I can not apply this. Seems it has changed in the current tree. Here
is the current plperl.c file.
> Bruce Momjian wrote:
>
> > Can you send me a patch?
> >
> > > Hi,
> > >
> > > I have take a look to the source code concerning PL/Perl, it seems that 2
>variables
> > > have a bad call : errgv and na.
> > >
> > > If you replace them by their normal call (in 5.6.0) PL_errgv and PL_na you will
>get
> > > success to compile the lib plperl.so.
> > >
>
> This patch (simple diff) applies to postgresql-7.0.2.
> See attachment...
>
> Regards
>
> Gilles DAROLD
>
>
>
> 328c328
> < if (SvTRUE(GvSV(PL_errgv)))
> ---
> > if (SvTRUE(GvSV(errgv)))
> 334c334
> < elog(ERROR, "creation of function failed : %s", SvPV(GvSV(PL_errgv),
>PL_na));
> ---
> > elog(ERROR, "creation of function failed : %s", SvPV(GvSV(errgv), na));
> 444c444
> < if (SvTRUE(GvSV(PL_errgv)))
> ---
> > if (SvTRUE(GvSV(errgv)))
> 450c450
> < elog(ERROR, "plperl : error from function : %s", SvPV(GvSV(PL_errgv),
>PL_na));
> ---
> > elog(ERROR, "plperl : error from function : %s", SvPV(GvSV(errgv),
>na));
> 654c654
> < (SvPV(perlret, PL_na),
> ---
> > (SvPV(perlret, na),
> 2192c2192
> < output = perl_eval_pv(SvPV(output, PL_na), TRUE);
> ---
> > output = perl_eval_pv(SvPV(output, na), TRUE);
--
Bruce Momjian | http://candle.pha.pa.us
[EMAIL PROTECTED] | (610) 853-3000
+ If your life is a hard drive, | 830 Blythe Avenue
+ Christ can be your backup. | Drexel Hill, Pennsylvania 19026
/**********************************************************************
* plperl.c - perl as a procedural language for PostgreSQL
*
* IDENTIFICATION
*
* This software is copyrighted by Mark Hollomon
* but is shameless cribbed from pltcl.c by Jan Weick.
*
* The author hereby grants permission to use, copy, modify,
* distribute, and license this software and its documentation
* for any purpose, provided that existing copyright notices are
* retained in all copies and that this notice is included
* verbatim in any distributions. No written agreement, license,
* or royalty fee is required for any of the authorized uses.
* Modifications to this software may be copyrighted by their
* author and need not follow the licensing terms described
* here, provided that the new terms are clearly indicated on
* the first page of each file where they apply.
*
* IN NO EVENT SHALL THE AUTHOR OR DISTRIBUTORS BE LIABLE TO ANY
* PARTY FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR
* CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OF THIS
* SOFTWARE, ITS DOCUMENTATION, OR ANY DERIVATIVES THEREOF, EVEN
* IF THE AUTHOR HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH
* DAMAGE.
*
* THE AUTHOR AND DISTRIBUTORS SPECIFICALLY DISCLAIM ANY
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR
* PURPOSE, AND NON-INFRINGEMENT. THIS SOFTWARE IS PROVIDED ON
* AN "AS IS" BASIS, AND THE AUTHOR AND DISTRIBUTORS HAVE NO
* OBLIGATION TO PROVIDE MAINTENANCE, SUPPORT, UPDATES,
* ENHANCEMENTS, OR MODIFICATIONS.
*
* IDENTIFICATION
* $Header: /home/projects/pgsql/cvsroot/pgsql/src/pl/plperl/plperl.c,v 1.13
2000/09/12 04:28:30 momjian Exp $
*
**********************************************************************/
/* system stuff */
#include <stdio.h>
#include <stdlib.h>
#include <stdarg.h>
#include <unistd.h>
#include <fcntl.h>
#include <string.h>
#include <setjmp.h>
/* postgreSQL stuff */
#include "executor/spi.h"
#include "commands/trigger.h"
#include "utils/elog.h"
#include "fmgr.h"
#include "access/heapam.h"
#include "tcop/tcopprot.h"
#include "utils/syscache.h"
#include "catalog/pg_proc.h"
#include "catalog/pg_type.h"
/* perl stuff */
/*
* Evil Code Alert
*
* both posgreSQL and perl try to do 'the right thing'
* and provide union semun if the platform doesn't define
* it in a system header.
* psql uses HAVE_UNION_SEMUN
* perl uses HAS_UNION_SEMUN
* together, they cause compile errors.
* If we need it, the psql headers above will provide it.
* So we tell perl that we have it.
*/
#ifndef HAS_UNION_SEMUN
#define HAS_UNION_SEMUN
#endif
#include "EXTERN.h"
#include "perl.h"
/**********************************************************************
* The information we cache about loaded procedures
**********************************************************************/
typedef struct plperl_proc_desc
{
char *proname;
FmgrInfo result_in_func;
Oid result_in_elem;
int result_in_len;
int nargs;
FmgrInfo arg_out_func[FUNC_MAX_ARGS];
Oid arg_out_elem[FUNC_MAX_ARGS];
int arg_out_len[FUNC_MAX_ARGS];
int arg_is_rel[FUNC_MAX_ARGS];
SV *reference;
} plperl_proc_desc;
/**********************************************************************
* The information we cache about prepared and saved plans
**********************************************************************/
typedef struct plperl_query_desc
{
char qname[20];
void *plan;
int nargs;
Oid *argtypes;
FmgrInfo *arginfuncs;
Oid *argtypelems;
Datum *argvalues;
int *arglen;
} plperl_query_desc;
/**********************************************************************
* Global data
**********************************************************************/
static int plperl_firstcall = 1;
static int plperl_call_level = 0;
static int plperl_restart_in_progress = 0;
static PerlInterpreter *plperl_safe_interp = NULL;
static HV *plperl_proc_hash = NULL;
#if REALLYHAVEITONTHEBALL
static Tcl_HashTable *plperl_query_hash = NULL;
#endif
/**********************************************************************
* Forward declarations
**********************************************************************/
static void plperl_init_all(void);
static void plperl_init_safe_interp(void);
Datum plperl_call_handler(PG_FUNCTION_ARGS);
static Datum plperl_func_handler(PG_FUNCTION_ARGS);
static SV *plperl_build_tuple_argument(HeapTuple tuple, TupleDesc tupdesc);
static void plperl_init_shared_libs(void);
#ifdef REALLYHAVEITONTHEBALL
static HeapTuple plperl_trigger_handler(PG_FUNCTION_ARGS);
static int plperl_elog(ClientData cdata, Tcl_Interp *interp,
int argc, char *argv[]);
static int plperl_quote(ClientData cdata, Tcl_Interp *interp,
int argc, char *argv[]);
static int plperl_SPI_exec(ClientData cdata, Tcl_Interp *interp,
int argc, char *argv[]);
static int plperl_SPI_prepare(ClientData cdata, Tcl_Interp *interp,
int argc, char *argv[]);
static int plperl_SPI_execp(ClientData cdata, Tcl_Interp *interp,
int argc, char *argv[]);
static void plperl_set_tuple_values(Tcl_Interp *interp, char *arrayname,
int tupno, HeapTuple tuple, TupleDesc
tupdesc);
#endif
/**********************************************************************
* plperl_init_all() - Initialize all
**********************************************************************/
static void
plperl_init_all(void)
{
/************************************************************
* Do initialization only once
************************************************************/
if (!plperl_firstcall)
return;
/************************************************************
* Destroy the existing safe interpreter
************************************************************/
if (plperl_safe_interp != NULL)
{
perl_destruct(plperl_safe_interp);
perl_free(plperl_safe_interp);
plperl_safe_interp = NULL;
}
/************************************************************
* Free the proc hash table
************************************************************/
if (plperl_proc_hash != NULL)
{
hv_undef(plperl_proc_hash);
SvREFCNT_dec((SV *) plperl_proc_hash);
plperl_proc_hash = NULL;
}
/************************************************************
* Free the prepared query hash table
************************************************************/
/*
* if (plperl_query_hash != NULL) { }
*/
/************************************************************
* Now recreate a new safe interpreter
************************************************************/
plperl_init_safe_interp();
plperl_firstcall = 0;
return;
}
/**********************************************************************
* plperl_init_safe_interp() - Create the safe Perl interpreter
**********************************************************************/
static void
plperl_init_safe_interp(void)
{
char *embedding[3] = {
"", "-e",
/* no commas between the next 4 please. They are supposed to be one
string
*/
"require Safe; SPI::bootstrap();"
"sub ::mksafefunc { my $x = new Safe; $x->permit_only(':default');"
"$x->share(qw[&elog &DEBUG &NOTICE &NOIND &ERROR]);"
" return $x->reval(qq[sub { $_[0] }]); }"
};
plperl_safe_interp = perl_alloc();
if (!plperl_safe_interp)
elog(ERROR, "plperl_init_safe_interp(): could not allocate perl
interpreter");
perl_construct(plperl_safe_interp);
perl_parse(plperl_safe_interp, plperl_init_shared_libs, 3, embedding, NULL);
perl_run(plperl_safe_interp);
/************************************************************
* Initialize the proc and query hash tables
************************* ***********************************/
plperl_proc_hash = newHV();
}
/**********************************************************************
* plperl_call_handler - This is the only visible function
* of the PL interpreter. The PostgreSQL
* function manager and trigger manager
* call this function for execution of
* perl procedures.
