Using Google's Daydream VR Headset for Augmented Reality and
Positional Tracking Applications

https://lauren.vortex.com/2018/05/20/using-googles-daydream-vr-headset-for-augmented-reality-and-positional-tracking-applications


When paired with a suitable higher-end Google or Samsung smartphone,
the Google Daydream VR headset (currently in its second generation
"2017" version, which is the version I'm discussing in this post)
offers an extremely inexpensive path for "virtual reality" and other
related experiences and experiments (the headset sometimes goes on
sale for as little as $50).

In addition to of course being able to display Daydream-compatible VR
apps, when a suitable Samsung phone is used it is also possible (via
an interesting sequence of actions) to use many Oculus/Samsung Gear VR
headset apps with the Daydream headset as well (feel free to contact
me if you're interested in the details on this).

At first glance (no pun intended) one would assume that Daydream
headsets are unsuitable for "augmented reality" VR applications that
require use of the phone camera, since the Daydream flap that holds
the phone in place completely blocks the back of the phone and the
camera lens. This also seemingly eliminates the possibility of
Daydream headset experimentation with "inside-out" 6DOF (six degrees
of freedom) applications, that leverage the phone's camera and
Google's "ARCore" platform to provide "positional tracking"
capabilities that conventionally have only been available with far
more expensive VR headsets.

We might consider drilling a hole through the rather thick flap of the
headset (which also includes an integral heat sink) but that's messy
at best and dependent on the exact position of the camera lens for any
specific phone.

So here's my alternative that requires zero modification of the
Daydream headset itself, and only a few simple parts to achieve -- an
elastic strap to hold the phone in place with the flap of the headset
left open and the phone camera lens exposed for use.

To view a set of photos showing the assembly sequence and the finished
design, please visit:

    https://lauren.vortex.com/daydream-mods

I used a piece of elastic that already had a plastic catch on the end
of suitable size to hold the elastic in place under the flap hinge.
Alternatively almost anything of similar dimensions could be attached
to a strip of elastic to achieve the same result.

You simply slide the completed assembly between the flap of the
headset and the main part of the headset, strap in the phone, and
you're ready to go. I originally tested this using a metal washer, but
decided that even wrapped in tape there was some risk of scratching
the phone. A better protected metal washer would probably be fine. I
printed up a custom-sized plastic washer to use instead.

The elastic holds the phone in place quite snugly, though with enough
violent head motion it might be possible to force the phone to slide
out from under the elastic. It should be straightforward to slip
little barriers on the sides to avoid this, or simply avoid violent
head motions! Also keep in mind that you don't want to apply
significant downward pressure to the open flap, since that would risk
potentially breaking the plastic supports that keep it from falling
further open.

Anyway, it's really just the elastic, the washer, and several small
cable ties!

OK, it's a hack. No apologies.

If you have any questions, please let me know!

And of course, be seeing you.

--Lauren--
Lauren Weinstein ([email protected]): https://www.vortex.com/lauren 
Lauren's Blog: https://lauren.vortex.com
Google Issues Mailing List: https://vortex.com/google-issues
Founder: Network Neutrality Squad: https://www.nnsquad.org 
         PRIVACY Forum: https://www.vortex.com/privacy-info
Co-Founder: People For Internet Responsibility: https://www.pfir.org/pfir-info
Member: ACM Committee on Computers and Public Policy
Google+: https://google.com/+LaurenWeinstein
Twitter: https://twitter.com/laurenweinstein
Tel: +1 (818) 225-2800
_______________________________________________
pfir mailing list
https://lists.pfir.org/mailman/listinfo/pfir

Reply via email to