Le 27/01/2011 22:52, Toshihiro Kitagawa a écrit :
> On Thu, 27 Jan 2011 22:37:56 +0100
> Guillaume Lelarge <guilla...@lelarge.info> wrote:
>
>> Le 27/01/2011 13:00, Guillaume Lelarge a écrit :
>>> Hi,
>>>
>>> Browsing through the configuration file is a quite daunting task because
>>> there is no organization in it. So, I tried to write it in a better way.
>>> Instead of a patch, here is the whole file. It's surely not a final
>>> version, but that's what I did till now.
>>>
>>> Is this something we would be interested in commiting? I think it makes
>>> it simpler to read. If we want to commit this, I'll first fix the other
>>> sample configuration files, so that they look the same, before commiting
>>> all of them.
>
> I think it's good idea.
> How about changing boolean values to "on/off" from "true/false"
> at this chance?
> pgpool.conf parser has already supported "on/off".
>
Done. See new version attached.
>> I attached a better one, showing if a parameter change requires a
>> restart of pgpool.
>
> Great!
>
Thanks :)
--
Guillaume
http://www.postgresql.fr
http://dalibo.com
# ----------------------------
# pgPool-II configuration file
# ----------------------------
#
# This file consists of lines of the form:
#
# name = value
#
# Whitespace may be used. Comments are introduced with "#" anywhere on a line.
# The complete list of parameter names and allowed values can be found in the
# pgPool-II documentation.
#
# This file is read on server startup and when the server receives a SIGHUP
# signal. If you edit the file on a running system, you have to SIGHUP the
# server for the changes to take effect, or use "pgpool reload". Some
# parameters, which are marked below, require a server shutdown and restart to
# take effect.
#
#------------------------------------------------------------------------------
# CONNECTIONS
#------------------------------------------------------------------------------
# - pgpool Connection Settings -
listen_addresses = 'localhost' # Host name or IP address to listen on:
# '*' for all, '' for no TCP/IP connections
# (change requires restart)
port = 9999 # Port number
# (change requires restart)
socket_dir = '/tmp' # Unix domain socket path
# The Debian package defaults to
# /var/run/postgresql
# (change requires restart)
# - pgpool Communication Manager Connection Settings -
pcp_port = 9898 # Port number for pcp
# (change requires restart)
pcp_socket_dir = '/tmp' # Unix domain socket path for pcp
# The Debian package defaults to
# /var/run/postgresql
# (change requires restart)
# - Backend Connection Settings -
#backend_hostname0 = 'host1' # Host name or IP address to connect to for
backend 0
#backend_port0 = 5432 # Port number for backend 0
#backend_weight0 = 1 # Weight for backend 0 (only in load
balancing mode)
#backend_data_directory0 = '/data' # Data directory for backend 0
#backend_hostname1 = 'host2'
#backend_port1 = 5433
#backend_weight1 = 1
#backend_data_directory1 = '/data1'
# - Authentication -
enable_pool_hba = off # Use pool_hba.conf for client authentication
authentication_timeout = 60 # Delay in seconds to complete client
authentication
# 0 means no timeout.
# - SSL Connections -
ssl = off # Enable SSL support
# (change requires restart)
#ssl_key = './server.key' # Path to the SSL private key file
# (change requires restart)
#ssl_cert = './server.cert' # Path to the SSL public certificate file
# (change requires restart)
#ssl_ca_cert = '' # Path to a single PEM format file
# containing CA root certificate(s)
# (change requires restart)
#ssl_ca_cert_dir = '' # Directory containing CA root certificate(s)
# (change requires restart)
#------------------------------------------------------------------------------
# POOLS
#------------------------------------------------------------------------------
# - Pool size -
num_init_children = 32 # Number of pools
# (change requires restart)
max_pool = 4 # Number of connections per pool
# (change requires restart)
# - Life time -
child_life_time = 300 # Pool exits after being idle for this many
seconds
child_max_connections = 0 # Pool exits after receiving that many
connections
# 0 means no exit
connection_life_time = 0 # Connection to backend closes after being
idle for this many seconds
# 0 means no close
client_idle_limit = 0 # Client is disconnected after being idle
for that many seconds
# (even inside an explicit transactions!)
# 0 means no disconnection
#------------------------------------------------------------------------------
# LOGS
#------------------------------------------------------------------------------
# - Where to log -
log_destination = 'stderr' # Where to log
# Valid values are combinations of stderr,
# and syslog. Default to stderr.
# - What to log -
print_timestamp = on # Print timestamp on each line
# (change requires restart)
log_connections = off # Log connections
log_hostname = off # Hostname will be shown in ps status
# and in logs if connections are logged
log_statement = off # Log all statements
log_per_node_statement = off # Log all statements
# with node and backend informations
log_standby_delay = 'none' # Log standby delay
# Valid values are combinations of always,
# if_over_threshold, none
# - Syslog specific -
syslog_facility = 'LOCAL0' # Syslog local facility. Default to LOCAL0
syslog_ident = 'pgpool' # Syslog program identification string
# Default to 'pgpool'
# - Debug -
debug_level = 0 # Debug message verbosity level
# 0 means no message, 1 or more mean verbose
#------------------------------------------------------------------------------
# FILE LOCATIONS
#------------------------------------------------------------------------------
pid_file_name = '/var/run/pgpool/pgpool.pid' # PID file name
# (change requires restart)
logdir = '/tmp' # Directory of pgPool status file
# (change requires restart)
#------------------------------------------------------------------------------
# CONNECTION POOLING MODE
#------------------------------------------------------------------------------
connection_cache = on # Activate connection pools
# (change requires restart)
# Semicolon separated list of queries
# to be issued at the end of a session
# The default is for 8.3 and later
reset_query_list = 'ABORT; DISCARD ALL'
# The following one is for 8.2 and before
#reset_query_list = 'ABORT; RESET ALL; SET SESSION AUTHORIZATION DEFAULT'