**********************************************************************/
/* keep non-static */
Datum
plperl_call_handler(PG_FUNCTION_ARGS)
{
Datum retval;
/************************************************************
* Initialize interpreters on first call
************************************************************/
if (plperl_firstcall)
plperl_init_all();
/************************************************************
* Connect to SPI manager
************************************************************/
if (SPI_connect() != SPI_OK_CONNECT)
elog(ERROR, "plperl: cannot connect to SPI manager");
/************************************************************
* Keep track about the nesting of Tcl-SPI-Tcl-... calls
************************************************************/
plperl_call_level++;
/************************************************************
* Determine if called as function or trigger and
* call appropriate subhandler
************************************************************/
if (CALLED_AS_TRIGGER(fcinfo))
{
elog(ERROR, "plperl: can't use perl in triggers yet.");
/*
* retval = PointerGetDatum(plperl_trigger_handler(fcinfo));
*/
/* make the compiler happy */
retval = (Datum) 0;
}
else
retval = plperl_func_handler(fcinfo);
plperl_call_level--;
return retval;
}
/**********************************************************************
* plperl_create_sub() - calls the perl interpreter to
* create the anonymous subroutine whose text is in the SV.
* Returns the SV containing the RV to the closure.
**********************************************************************/
static
SV *
plperl_create_sub(char * s)
{
dSP;
SV *subref = NULL;
int count;
ENTER;
SAVETMPS;
PUSHMARK(SP);
XPUSHs(sv_2mortal(newSVpv(s,0)));
PUTBACK;
count = perl_call_pv("mksafefunc", G_SCALAR | G_EVAL | G_KEEPERR);
SPAGAIN;
if (SvTRUE(ERRSV))
{
POPs;
PUTBACK;
FREETMPS;
LEAVE;
elog(ERROR, "creation of function failed : %s", SvPV_nolen(ERRSV));
}
if (count != 1) {
elog(ERROR, "creation of function failed - no return from mksafefunc");
}
/*
* need to make a deep copy of the return. it comes off the stack as a
* temporary.
*/
subref = newSVsv(POPs);
if (!SvROK(subref))
{
PUTBACK;
FREETMPS;
LEAVE;
/*
* subref is our responsibility because it is not mortal
*/
SvREFCNT_dec(subref);
elog(ERROR, "plperl_create_sub: didn't get a code ref");
}
PUTBACK;
FREETMPS;
LEAVE;
return subref;
}
/**********************************************************************
* plperl_init_shared_libs() -
*
* We cannot use the DynaLoader directly to get at the Opcode
* module (used by Safe.pm). So, we link Opcode into ourselves
* and do the initialization behind perl's back.
*
**********************************************************************/
extern void boot_Opcode _((CV * cv));
extern void boot_SPI _((CV * cv));
static void
plperl_init_shared_libs(void)
{
char *file = __FILE__;
newXS("Opcode::bootstrap", boot_Opcode, file);
newXS("SPI::bootstrap", boot_SPI, file);
}
/**********************************************************************
* plperl_call_perl_func() - calls a perl function through the RV
* stored in the prodesc structure. massages the input parms
properly
**********************************************************************/
static
SV *
plperl_call_perl_func(plperl_proc_desc * desc, FunctionCallInfo fcinfo)
{
dSP;
SV *retval;
int i;
int count;
ENTER;
SAVETMPS;
PUSHMARK(sp);
for (i = 0; i < desc->nargs; i++)
{
if (desc->arg_is_rel[i])
{
TupleTableSlot *slot = (TupleTableSlot *) fcinfo->arg[i];
SV *hashref;
Assert(slot != NULL && ! fcinfo->argnull[i]);
/*
* plperl_build_tuple_argument better return a mortal SV.
*/
hashref = plperl_build_tuple_argument(slot->val,
slot->ttc_tupleDescriptor);
XPUSHs(hashref);
}
else
{
if (fcinfo->argnull[i])
{
XPUSHs(&PL_sv_undef);
}
else
{
char *tmp;
tmp =
DatumGetCString(FunctionCall3(&(desc->arg_out_func[i]),
fcinfo->arg[i],
ObjectIdGetDatum(desc->arg_out_elem[i]),
Int32GetDatum(desc->arg_out_len[i])));
XPUSHs(sv_2mortal(newSVpv(tmp, 0)));
pfree(tmp);
}
}
}
PUTBACK;
count = perl_call_sv(desc->reference, G_SCALAR | G_EVAL | G_KEEPERR);
SPAGAIN;
if (count != 1)
{
PUTBACK;
FREETMPS;
LEAVE;
elog(ERROR, "plperl : didn't get a return item from function");
}
if (SvTRUE(ERRSV))
{
POPs;
PUTBACK;
FREETMPS;
LEAVE;
elog(ERROR, "plperl : error from function : %s", SvPV_nolen(ERRSV));
}
retval = newSVsv(POPs);
PUTBACK;
FREETMPS;
LEAVE;
return retval;
}
/**********************************************************************
* plperl_func_handler() - Handler for regular function calls
**********************************************************************/
static Datum
plperl_func_handler(PG_FUNCTION_ARGS)
{
int i;
char internal_proname[512];
int proname_len;
plperl_proc_desc *prodesc;
SV *perlret;
Datum retval;
sigjmp_buf save_restart;
/************************************************************
* Build our internal proc name from the functions Oid
************************************************************/
sprintf(internal_proname, "__PLPerl_proc_%u", fcinfo->flinfo->fn_oid);
proname_len = strlen(internal_proname);
/************************************************************
* Lookup the internal proc name in the hashtable
************************************************************/
if (!hv_exists(plperl_proc_hash, internal_proname, proname_len))
{
/************************************************************
* If we haven't found it in the hashtable, we analyze
* the functions arguments and returntype and store
* the in-/out-functions in the prodesc block and create
* a new hashtable entry for it.
*
* Then we load the procedure into the safe interpreter.
************************************************************/
HeapTuple procTup;
HeapTuple typeTup;
Form_pg_proc procStruct;
Form_pg_type typeStruct;
char *proc_source;
/************************************************************
* Allocate a new procedure description block
************************************************************/
prodesc = (plperl_proc_desc *) malloc(sizeof(plperl_proc_desc));
prodesc->proname = malloc(strlen(internal_proname) + 1);
strcpy(prodesc->proname, internal_proname);
/************************************************************
* Lookup the pg_proc tuple by Oid
************************************************************/
procTup = SearchSysCacheTuple(PROCOID,
ObjectIdGetDatum(fcinfo->flinfo->fn_oid),
0, 0, 0);
if (!HeapTupleIsValid(procTup))
{
free(prodesc->proname);
free(prodesc);
elog(ERROR, "plperl: cache lookup for proc %u failed",
fcinfo->flinfo->fn_oid);
}
procStruct = (Form_pg_proc) GETSTRUCT(procTup);
/************************************************************
* Get the required information for input conversion of the
* return value.
