actually it was several months ago with 3.1-current, and i did not note exact values, to tell the truth, we were looking whether it will crash or not, becuase i observed that max # of states was 2K before this site, (sometimes, change in # of states was up to ~5K between two measurements). dmesg attached .. site is not using this firewalll, otherwise i could do better measurements, it was before EuroBSD con. :-)
-zd
Philipp Buehler - sysfive.com GmbH wrote:
On 21/12/2002, Zafer Dastan <[EMAIL PROTECTED]> wrote To [EMAIL PROTECTED]:hi all, most heavily site i tested for 24 hours with PIII 1.36 Tualitin with average state of 30K-43K with CPU load average of %20-%35 ...i guess you use cheap NICs, or the machine is doing other stuff, toodmesg? Ciao
OpenBSD 3.2-stable (d5) #7: Mon Nov 4 18:24:16 EET 2002
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/d5
cpu0: Intel Pentium III (Tualatin) ("GenuineIntel" 686-class) 1.36 GHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SYS,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SIMD
real mem = 133722112 (130588K)
avail mem = 118263808 (115492K)
using 1657 buffers containing 6787072 bytes (6628K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(a1) BIOS, date 01/04/02, BIOS32 rev. 0 @ 0xf0c30
pcibios0 at bios0: rev. 2.1 @ 0xf0000/0x1472
pcibios0: PCI IRQ Routing Table rev. 1.0 @ 0xf13a0/208 (11 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371FB PCI-ISA" rev 0x00)
pcibios0: PCI bus #2 is the last bus
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82815 Hub" rev 0x04
ppb0 at pci0 dev 1 function 0 "Intel 82815 AGP" rev 0x04
pci1 at ppb0 bus 1
ppb1 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0x05
pci2 at ppb1 bus 2
fxp0 at pci2 dev 9 function 0 "Intel 82557" rev 0x0c: irq 6, address 00:03:47:ae:d9:0a
inphy0 at fxp0 phy 1: i82555 10/100 media interface, rev. 4
fxp1 at pci2 dev 10 function 0 "Intel 82557" rev 0x0c: irq 9, address 00:03:47:ae:d8:7b
inphy1 at fxp1 phy 1: i82555 10/100 media interface, rev. 4
fxp2 at pci2 dev 11 function 0 "Intel 82557" rev 0x0c: irq 9, address 00:03:47:ae:d8:69
inphy2 at fxp2 phy 1: i82555 10/100 media interface, rev. 4
fxp3 at pci2 dev 12 function 0 "Intel 82557" rev 0x08: irq 5, address 00:03:47:e1:9c:f1
inphy3 at fxp3 phy 1: i82555 10/100 media interface, rev. 4
sdla0 at pci2 dev 14 function 0 vendor "V3 Semiconductor", unknown product 0x2 rev 0x05 irq 10
sdla0: Sangoma S514 adapter with 1 CPUs
pcib0 at pci0 dev 31 function 0 "Intel 82801BA LPC" rev 0x05
pciide0 at pci0 dev 31 function 1 "Intel 82801BA IDE" rev 0x05: DMA, channel 0 wired to compatibility, channel 1 wired to c
ompatibility
wd0 at pciide0 channel 0 drive 0: <064MB ATA Flash Disk>
wd0: 1-sector PIO, LBA, 61MB, 977 cyl, 4 head, 32 sec, 125056 sectors
wd0(pciide0:0:0): using PIO mode 4
"Intel 82801BA USB" rev 0x05 at pci0 dev 31 function 2 not configured
"Intel 82801BA SMBus" rev 0x05 at pci0 dev 31 function 3 not configured
"Intel 82801BA USB2" rev 0x05 at pci0 dev 31 function 4 not configured
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom0: console
biomask 4000 netmask 4660 ttymask 4662
rd0: fixed, 7120 blocks
dkcsum: wd0 matched BIOS disk 80
root on rd0a
rootdev=0x1100 rrootdev=0x2f00 rawdev=0x2f02
