Hi Sanket, I test the patch on windows7 and Ubuntu 14.10. It's working fine.
2015-04-17 12:54 GMT+03:00 Sanket Mehta <sanket.me...@enterprisedb.com>: > Hi Mehmet, > > I have modified the patch as explained below: > > After carefully reviewing the patch, we found that there is a memory leak > while error file handling. > > after opening the file in write mode using freopen(), we again open the > same file in read mode using fopen(). > at this time we are just opening a file without any stderr stream getting > redirected. So it should be closed after read operation. > Which was not happening before and its a memory leak. > > previously we were using the same FILE* which is used in freopen() for > opening the file using fopen(), so when we close the handler internally it > may have close the stream and thus we were not getting the std error for > the 2nd time. > > But now I have used another FILE* handler to open that file in read mode > using fopen() and closed it after read operation and it works fine. > Errors are getting logged in table every time properly. > > Another change is that we std errors should get logged in file every time > irrespective of output string is empty or not. so I have removed the > condition if(output == wxEmptyString) . > > I have attached the new patch here. > Please test and let me know if you think any changes requires. > > > Regards, > Sanket Mehta > Sr Software engineer > Enterprisedb > > On Wed, Apr 15, 2015 at 6:23 PM, Sanket Mehta < > sanket.me...@enterprisedb.com> wrote: > >> Hi, >> >> I have reviewed the patch. >> You are right Mehmet, previously 2nd time stderr was not coming to file. >> With this patch that issue is resolved. >> >> >> >> Regards, >> Sanket Mehta >> Sr Software engineer >> Enterprisedb >> >> On Wed, Apr 15, 2015 at 3:27 PM, Mehmet Emin KARAKAŞ <emin...@gmail.com> >> wrote: >> >>> Hi, >>> >>> >>> We are using the patch. But We make a mistake. Pgagent run the agent >>> first time, everything is perfect. But second batch run , pgagent is not >>> get stderr message. Then I have reviewed the patch. we are using "freopen" >>> for redirect stderr massage to file. Then we close the error file. But If >>> close the file, close the stderr message at the same time and I don't any >>> error message form stderror. So, I remove the fclose code for errorfile. >>> Now Every things is ok. >>> I make to test it on windows 7 and ubuntu 14.10. It is working fine. I >>> attached the patch in this mail. >>> >>> 2015-04-09 10:00 GMT+03:00 Sanket Mehta <sanket.me...@enterprisedb.com>: >>> >>>> Hi, >>>> >>>> I have reviewed the patch. >>>> It is working fine. >>>> >>>> Regards, >>>> Sanket Mehta >>>> Sr Software engineer >>>> Enterprisedb >>>> >>>> On Mon, Apr 6, 2015 at 7:30 PM, Mehmet Emin KARAKAŞ <emin...@gmail.com> >>>> wrote: >>>> >>>>> Hi, >>>>> >>>>> What is the last situation? I want to remove my repo and continue >>>>> original repo. >>>>> >>>>> Thanks for everything. >>>>> >>>>> >>>>> 2015-03-23 10:58 GMT+02:00 Ashesh Vashi <ashesh.va...@enterprisedb.com >>>>> >: >>>>> >>>>>> On Mon, Mar 23, 2015 at 2:26 PM, Mehmet Emin KARAKAŞ < >>>>>> emin...@gmail.com> wrote: >>>>>> >>>>>>> I send the diff in previous mail. The name >>>>>>> batch_cron_error_20150323.patch. You need to something diffrent. I don't >>>>>>> understand. >>>>>>> >>>>>>> Oops. >>>>>> I missed that. >>>>>> >>>>>> When I saw the job.cpp, I thought - you sent the whole files only. >>>>>> Thanks for the patch. >>>>>> >>>>>> Sanket, >>>>>> >>>>>> Can you please review the patch? >>>>>> >>>>>> >>>>>> -- >>>>>> >>>>>> Thanks & Regards, >>>>>> >>>>>> Ashesh Vashi >>>>>> EnterpriseDB INDIA: Enterprise PostgreSQL Company >>>>>> <http://www.enterprisedb.com> >>>>>> >>>>>> >>>>>> *http://www.linkedin.com/in/asheshvashi* >>>>>> <http://www.linkedin.com/in/asheshvashi> >>>>>> >>>>>>> >>>>>>> >>>>>>> 2015-03-23 10:36 GMT+02:00 Ashesh Vashi < >>>>>>> ashesh.va...