[EMAIL PROTECTED] (Brent Bolin) wrote in message news:<[EMAIL PROTECTED]>...
> Hello,
>
> I am able to use round-robin from the lan -> net but not able to ssh from
> the firewall to the net.
>
> Currently using these rules to accomplish this -
>
> lan_net = "192.168.0.0/24"
> int_if = "dc0"
> ext_if1 = "fxp0"
> ext_if2 = "fxp1"
> ext_gw1 = "68.146.224.1"
> ext_gw2 = "142.59.76.1"
>
> # nat outgoing connections on each internet interface
> nat on $ext_if1 from $lan_net to any -> ($ext_if1)
> nat on $ext_if2 from $lan_net to any -> ($ext_if2)
>
> # default deny
> block in from any to any
> block out from any to any
>
> # pass all outgoing packets on internal interface
> pass out on $int_if from any to $lan_net
> # pass in quick any packets destined for the gateway itself
> pass in quick on $int_if from $lan_net to $int_if
> # load balance outgoing tcp traffic from internal network.
> pass in on $int_if route-to \
> { ($ext_if1 $ext_gw1), ($ext_if2 $ext_gw2) } round-robin \
> proto tcp from $lan_net to any flags S/SA modulate state
> # load balance outgoing udp and icmp traffic from internal network
> pass in on $int_if route-to \
> { ($ext_if1 $ext_gw1), ($ext_if2 $ext_gw2) } round-robin \
> proto { udp, icmp } from $lan_net to any keep state
>
> # general "pass out" rules for external interfaces
> pass out on $ext_if1 proto tcp from any to any flags S/SA modulate state
> pass out on $ext_if1 proto { udp, icmp } from any to any keep state
> pass out on $ext_if2 proto tcp from any to any flags S/SA modulate state
> pass out on $ext_if2 proto { udp, icmp } from any to any keep state
>
> # route packets from any IPs on $ext_if1 to $ext_gw1 and the same for
> # $ext_if2 and $ext_gw2
> pass out on $ext_if1 route-to ($ext_if2 $ext_gw2) from $ext_if2 to any
> pass out on $ext_if2 route-to ($ext_if1 $ext_gw1) from $ext_if1 to any
>
> There no default route set. What rules do I need to do this ?
>
> I would also like to run squid from the localhost.
Does anybody have Squid running on a pf firewall with two gateways
doing round-robin ?
Can't seem to get it to work. I have setup a default gateway and
rout-to rules but dosen't appear to work.
If someone has it working can you please post some rules.
btb
