I tried to put it in pf.conf and it was a no go. I rebooted to make sure everything would go fine, and it didn't work at all.
hmmmm On Thu, 2002-12-26 at 14:01, Henning Brauer wrote: > On Thu, Dec 26, 2002 at 10:25:12PM +0100, Daniel Hartmeier wrote: > > On Thu, Dec 26, 2002 at 01:30:03PM -0800, Bryan Irvine wrote: > > > > > pass in on rl0 proto tcp from any to rl0 port > 49151 keep state > > > > > > # pfctl -N /etc/nat.conf > > > /etc/nat.conf:5: filter rule not permitted in nat mode > > > pfctl: syntax error in file: nat rules not loaded > > > > Well, filter rules (like the pass rule you quote) go into /etc/pf.conf, > > and nat rules (nat, binat, rdr) go into /etc/nat.conf. Then you load the > > filter rules with pfctl -f /etc/pf.conf and the nat rules with pfctl -N > > -f /etc/nat.conf. > > well obviously here's some version confusion... Bryan _seems_ to talk about > OpenBSD 3.1 or earlier. there it is pfctl -R /etc/pf.conf and pfctl -N > /etc/nat.conf, no -f. in 3.2 and later these are merged, pfctl -f > /etc/pf.conf loads 'em all. -- Bryan Irvine <[EMAIL PROTECTED]>