@enterprisedb.com>: >>>>>>> >>>>>>>> Thanks Mehmet. >>>>>>>> Can you please send the diff (as a patch file) instead of the whole >>>>>>>> file? >>>>>>>> >>>>>>>> -- >>>>>>>> >>>>>>>> Thanks & Regards, >>>>>>>> >>>>>>>> Ashesh Vashi >>>>>>>> EnterpriseDB INDIA: Enterprise PostgreSQL Company >>>>>>>> <http://www.enterprisedb.com> >>>>>>>> >>>>>>>> >>>>>>>> *http://www.linkedin.com/in/asheshvashi* >>>>>>>> <http://www.linkedin.com/in/asheshvashi> >>>>>>>> >>>>>>>> On Mon, Mar 23, 2015 at 1:54 PM, Mehmet Emin KARAKAŞ < >>>>>>>> emin...@gmail.com> wrote: >>>>>>>> >>>>>>>>> Hi Ashesh, >>>>>>>>> >>>>>>>>> My test scenario is; >>>>>>>>> >>>>>>>>> "java -jar xxxx" command. >>>>>>>>> >>>>>>>>> xxx is not a file. I want to see a error message in pgadmin and >>>>>>>>> pga_jobsteplog table. I am waiting to "Error: Unable to access jarfile >>>>>>>>> xxxx" message in job log output. >>>>>>>>> >>>>>>>>> I make test the patch in windows 7 and ubuntu 14.10. In windows 7 >>>>>>>>> not problem, perfect working. But nix system (Ubuntu 14.10) debug >>>>>>>>> mode, I >>>>>>>>> just saw the massage in terminal. Then I added to message error file >>>>>>>>> to >>>>>>>>> output variable. >>>>>>>>> >>>>>>>>> Now It's working perfect windows and nix systems. I attach the new >>>>>>>>> patch in this message. >>>>>>>>> >>>>>>>>> >>>>>>>>> 2015-03-23 1:15 GMT+02:00 Mehmet Emin KARAKAŞ <emin...@gmail.com>: >>>>>>>>> >>>>>>>>>> Hi Ashesh , >>>>>>>>>> Sorry for late. I have test in today and share the results >>>>>>>>>> >>>>>>>>>> 2015-03-16 10:32 GMT+02:00 Ashesh Vashi < >>>>>>>>>> ashesh.va...@enterprisedb.com>: >>>>>>>>>> >>>>>>>>>>> On Mon, Mar 16, 2015 at 1:31 PM, Mehmet Emin KARAKAŞ < >>>>>>>>>>> emin...@gmail.com> wrote: >>>>>>>>>>> >>>>>>>>>>>> Hi, >>>>>>>>>>>> >>>>>>>>>>>> I have not tried the patch because last week was very run down. >>>>>>>>>>>> But I will try the patch in this week and I will share the result. >>>>>>>>>>>> >>>>>>>>>>> Thanks. >>>>>>>>>>> I really appreciate. >>>>>>>>>>> >>>>>>>>>>> [NOTE: Please keep the list in loop...] >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> -- >>>>>>>>>>> >>>>>>>>>>> Thanks & Regards, >>>>>>>>>>> >>>>>>>>>>> Ashesh Vashi >>>>>>>>>>> EnterpriseDB INDIA: Enterprise PostgreSQL Company >>>>>>>>>>> <http://www.enterprisedb.com> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> *http://www.linkedin.com/in/asheshvashi* >>>>>>>>>>> <http://www.linkedin.com/in/asheshvashi> >>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> 2015-03-16 6:16 GMT+02:00 Ashesh Vashi < >>>>>>>>>>>> ashesh.va...@enterprisedb.com>: >>>>>>>>>>>> >>>>>>>>>>>>> HI Mehmet, >>>>>>>>>>>>> >>>>>>>>>>>>> Do you have time to spend time for this? >>>>>>>>>>>>> Can you please review, and test the patch sent by Akshay? >>>>>>>>>>>>> >>>>>>>>>>>>> -- >>>>>>>>>>>>> >>>>>>>>>>>>> Thanks & Regards, >>>>>>>>>>>>> >>>>>>>>>>>>> Ashesh Vashi >>>>>>>>>>>>> EnterpriseDB INDIA: Enterprise PostgreSQL Company >>>>>>>>>>>>> <http://www.enterprisedb.com> >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> *http://www.linkedin.com/in/asheshvashi* >>>>>>>>>>>>> <http://www.linkedin.com/in/asheshvashi> >>>>>>>>>>>>> >>>>>>>>>>>>> On Thu, Mar 5, 2015 at 3:07 PM, Akshay Joshi < >>>>>>>>>>>>> akshay.jo...