************************************************************/
typeTup = SearchSysCacheTuple(TYPEOID,
ObjectIdGetDatum(procStruct->prorettype),
0, 0, 0);
if (!HeapTupleIsValid(typeTup))
{
free(prodesc->proname);
free(prodesc);
elog(ERROR, "plperl: cache lookup for return type %u failed",
procStruct->prorettype);
}
typeStruct = (Form_pg_type) GETSTRUCT(typeTup);
if (typeStruct->typrelid != InvalidOid)
{
free(prodesc->proname);
free(prodesc);
elog(ERROR, "plperl: return types of tuples not supported
yet");
}
fmgr_info(typeStruct->typinput, &(prodesc->result_in_func));
prodesc->result_in_elem = (Oid) (typeStruct->typelem);
prodesc->result_in_len = typeStruct->typlen;
/************************************************************
* Get the required information for output conversion
* of all procedure arguments
************************************************************/
prodesc->nargs = procStruct->pronargs;
for (i = 0; i < prodesc->nargs; i++)
{
typeTup = SearchSysCacheTuple(TYPEOID,
ObjectIdGetDatum(procStruct->proargtypes[i]),
0,
0, 0);
if (!HeapTupleIsValid(typeTup))
{
free(prodesc->proname);
free(prodesc);
elog(ERROR, "plperl: cache lookup for argument type %u
failed",
procStruct->proargtypes[i]);
}
typeStruct = (Form_pg_type) GETSTRUCT(typeTup);
if (typeStruct->typrelid != InvalidOid)
prodesc->arg_is_rel[i] = 1;
else
prodesc->arg_is_rel[i] = 0;
fmgr_info(typeStruct->typoutput, &(prodesc->arg_out_func[i]));
prodesc->arg_out_elem[i] = (Oid) (typeStruct->typelem);
prodesc->arg_out_len[i] = typeStruct->typlen;
}
/************************************************************
* create the text of the anonymous subroutine.
* we do not use a named subroutine so that we can call directly
* through the reference.
*
************************************************************/
proc_source = DatumGetCString(DirectFunctionCall1(textout,
PointerGetDatum(&procStruct->prosrc)));
/************************************************************
* Create the procedure in the interpreter
************************************************************/
prodesc->reference = plperl_create_sub(proc_source);
pfree(proc_source);
if (!prodesc->reference)
{
free(prodesc->proname);
free(prodesc);
elog(ERROR, "plperl: cannot create internal procedure %s",
internal_proname);
}
/************************************************************
* Add the proc description block to the hashtable
************************************************************/
hv_store(plperl_proc_hash, internal_proname, proname_len,
newSViv((IV) prodesc), 0);
}
else
{
/************************************************************
* Found the proc description block in the hashtable
************************************************************/
prodesc = (plperl_proc_desc *) SvIV(*hv_fetch(plperl_proc_hash,
internal_proname, proname_len, 0));
}
memcpy(&save_restart, &Warn_restart, sizeof(save_restart));
if (sigsetjmp(Warn_restart, 1) != 0)
{
memcpy(&Warn_restart, &save_restart, sizeof(Warn_restart));
plperl_restart_in_progress = 1;
if (--plperl_call_level == 0)
plperl_restart_in_progress = 0;
siglongjmp(Warn_restart, 1);
}
/************************************************************
* Call the Perl function
************************************************************/
perlret = plperl_call_perl_func(prodesc, fcinfo);
/************************************************************
* Disconnect from SPI manager and then create the return
* values datum (if the input function does a palloc for it
* this must not be allocated in the SPI memory context
* because SPI_finish would free it).
************************************************************/
if (SPI_finish() != SPI_OK_FINISH)
elog(ERROR, "plperl: SPI_finish() failed");
/* XXX is this the approved way to check for an undef result? */
if (perlret == &PL_sv_undef)
{
retval = (Datum) 0;
fcinfo->isnull = true;
}
else
{
retval = FunctionCall3(&prodesc->result_in_func,
PointerGetDatum(SvPV_nolen(perlret)),
ObjectIdGetDatum(prodesc->result_in_elem),
Int32GetDatum(prodesc->result_in_len));
}
SvREFCNT_dec(perlret);
memcpy(&Warn_restart, &save_restart, sizeof(Warn_restart));
if (plperl_restart_in_progress)
{
if (--plperl_call_level == 0)
plperl_restart_in_progress = 0;
siglongjmp(Warn_restart, 1);
}
return retval;
}
#ifdef REALLYHAVEITONTHEBALL
/**********************************************************************
* plperl_trigger_handler() - Handler for trigger calls
**********************************************************************/
static HeapTuple
plperl_trigger_handler(PG_FUNCTION_ARGS)
{
TriggerData *trigdata = (TriggerData *) fcinfo->context;
char internal_proname[512];
char *stroid;
Tcl_HashEntry *hashent;
int hashnew;
plperl_proc_desc *prodesc;
TupleDesc tupdesc;
HeapTuple rettup;
Tcl_DString tcl_cmd;
Tcl_DString tcl_trigtup;
Tcl_DString tcl_newtup;
int tcl_rc;
int i;
int *modattrs;
Datum *modvalues;
char *modnulls;
int ret_numvals;
char **ret_values;
sigjmp_buf save_restart;
/************************************************************
* Build our internal proc name from the functions Oid
************************************************************/
sprintf(internal_proname, "__PLPerl_proc_%u", fcinfo->flinfo->fn_oid);
/************************************************************
* Lookup the internal proc name in the hashtable
************************************************************/
hashent = Tcl_FindHashEntry(plperl_proc_hash, internal_proname);
if (hashent == NULL)
{
/************************************************************
* If we haven't found it in the hashtable,
* we load the procedure into the safe interpreter.
************************************************************/
Tcl_DString proc_internal_def;
Tcl_DString proc_internal_body;
HeapTuple procTup;
Form_pg_proc procStruct;
char *proc_source;
/************************************************************
* Allocate a new procedure description block
************************************************************/
prodesc = (plperl_proc_desc *) malloc(sizeof(plperl_proc_desc));
memset(prodesc, 0, sizeof(plperl_proc_desc));
prodesc->proname = malloc(strlen(internal_proname) + 1);
strcpy(prodesc->proname, internal_proname);
/************************************************************
* Lookup the pg_proc tuple by Oid
************************************************************/
procTup = SearchSysCacheTuple(PROCOID,
ObjectIdGetDatum(fcinfo->flinfo->fn_oid),
0, 0, 0);
if (!HeapTupleIsValid(procTup))
{
free(prodesc->proname);
free(prodesc);
elog(ERROR, "plperl: cache lookup for proc %u failed",
fcinfo->flinfo->fn_oid);
}
procStruct = (Form_pg_proc) GETSTRUCT(procTup);
/************************************************************
* Create the tcl command to define the internal
* procedure
************************************************************/
Tcl_DStringInit(&proc_internal_def);
Tcl_DStringInit(&proc_internal_body);
Tcl_DStringAppendElement(&proc_internal_def, "proc");
Tcl_DStringAppendElement(&proc_internal_def, internal_proname);
Tcl_DStringAppendElement(&proc_internal_def,
"TG_name TG_relid
TG_relatts TG_when TG_level TG_op __PLTcl_Tup_NEW __PLTcl_Tup_OLD args");
/************************************************************
* prefix procedure body with
* upvar #0 <internal_procname> GD
* and with appropriate setting of NEW, OLD,
* and the arguments as numerical variables.
