcp from fxp0 port 33333 >< 55555 to any port 33333 >< > 55555 modulate state pass out on fxp0 proto tcp \ from any port 33333 >< to any port 33333 >< 55555 \ user 1001 group 1007 modulate state Daniel
BEGIN:VCARD VERSION:2.1 N:Mesry;Amir;Seyavash FN:Amir Seyavash Mesry ORG:LSI Logic Inc.;Raid TITLE:Raid Support Test Technician TEL;WORK;VOICE:(678) 728-1211 ADR;WORK:;;6145-D Northbelt Parkway;Norcross;GA;30071;United States of America LABEL;WORK;ENCODING=QUOTED-PRINTABLE:6145-D Northbelt Parkway=0D=0ANorcross, GA 30071=0D=0AUnited States of Ameri= ca ADR;POSTAL:;;6145-D Northbelt Parkway;Norcross;GA;30071;United States of America LABEL;POSTAL;ENCODING=QUOTED-PRINTABLE:6145-D Northbelt Parkway=0D=0ANorcross, GA 30071=0D=0AUnited States of Ameri= ca EMAIL;PREF;INTERNET:[EMAIL PROTECTED] REV:20020510T175919Z END:VCARD
