hi, i think you don't need something so fast for this - so take a look at http://www.soekris.com/ (works like a charm with openbsd)
best regards Wolfgang Am Sa, den 10.07.2004 schrieb Gabriel Kuri um 4:58: > I am currently looking at purchasing some embedded hardware to build a > little firewall for my cable connection (3Mbps downstream/256Kbps up) to > run pf, altq, IPsec (vpn endpoint), multiple vLANs, DHCP, and DNS. > Currently, the plan is to initially load everything off the 256MB CF > card into a couple MFS partitions. I am currently looking at the > following hardware specs and would appreciate any comments, more > specifically with potential driver issues under OpenBSD. > > > processor: Via C3 1GHz (Nehemiah core) w/ crypto support > > PCI chipset: Via CLE266 (VT8623 & VT8325) > > LAN chipset: Realtek RTL8100C/RTL8110S > > PCMCIA chipset: Ricoh R5C486 (two type II/III slots) - compatible with > the Intel 82365SL register set > > memory: 512MB Crucial DDR 2100 > > CompactFlash: 256MB Sandisk Ultra II CF card for storage > > > if you really want the detail, the board I am looking at is the CV863A > from Lex Systems (http://www.lex.com.tw) > > thanks... > > > ----- > Gabriel Kuri | Operating Systems & Network Analyst > Instructional and Information Technology Division > http://www.csupomona.edu/~iit | +1 909 979 6363 > California State Polytechnic University, Pomona