************************************************************/
Tcl_DStringAppend(&proc_internal_body, "upvar #0 ", -1);
Tcl_DStringAppend(&proc_internal_body, internal_proname, -1);
Tcl_DStringAppend(&proc_internal_body, " GD\n", -1);
Tcl_DStringAppend(&proc_internal_body,
"array set NEW $__PLTcl_Tup_NEW\n",
-1);
Tcl_DStringAppend(&proc_internal_body,
"array set OLD $__PLTcl_Tup_OLD\n",
-1);
Tcl_DStringAppend(&proc_internal_body,
"set i 0\n"
"set v 0\n"
"foreach v $args {\n"
" incr i\n"
" set $i $v\n"
"}\n"
"unset i v\n\n", -1);
proc_source = DatumGetCString(DirectFunctionCall1(textout,
PointerGetDatum(&procStruct->prosrc)));
Tcl_DStringAppend(&proc_internal_body, proc_source, -1);
pfree(proc_source);
Tcl_DStringAppendElement(&proc_internal_def,
Tcl_DStringValue(&proc_internal_body));
Tcl_DStringFree(&proc_internal_body);
/************************************************************
* Create the procedure in the safe interpreter
************************************************************/
tcl_rc = Tcl_GlobalEval(plperl_safe_interp,
Tcl_DStringValue(&proc_internal_def));
Tcl_DStringFree(&proc_internal_def);
if (tcl_rc != TCL_OK)
{
free(prodesc->proname);
free(prodesc);
elog(ERROR, "plperl: cannot create internal procedure %s - %s",
internal_proname, plperl_safe_interp->result);
}
/************************************************************
* Add the proc description block to the hashtable
************************************************************/
hashent = Tcl_CreateHashEntry(plperl_proc_hash,
prodesc->proname, &hashnew);
Tcl_SetHashValue(hashent, (ClientData) prodesc);
}
else
{
/************************************************************
* Found the proc description block in the hashtable
************************************************************/
prodesc = (plperl_proc_desc *) Tcl_GetHashValue(hashent);
}
tupdesc = trigdata->tg_relation->rd_att;
/************************************************************
* Create the tcl command to call the internal
* proc in the safe interpreter
************************************************************/
Tcl_DStringInit(&tcl_cmd);
Tcl_DStringInit(&tcl_trigtup);
Tcl_DStringInit(&tcl_newtup);
/************************************************************
* We call external functions below - care for elog(ERROR)
************************************************************/
memcpy(&save_restart, &Warn_restart, sizeof(save_restart));
if (sigsetjmp(Warn_restart, 1) != 0)
{
memcpy(&Warn_restart, &save_restart, sizeof(Warn_restart));
Tcl_DStringFree(&tcl_cmd);
Tcl_DStringFree(&tcl_trigtup);
Tcl_DStringFree(&tcl_newtup);
plperl_restart_in_progress = 1;
if (--plperl_call_level == 0)
plperl_restart_in_progress = 0;
siglongjmp(Warn_restart, 1);
}
/* The procedure name */
Tcl_DStringAppendElement(&tcl_cmd, internal_proname);
/* The trigger name for argument TG_name */
Tcl_DStringAppendElement(&tcl_cmd, trigdata->tg_trigger->tgname);
/* The oid of the trigger relation for argument TG_relid */
stroid = DatumGetCString(DirectFunctionCall1(oidout,
ObjectIdGetDatum(trigdata->tg_relation->rd_id)));
Tcl_DStringAppendElement(&tcl_cmd, stroid);
pfree(stroid);
/* A list of attribute names for argument TG_relatts */
Tcl_DStringAppendElement(&tcl_trigtup, "");
for (i = 0; i < tupdesc->natts; i++)
Tcl_DStringAppendElement(&tcl_trigtup,
tupdesc->attrs[i]->attname.data);
Tcl_DStringAppendElement(&tcl_cmd, Tcl_DStringValue(&tcl_trigtup));
Tcl_DStringFree(&tcl_trigtup);
Tcl_DStringInit(&tcl_trigtup);
/* The when part of the event for TG_when */
if (TRIGGER_FIRED_BEFORE(trigdata->tg_event))
Tcl_DStringAppendElement(&tcl_cmd, "BEFORE");
else if (TRIGGER_FIRED_AFTER(trigdata->tg_event))
Tcl_DStringAppendElement(&tcl_cmd, "AFTER");
else
Tcl_DStringAppendElement(&tcl_cmd, "UNKNOWN");
/* The level part of the event for TG_level */
if (TRIGGER_FIRED_FOR_ROW(trigdata->tg_event))
Tcl_DStringAppendElement(&tcl_cmd, "ROW");
else if (TRIGGER_FIRED_FOR_STATEMENT(trigdata->tg_event))
Tcl_DStringAppendElement(&tcl_cmd, "STATEMENT");
else
Tcl_DStringAppendElement(&tcl_cmd, "UNKNOWN");
/* Build the data list for the trigtuple */
plperl_build_tuple_argument(trigdata->tg_trigtuple,
tupdesc, &tcl_trigtup);
/*
* Now the command part of the event for TG_op and data for NEW and
* OLD
*/
if (TRIGGER_FIRED_BY_INSERT(trigdata->tg_event))
{
Tcl_DStringAppendElement(&tcl_cmd, "INSERT");
Tcl_DStringAppendElement(&tcl_cmd, Tcl_DStringValue(&tcl_trigtup));
Tcl_DStringAppendElement(&tcl_cmd, "");
rettup = trigdata->tg_trigtuple;
}
else if (TRIGGER_FIRED_BY_DELETE(trigdata->tg_event))
{
Tcl_DStringAppendElement(&tcl_cmd, "DELETE");
Tcl_DStringAppendElement(&tcl_cmd, "");
Tcl_DStringAppendElement(&tcl_cmd, Tcl_DStringValue(&tcl_trigtup));
rettup = trigdata->tg_trigtuple;
}
else if (TRIGGER_FIRED_BY_UPDATE(trigdata->tg_event))
{
Tcl_DStringAppendElement(&tcl_cmd, "UPDATE");
plperl_build_tuple_argument(trigdata->tg_newtuple,
tupdesc,
&tcl_newtup);
Tcl_DStringAppendElement(&tcl_cmd, Tcl_DStringValue(&tcl_newtup));
Tcl_DStringAppendElement(&tcl_cmd, Tcl_DStringValue(&tcl_trigtup));
rettup = trigdata->tg_newtuple;
}
else
{
Tcl_DStringAppendElement(&tcl_cmd, "UNKNOWN");
Tcl_DStringAppendElement(&tcl_cmd, Tcl_DStringValue(&tcl_trigtup));
Tcl_DStringAppendElement(&tcl_cmd, Tcl_DStringValue(&tcl_trigtup));
rettup = trigdata->tg_trigtuple;
}
memcpy(&Warn_restart, &save_restart, sizeof(Warn_restart));
Tcl_DStringFree(&tcl_trigtup);
Tcl_DStringFree(&tcl_newtup);
/************************************************************
* Finally append the arguments from CREATE TRIGGER
************************************************************/
for (i = 0; i < trigdata->tg_trigger->tgnargs; i++)
Tcl_DStringAppendElement(&tcl_cmd, trigdata->tg_trigger->tgargs[i]);
/************************************************************
* Call the Tcl function
************************************************************/
tcl_rc = Tcl_GlobalEval(plperl_safe_interp, Tcl_DStringValue(&tcl_cmd));
Tcl_DStringFree(&tcl_cmd);
/************************************************************
* Check the return code from Tcl and handle
* our special restart mechanism to get rid
* of all nested call levels on transaction
* abort.
