Greetz,
I want to figure out why pfctl isn't showing me statistics such as
passed/blocked packets, packets per seconds, etc. In previous
installations it has, but I must be missing something now.
============================================================
OpenBSD phantasm.sancho2k.net 3.2 GENERIC#25 i386
# pfctl -s info
Status: Enabled for 7 days 05:21:47 Debug: None
State Table Total Rate
current entries 2
searches 4574906 7.3/s
inserts 70411 0.1/s
removals 70409 0.1/s
Counters
match 70588 0.1/s
bad-offset 0 0.0/s
fragment 0 0.0/s
short 0 0.0/s
normalize 0 0.0/s
memory
============================================================
First entry in /etc/pf.conf:
set loginterface fxp2
fxp2 is configured as part of bridge0:
# ifconfig fxp2
fxp2: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500
address: 00:08:c7:ba:6f:95
media: Ethernet 100baseTX full-duplex
status: active
inet6 fe80::208:c7ff:feba:6f95%fxp2 prefixlen 64 scopeid 0x3
Suggestions?
--
DARREN SPRUELL
[EMAIL PROTECTED]
- Re: Extending reported stats Sancho2k.net Lists
- Re: Extending reported stats Henning Brauer
- Re: Extending reported stats Sancho2k.net Lists
- Re: Extending reported stats Daniel Hartmeier
- Re: Extending reported stats Sancho2k.net Lists
