It may be that your PBDWE60.DLL is invalid.
I would check that:
1) PBDWE60.DLL is on your system
2) Its creation date is that of your other PB*.DLLs (your DLLs from
different PB releases)
If the above steps don't fix it, create a simple test window and application
(use PBs application generator) with a new CrossTab DataWindow. Try to
isolate the cause to either your application/PBLs, your database backend,
your PB installation/DLLs.
Also look at the PB Example Application for a CrossTab example. If the
example tests without error, that would isolate the cause to your
application's PBLs/objects or your DataBase backend or hardware. If you the
PB Example Application generates an error on a multiple row retrieve on a
CrossTab DW, the problem is your PB installation -- so reinstall PB.
Lester LaForce
[EMAIL PROTECTED]
Sr. Software Developer (Contractor)
Future Technologies, Inc.
Armed Forces Institute of Pathology
Washington DC
-----Original Message-----
From: Sawant Prasad [mailto:[EMAIL PROTECTED]]
Sent: Monday, September 18, 2000 2:44 AM
To: Daniel Coppersmith; [EMAIL PROTECTED]; Griffith, Daniel M.
Subject: PFCSIG Solution required in PB 6.5
I Require your help
Well I am running a few reports which are crosstab datawindow style.
Well in this reports if i retrieve data for a single row, the report runs
fine.
But if i retrieve data for all the rows it gives me the following error
PB60 caused an invalid page fault in
module PBDWE60.DLL at 0167:115183c9.
Registers:
EAX=00000000 CS=0167 EIP=115183c9 EFLGS=00010246
EBX=049115b8 SS=016f ESP=0081e750 EBP=07000000
ECX=ffffffff DS=016f ESI=07000000 FS=3e97
EDX=00000001 ES=016f EDI=07000000 GS=3db6
Bytes at CS:EIP:
f2 ae f7 d1 49 8b fb 8b f1 83 c9 ff 83 c6 02 0f
Stack dump:
04770c60 07000000 04748ce8 04748cd0 1153900a 04770c60 07000000 049115b8
04911598 07000000 04770c60 00000000 1151675e 04770c60 04748cd0 07000000
My original application was in PB 5.0. Now i have migrated to PB 6.5. My
database is Oracle 7.3
In PB 5.0 the same reports run fine with all the conditions But after
migration the same reports give me
the above mentioned problem. There was no error while migrating.
I have also re installed PB 6.5 but the problem occurs. I have tried to copy
this file from different machines, but the problem stays.
Can anyone help me out with a solution.
Is it due to migration. or some thing else
My machine is PII , 64 MB Ram , 10 GB Hard Disc.
This problem persits on all machines
<<error.txt>>
Prasad Sawant
Sr. Programmer
Bajaj Electricals Limited
> [EMAIL PROTECTED] HOSTED BY IIGG, INC. FOR HELP WITH LIST SERVE COMMANDS, ADDRESS
> A MESSAGE TO [EMAIL PROTECTED] WITH THE FOLLOWING MESSAGE: help pfcsig
> SEND ALL OTHER INQUIRES TO [EMAIL PROTECTED]