************************************************************/
if (tcl_rc == TCL_ERROR || plperl_restart_in_progress)
{
if (!plperl_restart_in_progress)
{
plperl_restart_in_progress = 1;
if (--plperl_call_level == 0)
plperl_restart_in_progress = 0;
elog(ERROR, "plperl: %s", plperl_safe_interp->result);
}
if (--plperl_call_level == 0)
plperl_restart_in_progress = 0;
siglongjmp(Warn_restart, 1);
}
switch (tcl_rc)
{
case TCL_OK:
break;
default:
elog(ERROR, "plperl: unsupported TCL return code %d", tcl_rc);
}
/************************************************************
* The return value from the procedure might be one of
* the magic strings OK or SKIP or a list from array get
************************************************************/
if (SPI_finish() != SPI_OK_FINISH)
elog(ERROR, "plperl: SPI_finish() failed");
if (strcmp(plperl_safe_interp->result, "OK") == 0)
return rettup;
if (strcmp(plperl_safe_interp->result, "SKIP") == 0)
{
return (HeapTuple) NULL;;
}
/************************************************************
* Convert the result value from the safe interpreter
* and setup structures for SPI_modifytuple();
************************************************************/
if (Tcl_SplitList(plperl_safe_interp, plperl_safe_interp->result,
&ret_numvals, &ret_values) != TCL_OK)
{
elog(NOTICE, "plperl: cannot split return value from trigger");
elog(ERROR, "plperl: %s", plperl_safe_interp->result);
}
if (ret_numvals % 2 != 0)
{
ckfree(ret_values);
elog(ERROR, "plperl: invalid return list from trigger - must have even
# of elements");
}
modattrs = (int *) palloc(tupdesc->natts * sizeof(int));
modvalues = (Datum *) palloc(tupdesc->natts * sizeof(Datum));
for (i = 0; i < tupdesc->natts; i++)
{
modattrs[i] = i + 1;
modvalues[i] = (Datum) NULL;
}
modnulls = palloc(tupdesc->natts + 1);
memset(modnulls, 'n', tupdesc->natts);
modnulls[tupdesc->natts] = '\0';
/************************************************************
* Care for possible elog(ERROR)'s below
************************************************************/
if (sigsetjmp(Warn_restart, 1) != 0)
{
memcpy(&Warn_restart, &save_restart, sizeof(Warn_restart));
ckfree(ret_values);
plperl_restart_in_progress = 1;
if (--plperl_call_level == 0)
plperl_restart_in_progress = 0;
siglongjmp(Warn_restart, 1);
}
i = 0;
while (i < ret_numvals)
{
int attnum;
HeapTuple typeTup;
Oid typinput;
Oid typelem;
FmgrInfo finfo;
/************************************************************
* Ignore pseudo elements with a dot name
************************************************************/
if (*(ret_values[i]) == '.')
{
i += 2;
continue;
}
/************************************************************
* Get the attribute number
************************************************************/
attnum = SPI_fnumber(tupdesc, ret_values[i++]);
if (attnum == SPI_ERROR_NOATTRIBUTE)
elog(ERROR, "plperl: invalid attribute '%s'", ret_values[--i]);
/************************************************************
* Lookup the attribute type in the syscache
* for the input function
************************************************************/
typeTup = SearchSysCacheTuple(TYPEOID,
ObjectIdGetDatum(tupdesc->attrs[attnum -
1]->atttypid),
0, 0, 0);
if (!HeapTupleIsValid(typeTup))
{
elog(ERROR, "plperl: Cache lookup for attribute '%s' type %u
failed",
ret_values[--i],
tupdesc->attrs[attnum - 1]->atttypid);
}
typinput = (Oid) (((Form_pg_type) GETSTRUCT(typeTup))->typinput);
typelem = (Oid) (((Form_pg_type) GETSTRUCT(typeTup))->typelem);
/************************************************************
* Set the attribute to NOT NULL and convert the contents
************************************************************/
modnulls[attnum - 1] = ' ';
fmgr_info(typinput, &finfo);
modvalues[attnum - 1] =
FunctionCall3(&finfo,
CStringGetDatum(ret_values[i++]),
ObjectIdGetDatum(typelem),
Int32GetDatum(tupdesc->attrs[attnum-1]->atttypmod));
}
rettup = SPI_modifytuple(trigdata->tg_relation, rettup, tupdesc->natts,
modattrs, modvalues,
modnulls);
pfree(modattrs);
pfree(modvalues);
pfree(modnulls);
if (rettup == NULL)
elog(ERROR, "plperl: SPI_modifytuple() failed - RC = %d\n",
SPI_result);
ckfree(ret_values);
memcpy(&Warn_restart, &save_restart, sizeof(Warn_restart));
return rettup;
}
/**********************************************************************
* plperl_elog() - elog() support for PLTcl
**********************************************************************/
static int
plperl_elog(ClientData cdata, Tcl_Interp *interp,
int argc, char *argv[])
{
int level;
sigjmp_buf save_restart;
/************************************************************
* Suppress messages during the restart process
************************************************************/
if (plperl_restart_in_progress)
return TCL_ERROR;
/************************************************************
* Catch the restart longjmp and begin a controlled
* return though all interpreter levels if it happens
************************************************************/
memcpy(&save_restart, &Warn_restart, sizeof(save_restart));
if (sigsetjmp(Warn_restart, 1) != 0)
{
memcpy(&Warn_restart, &save_restart, sizeof(Warn_restart));
plperl_restart_in_progress = 1;
return TCL_ERROR;
}
if (argc != 3)
{
Tcl_SetResult(interp, "syntax error - 'elog level msg'",
TCL_VOLATILE);
return TCL_ERROR;
}
if (strcmp(argv[1], "NOTICE") == 0)
level = NOTICE;
else if (strcmp(argv[1], "WARN") == 0)
level = ERROR;
else if (strcmp(argv[1], "ERROR") == 0)
level = ERROR;
else if (strcmp(argv[1], "FATAL") == 0)
level = FATAL;
else if (strcmp(argv[1], "DEBUG") == 0)
level = DEBUG;
else if (strcmp(argv[1], "NOIND") == 0)
level = NOIND;
else
{
Tcl_AppendResult(interp, "Unknown elog level '", argv[1],
"'", NULL);
memcpy(&Warn_restart, &save_restart, sizeof(Warn_restart));
return TCL_ERROR;
}
/************************************************************
* Call elog(), restore the original restart address
* and return to the caller (if not catched)
************************************************************/
elog(level, argv[2]);
memcpy(&Warn_restart, &save_restart, sizeof(Warn_restart));
return TCL_OK;
}
/**********************************************************************
* plperl_quote() - quote literal strings that are to
* be used in SPI_exec query strings
**********************************************************************/
static int
plperl_quote(ClientData cdata, Tcl_Interp *interp,
int argc, char *argv[])
{
char *tmp;
char *cp1;
char *cp2;
/************************************************************
* Check call syntax
************************************************************/
if (argc != 2)
{
Tcl_SetResult(interp, "syntax error - 'quote string'", TCL_VOLATILE);
return TCL_ERROR;
}
/************************************************************