@enterprisedb.com> wrote: >>>>>>>>>>>>> >>>>>>>>>>>>>> Hi Mehmet >>>>>>>>>>>>>> >>>>>>>>>>>>>> I have added the logic in job.cpp file to read the error >>>>>>>>>>>>>> message, If batch job is failed. Attached is the patch file >>>>>>>>>>>>>> and job.cpp with the email. >>>>>>>>>>>>>> I haven't tested it because facing some difficulty in linking >>>>>>>>>>>>>> the project on Windows. Can you please apply the patch and test >>>>>>>>>>>>>> it at your >>>>>>>>>>>>>> end, also if you seen some modification please feel free to do >>>>>>>>>>>>>> it. >>>>>>>>>>>>>> >>>>>>>>>>>>>> On Wed, Mar 4, 2015 at 4:22 PM, Akshay Joshi < >>>>>>>>>>>>>> akshay.jo...@enterprisedb.com> wrote: >>>>>>>>>>>>>> >>>>>>>>>>>>>>> Sure. >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> On Wed, Mar 4, 2015 at 4:20 PM, Dave Page <dp...@pgadmin.org >>>>>>>>>>>>>>> > wrote: >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> On Wed, Mar 4, 2015 at 10:48 AM, Akshay Joshi < >>>>>>>>>>>>>>>> akshay.jo...@enterprisedb.com> wrote: >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> Dave, >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> On Wed, Mar 4, 2015 at 4:11 PM, Dave Page < >>>>>>>>>>>>>>>>> dp...@pgadmin.org> wrote: >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> Hi, >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> Mehmet may not be able to work on Windows, so one of us >>>>>>>>>>>>>>>>>> may have to deal with that. Did we not solve this already in >>>>>>>>>>>>>>>>>> PEM btw? >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> Yes we have solved it in PEM, I have send the source >>>>>>>>>>>>>>>>> code in my previous email. >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> Oh, that was it? Well that code is pretty well tried and >>>>>>>>>>>>>>>> tested, so maybe we should just use that. Perhaps you can send >>>>>>>>>>>>>>>> Mehmet a >>>>>>>>>>>>>>>> patch to test on his build? >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> On Wed, Mar 4, 2015 at 10:16 AM, Akshay Joshi < >>>>>>>>>>>>>>>>>> akshay.jo...@enterprisedb.com> wrote: >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> Hi Mehmet >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> I have reviewed the patch, but it is only for nix >>>>>>>>>>>>>>>>>>> machine. Can you please provide a patch where it should be >>>>>>>>>>>>>>>>>>> fixed for >>>>>>>>>>>>>>>>>>> Windows as well. I have implemented the same in one of my >>>>>>>>>>>>>>>>>>> project using >>>>>>>>>>>>>>>>>>> below logic which works for both windows and nix. You can >>>>>>>>>>>>>>>>>>> tried out the >>>>>>>>>>>>>>>>>>> below logic >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> errFile = 'xyz.txt'; >>>>>>>>>>>>>>>>>>> FILE *fpError = freopen(errFile.mb_str(), "w", stderr); >>>>>>>>>>>>>>>>>>> .... .... // If output is empty then either job did not >>>>>>>>>>>>>>>>>>> return any output >>>>>>>>>>>>>>>>>>> // or job threw some error into stderr. if (output == >>>>>>>>>>>>>>>>>>> wxEmptyString) { // Check script threw some error into >>>>>>>>>>>>>>>>>>> stderr if (fpError) { fclose(fpError); fpError = fopen( >>>>>>>>>>>>>>>>>>> errFile.mb_str(), "r"); if (fpError) { char buffer >>>>>>>>>>>>>>>>>>> [4098]; wxString errorMsg = wxEmptyString; while (!feof( >>>>>>>>>>>>>>>>>>> fpError)) { if (fgets(buffer, 4096, fpError) != NULL) >>>>>>>>>>>>>>>>>>> errorMsg += wxString(buffer, wxConvLibc); } fclose( >>>>>>>>>>>>>>>>>>> fpError); } } } >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> On Wed, Mar 4, 2015 at 10:41 AM, Ashesh Vashi < >>>>>>>>>>>>>>>>>>> ashesh.va...