If there something we miss pleas correct us.Everything is write in
pf.conf(8). So
queue highq bandwidth 360Kb priority 3 cbq(borrow)
if there is some traffic on this queue cbq must reserv 360Kb even if
real transfer is 1Kb.Priority is something else.
--- Wes Santee <[EMAIL PROTECTED]> wrote:
> Tihomir Koychev wrote:
> > Hi
> > I have same problem with cbq and start using hfsc. Now i use both
> of
> > them. My experience with cbq show me that parent queue must be
> large
> > than you want.If you Have 1Mb line declare it like 1.2Mb or 1.4Mb
> but
> > do not assign extra bandwidth you add.
> >
> > --- Wes Santee <[EMAIL PROTECTED]> wrote:
> >
> >> Wes Santee wrote:
> >>> altq on $ext_if bandwidth 54Mb cbq queue { internal, external }
> >>> queue internal bandwidth 53104Kb priority 7 cbq(borrow)
> >>> queue external bandwidth 896Kb priority 4 cbq { highq, defaultq,
> >> lowq }
> >>> queue highq bandwidth 40% priority 3 cbq(borrow)
> >>> queue defaultq bandwidth 40% priority 2 cbq(default borrow)
> >>> queue lowq bandwidth 20% priority 1 qlimit 300 cbq(borrow)
> >>>
>
> Tihomir Koychev wrote:
> > queue external bandwidth 1200Kb priority 4 cbq { highq, defaultq,
> > lowq }
> > queue highq bandwidth 360Kb priority 3 cbq(borrow)
> > queue defaultq bandwidth 360Kb priority 2 cbq(default borrow)
> > queue lowq bandwidth 180Kb priority 1 qlimit 300 cbq(borrow)
> >
> > Try this
> >
> > If someone have other ideas let us know.
> >
>
> Thanks for the tip. I've tried it out, and there is some marginal
> improvement. But as you've probably noticed, it's still not ideal.
> I've also asked about this on the FreeBSD pf mailing list, but had no
> response there either. Either everyone is laughing at us in private
> because we're missing some fundamental property of cbq, or we've
> stumped
> the pf guru's. :)
>
> Cheers,
> -Wes
>
>
www.BetStrikes.com - futbolni prognozi Ôóòáîëíè ïðîãíîçè