* Allocate space for the maximum the string can
* grow to and initialize pointers
************************************************************/
tmp = palloc(strlen(argv[1]) * 2 + 1);
cp1 = argv[1];
cp2 = tmp;
/************************************************************
* Walk through string and double every quote and backslash
************************************************************/
while (*cp1)
{
if (*cp1 == '\'')
*cp2++ = '\'';
else
{
if (*cp1 == '\\')
*cp2++ = '\\';
}
*cp2++ = *cp1++;
}
/************************************************************
* Terminate the string and set it as result
************************************************************/
*cp2 = '\0';
Tcl_SetResult(interp, tmp, TCL_VOLATILE);
pfree(tmp);
return TCL_OK;
}
/**********************************************************************
* plperl_SPI_exec() - The builtin SPI_exec command
* for the safe interpreter
**********************************************************************/
static int
plperl_SPI_exec(ClientData cdata, Tcl_Interp *interp,
int argc, char *argv[])
{
int spi_rc;
char buf[64];
int count = 0;
char *arrayname = NULL;
int query_idx;
int i;
int loop_rc;
int ntuples;
HeapTuple *tuples;
TupleDesc tupdesc = NULL;
sigjmp_buf save_restart;
char *usage = "syntax error - 'SPI_exec "
"?-count n? "
"?-array name? query ?loop body?";
/************************************************************
* Don't do anything if we are already in restart mode
************************************************************/
if (plperl_restart_in_progress)
return TCL_ERROR;
/************************************************************
* Check the call syntax and get the count option
************************************************************/
if (argc < 2)
{
Tcl_SetResult(interp, usage, TCL_VOLATILE);
return TCL_ERROR;
}
i = 1;
while (i < argc)
{
if (strcmp(argv[i], "-array") == 0)
{
if (++i >= argc)
{
Tcl_SetResult(interp, usage, TCL_VOLATILE);
return TCL_ERROR;
}
arrayname = argv[i++];
continue;
}
if (strcmp(argv[i], "-count") == 0)
{
if (++i >= argc)
{
Tcl_SetResult(interp, usage, TCL_VOLATILE);
return TCL_ERROR;
}
if (Tcl_GetInt(interp, argv[i++], &count) != TCL_OK)
return TCL_ERROR;
continue;
}
break;
}
query_idx = i;
if (query_idx >= argc)
{
Tcl_SetResult(interp, usage, TCL_VOLATILE);
return TCL_ERROR;
}
/************************************************************
* Prepare to start a controlled return through all
* interpreter levels on transaction abort
************************************************************/
memcpy(&save_restart, &Warn_restart, sizeof(save_restart));
if (sigsetjmp(Warn_restart, 1) != 0)
{
memcpy(&Warn_restart, &save_restart, sizeof(Warn_restart));
plperl_restart_in_progress = 1;
Tcl_SetResult(interp, "Transaction abort", TCL_VOLATILE);
return TCL_ERROR;
}
/************************************************************
* Execute the query and handle return codes
************************************************************/
spi_rc = SPI_exec(argv[query_idx], count);
memcpy(&Warn_restart, &save_restart, sizeof(Warn_restart));
switch (spi_rc)
{
case SPI_OK_UTILITY:
Tcl_SetResult(interp, "0", TCL_VOLATILE);
return TCL_OK;
case SPI_OK_SELINTO:
case SPI_OK_INSERT:
case SPI_OK_DELETE:
case SPI_OK_UPDATE:
sprintf(buf, "%d", SPI_processed);
Tcl_SetResult(interp, buf, TCL_VOLATILE);
return TCL_OK;
case SPI_OK_SELECT:
break;
case SPI_ERROR_ARGUMENT:
Tcl_SetResult(interp,
"plperl: SPI_exec() failed -
SPI_ERROR_ARGUMENT",
TCL_VOLATILE);
return TCL_ERROR;
case SPI_ERROR_UNCONNECTED:
Tcl_SetResult(interp,
"plperl: SPI_exec() failed -
SPI_ERROR_UNCONNECTED",
TCL_VOLATILE);
return TCL_ERROR;
case SPI_ERROR_COPY:
Tcl_SetResult(interp,
"plperl: SPI_exec() failed -
SPI_ERROR_COPY",
TCL_VOLATILE);
return TCL_ERROR;
case SPI_ERROR_CURSOR:
Tcl_SetResult(interp,
"plperl: SPI_exec() failed -
SPI_ERROR_CURSOR",
TCL_VOLATILE);
return TCL_ERROR;
case SPI_ERROR_TRANSACTION:
Tcl_SetResult(interp,
"plperl: SPI_exec() failed -
SPI_ERROR_TRANSACTION",
TCL_VOLATILE);
return TCL_ERROR;
case SPI_ERROR_OPUNKNOWN:
Tcl_SetResult(interp,
"plperl: SPI_exec() failed -
SPI_ERROR_OPUNKNOWN",
TCL_VOLATILE);
return TCL_ERROR;
default:
sprintf(buf, "%d", spi_rc);
Tcl_AppendResult(interp, "plperl: SPI_exec() failed - ",
"unknown RC ", buf, NULL);
return TCL_ERROR;
}
/************************************************************
* Only SELECT queries fall through to here - remember the
* tuples we got
************************************************************/
ntuples = SPI_processed;
if (ntuples > 0)
{
tuples = SPI_tuptable->vals;
tupdesc = SPI_tuptable->tupdesc;
}
/************************************************************
* Again prepare for elog(ERROR)
************************************************************/
if (sigsetjmp(Warn_restart, 1) != 0)
{
memcpy(&Warn_restart, &save_restart, sizeof(Warn_restart));
plperl_restart_in_progress = 1;
Tcl_SetResult(interp, "Transaction abort", TCL_VOLATILE);
return TCL_ERROR;
}
/************************************************************
* If there is no loop body given, just set the variables
* from the first tuple (if any) and return the number of
* tuples selected
************************************************************/
if (argc == query_idx + 1)
{
if (ntuples > 0)
plperl_set_tuple_values(interp, arrayname, 0, tuples[0],
tupdesc);
sprintf(buf, "%d", ntuples);
Tcl_SetResult(interp, buf, TCL_VOLATILE);
memcpy(&Warn_restart, &save_restart, sizeof(Warn_restart));
return TCL_OK;
}
/************************************************************
* There is a loop body - process all tuples and evaluate
* the body on each
************************************************************/
query_idx++;
for (i = 0; i < ntuples; i++)
{
plperl_set_tuple_values(interp, arrayname, i, tuples[i], tupdesc);
loop_rc = Tcl_Eval(interp, argv[query_idx]);
if (loop_rc == TCL_OK)
continue;
if (loop_rc == TCL_CONTINUE)
continue;
if (loop_rc == TCL_RETURN)
{
memcpy(&Warn_restart, &save_restart, sizeof(Warn_restart));
return TCL_RETURN;
}
if (loop_rc == TCL_BREAK)
break;
memcpy(&Warn_restart, &save_restart, sizeof(Warn_restart));
return TCL_ERROR;
}
/************************************************************
* Finally return the number of tuples
************************************************************/
memcpy(&Warn_restart, &save_restart, sizeof(Warn_restart));
sprintf(buf, "%d", ntuples);
Tcl_SetResult(interp, buf, TCL_VOLATILE);
return TCL_OK;
}
/**********************************************************************
* plperl_SPI_prepare() - Builtin support for prepared plans
* The Tcl command SPI_prepare
* allways saves the plan using
* SPI_saveplan and returns a key for
* access. There is no chance to prepare
* and not save the plan currently.