@enterprisedb.com> wrote: >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> Sure >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> Thanks & Regards, >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> Ashesh Vashi >>>>>>>>>>>>>>>>>>>> EnterpriseDB INDIA: Enterprise PostgreSQL Company >>>>>>>>>>>>>>>>>>>> <http://www.enterprisedb.com> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> *http://www.linkedin.com/in/asheshvashi* >>>>>>>>>>>>>>>>>>>> <http://www.linkedin.com/in/asheshvashi> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> On Tue, Mar 3, 2015 at 2:01 PM, Dave Page < >>>>>>>>>>>>>>>>>>>> dp...@pgadmin.org> wrote: >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> Ashesh; can you please get this reviewed and applied >>>>>>>>>>>>>>>>>>>>> if it looks OK? >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> Thanks. >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> On Tue, Mar 3, 2015 at 12:00 PM, Mehmet Emin KARAKAŞ < >>>>>>>>>>>>>>>>>>>>> emin...@gmail.com> wrote: >>>>>>>>>>>>>>>>>>>>> > Hi, >>>>>>>>>>>>>>>>>>>>> > If batch cron is failed, pgagent doesn't receive >>>>>>>>>>>>>>>>>>>>> error messages. We fix it. >>>>>>>>>>>>>>>>>>>>> > We canalized the stderr to stdout. This patch batch >>>>>>>>>>>>>>>>>>>>> cron receive error >>>>>>>>>>>>>>>>>>>>> > massages from nix machine. Git Diff Message and >>>>>>>>>>>>>>>>>>>>> job.cpp file is attached. >>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>> > Thanks. >>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>> > -- >>>>>>>>>>>>>>>>>>>>> > MEHMET EMİN KARAKAŞ >>>>>>>>>>>>>>>>>>>>> > Postgresql Global Username: emin100 >>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>> > diff --git a/job.cpp b/job.cpp >>>>>>>>>>>>>>>>>>>>> > index 00334ab..694be22 100644 >>>>>>>>>>>>>>>>>>>>> > --- a/job.cpp >>>>>>>>>>>>>>>>>>>>> > +++ b/job.cpp >>>>>>>>>>>>>>>>>>>>> > @@ -273,8 +273,11 @@ int Job::Execute() >>>>>>>>>>>>>>>>>>>>> > // The *nix way. >>>>>>>>>>>>>>>>>>>>> > FILE *fp_script; >>>>>>>>>>>>>>>>>>>>> > char buf[4098]; >>>>>>>>>>>>>>>>>>>>> > + >>>>>>>>>>>>>>>>>>>>> > + wxString wxSt = wxT(""); >>>>>>>>>>>>>>>>>>>>> > + wxSt.Printf( _("%s 2>&1"), >>>>>>>>>>>>>>>>>>>>> filename.c_str()); >>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>> > - fp_script = >>>>>>>>>>>>>>>>>>>>> > popen(filename.mb_str(wxConvUTF8), "r"); >>>>>>>>>>>>>>>>>>>>> > + fp_script = >>>>>>>>>>>>>>>>>>>>> popen(wxSt.mb_str(wxConvUTF8) , >>>>>>>>>>>>>>>>>>>>> > "r"); >>>>>>>>>>>>>>>>>>>>> > if (!fp_script) >>>>>>>>>>>>>>>>>>>>> > { >>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>> output.Printf(_("Couldn't execute >>>>>>>>>>>>>>>>>>>>> > script: %s, errno = %d"), filename.c_str(), errno); >>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>> > -- >>>>>>>>>>>>>>>>>>>>> > Sent via pgadmin-hackers mailing list ( >>>>>>>>>>>>>>>>>>>>> pgadmin-hackers@postgresql.org) >>>>>>>>>>>>>>>>>>>>> > To make changes to your subscription: >>>>>>>>>>>>>>>>>>>>> > http://www.postgresql.org/mailpref/pgadmin-hackers >>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>>>>>>> Dave Page >>>>>>>>>>>>>>>>>>>>> Blog: http://pgsnake.blogspot.com >>>>>>>>>>>>>>>>>>>>> Twitter: @pgsnake >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> EnterpriseDB UK: http://www.enterprisedb.com >>>>>>>>>>>>>>>>>>>>> The Enterprise PostgreSQL Company >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>>>>>>> Sent via pgadmin-hackers mailing list ( >>>>>>>>>>>>>>>>>>>>> pgadmin-hackers@postgresql.org) >>>>>>>>>>>>>>>>>>>>> To make changes to your subscription: >>>>>>>>>>>>>>>>>>>>> http://www.postgresql.org/mailpref/pgadmin-hackers >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>>>>> *Akshay