#------------------------------------------------------------------------------
# REPLICATION MODE
#------------------------------------------------------------------------------
replication_mode = off # Activate replication mode
# (change requires restart)
replicate_select = off # Replicate SELECT statements
# when in replication or parallel mode
# replicate_select is higher priority than
# load_balance_mode.
insert_lock = on # Automatically locks a table with INSERT
# statements to keep SERIAL data consistency
# Without SERIAL, no lock will be issued
lobj_lock_table = '' # When rewriting lo_creat command in
# replication mode, specify table name to
# lock
# - Degenerate handling -
replication_stop_on_mismatch = off
# On disagreement with the packet kind
# sent from backend, degenerate the node
# which is most likely "minority"
# If false, just force to exit this session
failover_if_affected_tuples_mismatch = off
# On disagreement with the number of affected
# tuples in UPDATE/DELETE queries, then
# degenerate the node which is most likely
# "minority".
# If false, just abort the transaction to
# keep the consistency
# - Online recovery -
recovery_user = 'nobody' # Online recovery user
recovery_password = '' # Online recovery password
recovery_1st_stage_command = '' # Executes a command in first stage
recovery_2nd_stage_command = '' # Executes a command in second stage
recovery_timeout = 90 # Timeout in seconds to wait for the
# recovering node's postmaster to start up
# 0 means no wait
client_idle_limit_in_recovery = 0 # Client is disconnected after being idle
# for that many seconds in the second stage
# of online recovery
# 0 means no disconnection
# -1 means immediate disconnection
#------------------------------------------------------------------------------
# LOAD BALANCING MODE
#------------------------------------------------------------------------------
load_balance_mode = off # Activate load balancing mode
# (change requires restart)
ignore_leading_white_space = on # Ignore leading white spaces of each query
white_function_list = '' # Comma separated list of function names
# that don't write to database
# Regexp are accepted
black_function_list = 'nextval,setval'
# Comma separated list of function names
# that write to database
# Regexp are accepted
#------------------------------------------------------------------------------
# MASTER/SLAVE MODE
#------------------------------------------------------------------------------
master_slave_mode = off # Activate master/slave mode
# (change requires restart)
master_slave_sub_mode = 'slony' # Master/slave sub mode
# Valid values are combinations slony or
# stream. Default is slony.
# (change requires restart)
# - Streaming -
delay_threshold = 0 # Threshold before detaching node
# Unit is in bytes
# Disabled (0) by default
# Health check should be enabled
# - Health check -
health_check_period = 0 # Health check period
# Disabled (0) by default
health_check_timeout = 20 # Health check timeout
# 0 means no timeout
health_check_user = 'nobody' # Health check user
# - Special commands -
failover_command = '' # Executes this command at failover
# Special values:
# %d = node id
# %h = host name
# %p = port number
# %D = database cluster path
# %m = new master node id
# %H = hostname of the new master node
# %M = old master node id
# %P = old primary node id
# %% = '%' character
failback_command = '' # Executes this command at failback.
# Special values:
# %d = node id
# %h = host name
# %p = port number
# %D = database cluster path
# %m = new master node id
# %H = hostname of the new master node
# %M = old master node id
# %P = old primary node id
# %% = '%' character
fail_over_on_backend_error = on # Initiates failover when writing to the
# backend communication socket fails
# This is the same behaviour of pgpool-II
# 2.2.x and previous releases
# If set to false, pgpool will report an
# error and disconnect the session.
#------------------------------------------------------------------------------
# PARALLEL AND QUERY CACHE MODE
#------------------------------------------------------------------------------
parallel_mode = off # Activates parallel query mode
# (change requires restart)
enable_query_cache = off # Activates query cache
# (change requires restart)
pgpool2_hostname = '' # Set pgpool2 hostname
# (change requires restart)
# - System DB info -
system_db_hostname = 'localhost' # (change requires restart)
system_db_port = 5432 # (change requires restart)
system_db_dbname = 'pgpool' # (change requires restart)
system_db_schema = 'pgpool_catalog' # (change requires restart)
system_db_user = 'pgpool' # (change requires restart)
system_db_password = '' # (change requires restart)
# Life time of relation cache in seconds. 0 means no cache
# expiration(the default).
# The relation cache is used for cache the query result against PostgreSQL
# system catalog to obtain various information including table structures
# or if it's a temporary table or not. The cache is maintained in a pgpool
# child local memory and being kept as long as it survives.
# If someone modify the table by using ALTER TABLE or some such, the relcache
# is not consistent anymore.
# For this purpose, cache_expiration controls the life time of the cache.
relcache_expire = 0;
_______________________________________________
Pgpool-hackers mailing list
Pgpool-hackers@pgfoundry.org
http://pgfoundry.org/mailman/listinfo/pgpool-hackers