**********************************************************************/
static int
plperl_SPI_prepare(ClientData cdata, Tcl_Interp *interp,
int argc, char *argv[])
{
int nargs;
char **args;
plperl_query_desc *qdesc;
void *plan;
int i;
HeapTuple typeTup;
Tcl_HashEntry *hashent;
int hashnew;
sigjmp_buf save_restart;
/************************************************************
* Don't do anything if we are already in restart mode
************************************************************/
if (plperl_restart_in_progress)
return TCL_ERROR;
/************************************************************
* Check the call syntax
************************************************************/
if (argc != 3)
{
Tcl_SetResult(interp, "syntax error - 'SPI_prepare query argtypes'",
TCL_VOLATILE);
return TCL_ERROR;
}
/************************************************************
* Split the argument type list
************************************************************/
if (Tcl_SplitList(interp, argv[2], &nargs, &args) != TCL_OK)
return TCL_ERROR;
/************************************************************
* Allocate the new querydesc structure
************************************************************/
qdesc = (plperl_query_desc *) malloc(sizeof(plperl_query_desc));
sprintf(qdesc->qname, "%lx", (long) qdesc);
qdesc->nargs = nargs;
qdesc->argtypes = (Oid *) malloc(nargs * sizeof(Oid));
qdesc->arginfuncs = (FmgrInfo *) malloc(nargs * sizeof(FmgrInfo));
qdesc->argtypelems = (Oid *) malloc(nargs * sizeof(Oid));
qdesc->argvalues = (Datum *) malloc(nargs * sizeof(Datum));
qdesc->arglen = (int *) malloc(nargs * sizeof(int));
/************************************************************
* Prepare to start a controlled return through all
* interpreter levels on transaction abort
************************************************************/
memcpy(&save_restart, &Warn_restart, sizeof(save_restart));
if (sigsetjmp(Warn_restart, 1) != 0)
{
memcpy(&Warn_restart, &save_restart, sizeof(Warn_restart));
plperl_restart_in_progress = 1;
free(qdesc->argtypes);
free(qdesc->arginfuncs);
free(qdesc->argtypelems);
free(qdesc->argvalues);
free(qdesc->arglen);
free(qdesc);
ckfree(args);
return TCL_ERROR;
}
/************************************************************
* Lookup the argument types by name in the system cache
* and remember the required information for input conversion
************************************************************/
for (i = 0; i < nargs; i++)
{
typeTup = SearchSysCacheTuple(TYPNAME,
PointerGetDatum(args[i]),
0, 0, 0);
if (!HeapTupleIsValid(typeTup))
elog(ERROR, "plperl: Cache lookup of type %s failed", args[i]);
qdesc->argtypes[i] = typeTup->t_data->t_oid;
fmgr_info(((Form_pg_type) GETSTRUCT(typeTup))->typinput,
&(qdesc->arginfuncs[i]));
qdesc->argtypelems[i] = ((Form_pg_type) GETSTRUCT(typeTup))->typelem;
qdesc->argvalues[i] = (Datum) NULL;
qdesc->arglen[i] = (int) (((Form_pg_type) GETSTRUCT(typeTup))->typlen);
}
/************************************************************
* Prepare the plan and check for errors
************************************************************/
plan = SPI_prepare(argv[1], nargs, qdesc->argtypes);
if (plan == NULL)
{
char buf[128];
char *reason;
memcpy(&Warn_restart, &save_restart, sizeof(Warn_restart));
switch (SPI_result)
{
case SPI_ERROR_ARGUMENT:
reason = "SPI_ERROR_ARGUMENT";
break;
case SPI_ERROR_UNCONNECTED:
reason = "SPI_ERROR_UNCONNECTED";
break;
case SPI_ERROR_COPY:
reason = "SPI_ERROR_COPY";
break;
case SPI_ERROR_CURSOR:
reason = "SPI_ERROR_CURSOR";
break;
case SPI_ERROR_TRANSACTION:
reason = "SPI_ERROR_TRANSACTION";
break;
case SPI_ERROR_OPUNKNOWN:
reason = "SPI_ERROR_OPUNKNOWN";
break;
default:
sprintf(buf, "unknown RC %d", SPI_result);
reason = buf;
break;
}
elog(ERROR, "plperl: SPI_prepare() failed - %s", reason);
}
/************************************************************
* Save the plan
************************************************************/
qdesc->plan = SPI_saveplan(plan);
if (qdesc->plan == NULL)
{
char buf[128];
char *reason;
memcpy(&Warn_restart, &save_restart, sizeof(Warn_restart));
switch (SPI_result)
{
case SPI_ERROR_ARGUMENT:
reason = "SPI_ERROR_ARGUMENT";
break;
case SPI_ERROR_UNCONNECTED:
reason = "SPI_ERROR_UNCONNECTED";
break;
default:
sprintf(buf, "unknown RC %d", SPI_result);
reason = buf;
break;
}
elog(ERROR, "plperl: SPI_saveplan() failed - %s", reason);
}
/************************************************************
* Insert a hashtable entry for the plan and return
* the key to the caller
************************************************************/
memcpy(&Warn_restart, &save_restart, sizeof(Warn_restart));
hashent = Tcl_CreateHashEntry(plperl_query_hash, qdesc->qname, &hashnew);
Tcl_SetHashValue(hashent, (ClientData) qdesc);
Tcl_SetResult(interp, qdesc->qname, TCL_VOLATILE);
return TCL_OK;
}
/**********************************************************************
* plperl_SPI_execp() - Execute a prepared plan
**********************************************************************/
static int
plperl_SPI_execp(ClientData cdata, Tcl_Interp *interp,
int argc, char *argv[])
{
int spi_rc;
char buf[64];
int i,
j;
int loop_body;
Tcl_HashEntry *hashent;
plperl_query_desc *qdesc;
char *nulls = NULL;
char *arrayname = NULL;
int count = 0;
int callnargs;
static char **callargs = NULL;
int loop_rc;
int ntuples;
HeapTuple *tuples = NULL;
TupleDesc tupdesc = NULL;
sigjmp_buf save_restart;
char *usage = "syntax error - 'SPI_execp "
"?-nulls string? ?-count n? "
"?-array name? query ?args? ?loop body?";
/************************************************************
* Tidy up from an earlier abort
************************************************************/
if (callargs != NULL)
{
ckfree(callargs);
callargs = NULL;
}
/************************************************************
* Don't do anything if we are already in restart mode
************************************************************/
if (plperl_restart_in_progress)
return TCL_ERROR;
/************************************************************
* Get the options and check syntax
************************************************************/
i = 1;
while (i < argc)
{
if (strcmp(argv[i], "-array") == 0)
{
if (++i >= argc)
{
Tcl_SetResult(interp, usage, TCL_VOLATILE);
return TCL_ERROR;
}
arrayname = argv[i++];
continue;
}
if (strcmp(argv[i], "-nulls") == 0)
{
if (++i >= argc)
{
Tcl_SetResult(interp, usage, TCL_VOLATILE);
return TCL_ERROR;
}
nulls = argv[i++];
continue;
}
if (strcmp(argv[i], "-count") == 0)
{
if (++i >= argc)
{
Tcl_SetResult(interp, usage, TCL_VOLATILE);
return TCL_ERROR;
}
if (Tcl_GetInt(interp, argv[i++], &count) != TCL_OK)
return TCL_ERROR;
continue;
}
break;
}
/************************************************************
* Check minimum call arguments
************************************************************/
if (i >= argc)
{
Tcl_SetResult(interp, usage, TCL_VOLATILE);
return TCL_ERROR;
}
/************************************************************
* Get the prepared plan descriptor by it's key
************************************************************/
hashent = Tcl_FindHashEntry(plperl_query_hash, argv[i++]);
if (hashent == NULL)
{
Tcl_AppendResult(interp, "invalid queryid '", argv[--i], "'", NULL);
return TCL_ERROR;
}
qdesc = (plperl_query_desc *) Tcl_GetHashValue(hashent);
/************************************************************
* If a nulls string is given, check for correct length
************************************************************/
if (nulls != NULL)
{
if (strlen(nulls) != qdesc->nargs)
{
Tcl_SetResult(interp,
"length of nulls string doesn't match # of
arguments",
TCL_VOLATILE);
return TCL_ERROR;
}
}
/************************************************************
* If there was a argtype list on preparation, we need
* an argument value list now
************************************************************/
if (qdesc->nargs > 0)
{
if (i >= argc)
{
Tcl_SetResult(interp, "missing argument list", TCL_VOLATILE);
return TCL_ERROR;
}
/************************************************************
* Split the argument values
************************************************************/
if (Tcl_SplitList(interp, argv[i++], &callnargs, &callargs) != TCL_OK)
return TCL_ERROR;
/************************************************************
* Check that the # of arguments matches
************************************************************/
if (callnargs != qdesc->nargs)
{
Tcl_SetResult(interp,
"argument list length doesn't match # of arguments for query",
TCL_VOLATILE);
if (callargs != NULL)
{
ckfree(callargs);
callargs = NULL;
}
return TCL_ERROR;
}
/************************************************************
* Prepare to start a controlled return through all