Joshi* >>>>>>>>>>>>>>>>>>> *Principal Software Engineer * >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> *Phone: +91 20-3058-9517 <%2B91%2020-3058-9517>Mobile: >>>>>>>>>>>>>>>>>>> +91 976-788-8246* >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>>>> Dave Page >>>>>>>>>>>>>>>>>> Blog: http://pgsnake.blogspot.com >>>>>>>>>>>>>>>>>> Twitter: @pgsnake >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> EnterpriseDB UK: http://www.enterprisedb.com >>>>>>>>>>>>>>>>>> The Enterprise PostgreSQL Company >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>>> *Akshay Joshi* >>>>>>>>>>>>>>>>> *Principal Software Engineer * >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> *Phone: +91 20-3058-9517 <%2B91%2020-3058-9517>Mobile: +91 >>>>>>>>>>>>>>>>> 976-788-8246* >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>> Dave Page >>>>>>>>>>>>>>>> Blog: http://pgsnake.blogspot.com >>>>>>>>>>>>>>>> Twitter: @pgsnake >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> EnterpriseDB UK: http://www.enterprisedb.com >>>>>>>>>>>>>>>> The Enterprise PostgreSQL Company >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>> *Akshay Joshi* >>>>>>>>>>>>>>> *Principal Software Engineer * >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> *Phone: +91 20-3058-9517 <%2B91%2020-3058-9517>Mobile: +91 >>>>>>>>>>>>>>> 976-788-8246* >>>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> -- >>>>>>>>>>>>>> *Akshay Joshi* >>>>>>>>>>>>>> *Principal Software Engineer * >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> *Phone: +91 20-3058-9517 <%2B91%2020-3058-9517>Mobile: +91 >>>>>>>>>>>>>> 976-788-8246* >>>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> -- >>>>>>>>>>>> MEHMET EMİN KARAKAŞ >>>>>>>>>>>> Yazılım Uzmanı >>>>>>>>>>>> >>>>>>>>>>>> TURKSAT Uluslararası Uydu ve Kablo TV Operatörü >>>>>>>>>>>> Konya Yolu 40. Km. 06839 Golbasi / ANKARA - TÜRKİYE >>>>>>>>>>>> Tel : +90 312 615 32 73 >>>>>>>>>>>> Faks : +90 312 615 32 77 >>>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> -- >>>>>>>>>> MEHMET EMİN KARAKAŞ >>>>>>>>>> Yazılım Uzmanı >>>>>>>>>> >>>>>>>>>> TURKSAT Uluslararası Uydu ve Kablo TV Operatörü >>>>>>>>>> Konya Yolu 40. Km. 06839 Golbasi / ANKARA - TÜRKİYE >>>>>>>>>> Tel : +90 312 615 32 73 >>>>>>>>>> Faks : +90 312 615 32 77 >>>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> -- >>>>>>>>> MEHMET EMİN KARAKAŞ >>>>>>>>> Yazılım Uzmanı >>>>>>>>> >>>>>>>>> TURKSAT Uluslararası Uydu ve Kablo TV Operatörü >>>>>>>>> Konya Yolu 40. Km. 06839 Golbasi / ANKARA - TÜRKİYE >>>>>>>>> Tel : +90 312 615 32 73 >>>>>>>>> Faks : +90 312 615 32 77 >>>>>>>>> >>>>>>>> >>>>>>>> >>>>>>> >>>>>>> >>>>>>> -- >>>>>>> MEHMET EMİN KARAKAŞ >>>>>>> Yazılım Uzmanı >>>>>>> >>>>>>> TURKSAT Uluslararası Uydu ve Kablo TV Operatörü >>>>>>> Konya Yolu 40. Km. 06839 Golbasi / ANKARA - TÜRKİYE >>>>>>> Tel : +90 312 615 32 73 >>>>>>> Faks : +90 312 615 32 77 >>>>>>> >>>>>> >>>>>> >>>>> >>>>> >>>>> -- >>>>> MEHMET EMİN KARAKAŞ >>>>> Yazılım Uzmanı >>>>> >>>>> TURKSAT Uluslararası Uydu ve Kablo TV Operatörü >>>>> Konya Yolu 40. Km. 06839 Golbasi / ANKARA - TÜRKİYE >>>>> Tel : +90 312 615 32 73 >>>>> Faks : +90 312 615 32 77 >>>>> >>>> >>>> >>> >>> >>> -- >>> MEHMET EMİN KARAKAŞ >>> Yazılım Uzmanı >>> >>> TURKSAT Uluslararası Uydu ve Kablo TV Operatörü >>> Konya Yolu 40. Km. 06839 Golbasi / ANKARA - TÜRKİYE >>> Tel : +90 312 615 32 73 >>> Faks : +90 312 615 32 77 >>> >> >> > -- MEHMET EMİN KARAKAŞ Yazılım Uzmanı TURKSAT Uluslararası Uydu ve Kablo TV Operatörü Konya Yolu 40. Km. 06839 Golbasi / ANKARA - TÜRKİYE Tel : +90 312 615 32 73 Faks : +90 312 615 32 77