* interpreter levels on transaction abort during the
* parse of the arguments
************************************************************/
memcpy(&save_restart, &Warn_restart, sizeof(save_restart));
if (sigsetjmp(Warn_restart, 1) != 0)
{
memcpy(&Warn_restart, &save_restart, sizeof(Warn_restart));
for (j = 0; j < callnargs; j++)
{
if (qdesc->arglen[j] < 0 &&
qdesc->argvalues[j] != (Datum) NULL)
{
pfree((char *) (qdesc->argvalues[j]));
qdesc->argvalues[j] = (Datum) NULL;
}
}
ckfree(callargs);
callargs = NULL;
plperl_restart_in_progress = 1;
Tcl_SetResult(interp, "Transaction abort", TCL_VOLATILE);
return TCL_ERROR;
}
/************************************************************
* Setup the value array for the SPI_execp() using
* the type specific input functions
************************************************************/
for (j = 0; j < callnargs; j++)
{
qdesc->argvalues[j] =
FunctionCall3(&qdesc->arginfuncs[j],
CStringGetDatum(callargs[j]),
ObjectIdGetDatum(qdesc->argtypelems[j]),
Int32GetDatum(qdesc->arglen[j]));
}
/************************************************************
* Free the splitted argument value list
************************************************************/
memcpy(&Warn_restart, &save_restart, sizeof(Warn_restart));
ckfree(callargs);
callargs = NULL;
}
else
callnargs = 0;
/************************************************************
* Remember the index of the last processed call
* argument - a loop body for SELECT might follow
************************************************************/
loop_body = i;
/************************************************************
* Prepare to start a controlled return through all
* interpreter levels on transaction abort
************************************************************/
memcpy(&save_restart, &Warn_restart, sizeof(save_restart));
if (sigsetjmp(Warn_restart, 1) != 0)
{
memcpy(&Warn_restart, &save_restart, sizeof(Warn_restart));
for (j = 0; j < callnargs; j++)
{
if (qdesc->arglen[j] < 0 && qdesc->argvalues[j] != (Datum)
NULL)
{
pfree((char *) (qdesc->argvalues[j]));
qdesc->argvalues[j] = (Datum) NULL;
}
}
plperl_restart_in_progress = 1;
Tcl_SetResult(interp, "Transaction abort", TCL_VOLATILE);
return TCL_ERROR;
}
/************************************************************
* Execute the plan
************************************************************/
spi_rc = SPI_execp(qdesc->plan, qdesc->argvalues, nulls, count);
memcpy(&Warn_restart, &save_restart, sizeof(Warn_restart));
/************************************************************
* For varlena data types, free the argument values
************************************************************/
for (j = 0; j < callnargs; j++)
{
if (qdesc->arglen[j] < 0 && qdesc->argvalues[j] != (Datum) NULL)
{
pfree((char *) (qdesc->argvalues[j]));
qdesc->argvalues[j] = (Datum) NULL;
}
}
/************************************************************
* Check the return code from SPI_execp()
************************************************************/
switch (spi_rc)
{
case SPI_OK_UTILITY:
Tcl_SetResult(interp, "0", TCL_VOLATILE);
return TCL_OK;
case SPI_OK_SELINTO:
case SPI_OK_INSERT:
case SPI_OK_DELETE:
case SPI_OK_UPDATE:
sprintf(buf, "%d", SPI_processed);
Tcl_SetResult(interp, buf, TCL_VOLATILE);
return TCL_OK;
case SPI_OK_SELECT:
break;
case SPI_ERROR_ARGUMENT:
Tcl_SetResult(interp,
"plperl: SPI_exec() failed -
SPI_ERROR_ARGUMENT",
TCL_VOLATILE);
return TCL_ERROR;
case SPI_ERROR_UNCONNECTED:
Tcl_SetResult(interp,
"plperl: SPI_exec() failed -
SPI_ERROR_UNCONNECTED",
TCL_VOLATILE);
return TCL_ERROR;
case SPI_ERROR_COPY:
Tcl_SetResult(interp,
"plperl: SPI_exec() failed -
SPI_ERROR_COPY",
TCL_VOLATILE);
return TCL_ERROR;
case SPI_ERROR_CURSOR:
Tcl_SetResult(interp,
"plperl: SPI_exec() failed -
SPI_ERROR_CURSOR",
TCL_VOLATILE);
return TCL_ERROR;
case SPI_ERROR_TRANSACTION:
Tcl_SetResult(interp,
"plperl: SPI_exec() failed -
SPI_ERROR_TRANSACTION",
TCL_VOLATILE);
return TCL_ERROR;
case SPI_ERROR_OPUNKNOWN:
Tcl_SetResult(interp,
"plperl: SPI_exec() failed -
SPI_ERROR_OPUNKNOWN",
TCL_VOLATILE);
return TCL_ERROR;
default:
sprintf(buf, "%d", spi_rc);
Tcl_AppendResult(interp, "plperl: SPI_exec() failed - ",
"unknown RC ", buf, NULL);
return TCL_ERROR;
}
/************************************************************
* Only SELECT queries fall through to here - remember the
* tuples we got
************************************************************/
ntuples = SPI_processed;
if (ntuples > 0)
{
tuples = SPI_tuptable->vals;
tupdesc = SPI_tuptable->tupdesc;
}
/************************************************************
* Prepare to start a controlled return through all
* interpreter levels on transaction abort during
* the ouput conversions of the results
************************************************************/
memcpy(&save_restart, &Warn_restart, sizeof(save_restart));
if (sigsetjmp(Warn_restart, 1) != 0)
{
memcpy(&Warn_restart, &save_restart, sizeof(Warn_restart));
plperl_restart_in_progress = 1;
Tcl_SetResult(interp, "Transaction abort", TCL_VOLATILE);
return TCL_ERROR;
}
/************************************************************
* If there is no loop body given, just set the variables
* from the first tuple (if any) and return the number of
* tuples selected
************************************************************/
if (loop_body >= argc)
{
if (ntuples > 0)
plperl_set_tuple_values(interp, arrayname, 0, tuples[0],
tupdesc);
memcpy(&Warn_restart, &save_restart, sizeof(Warn_restart));
sprintf(buf, "%d", ntuples);
Tcl_SetResult(interp, buf, TCL_VOLATILE);
return TCL_OK;
}
/************************************************************
* There is a loop body - process all tuples and evaluate
* the body on each
************************************************************/
for (i = 0; i < ntuples; i++)
{
plperl_set_tuple_values(interp, arrayname, i, tuples[i], tupdesc);
loop_rc = Tcl_Eval(interp, argv[loop_body]);
if (loop_rc == TCL_OK)
continue;
if (loop_rc == TCL_CONTINUE)
continue;
if (loop_rc == TCL_RETURN)
{
memcpy(&Warn_restart, &save_restart, sizeof(Warn_restart));
return TCL_RETURN;
}
if (loop_rc == TCL_BREAK)
break;
memcpy(&Warn_restart, &save_restart, sizeof(Warn_restart));
return TCL_ERROR;
}
/************************************************************
* Finally return the number of tuples
************************************************************/
memcpy(&Warn_restart, &save_restart, sizeof(Warn_restart));
sprintf(buf, "%d", ntuples);
Tcl_SetResult(interp, buf, TCL_VOLATILE);
return TCL_OK;
}
/**********************************************************************
* plperl_set_tuple_values() - Set variables for all attributes
* of a given tuple
**********************************************************************/
static void
plperl_set_tuple_values(Tcl_Interp *interp, char *arrayname,
int tupno, HeapTuple tuple, TupleDesc
tupdesc)
{
int i;
char *outputstr;
char buf[64];
Datum attr;
bool isnull;
char *attname;
HeapTuple typeTup;
Oid typoutput;
Oid typelem;
char **arrptr;
char **nameptr;
char *nullname = NULL;
/************************************************************
* Prepare pointers for Tcl_SetVar2() below and in array
* mode set the .tupno element
************************************************************/
if (arrayname == NULL)
{
arrptr = &attname;
nameptr = &nullname;
}
else
{
arrptr = &arrayname;
nameptr = &attname;
sprintf(buf, "%d", tupno);
Tcl_SetVar2(interp, arrayname, ".tupno", buf, 0);
}
for (i = 0; i < tupdesc->natts; i++)
{
/************************************************************
* Get the attribute name
************************************************************/
attname = tupdesc->attrs[i]->attname.data;
/************************************************************
* Get the attributes value
************************************************************/
attr = heap_getattr(tuple, i + 1, tupdesc, &isnull);
/************************************************************
* Lookup the attribute type in the syscache
* for the output function
************************************************************/
typeTup = SearchSysCacheTuple(TYPEOID,
ObjectIdGetDatum(tupdesc->attrs[i]->atttypid),
0, 0, 0);
if (!HeapTupleIsValid(typeTup))
{
elog(ERROR, "plperl: Cache lookup for attribute '%s' type %u
failed",
attname, tupdesc->attrs[i]->atttypid);
}
typoutput = (Oid) (((Form_pg_type) GETSTRUCT(typeTup))->typoutput);
typelem = (Oid) (((Form_pg_type) GETSTRUCT(typeTup))->typelem);
/************************************************************
* If there is a value, set the variable
* If not, unset it
*
* Hmmm - Null attributes will cause functions to
* crash if they don't expect them - need something
* smarter here.
************************************************************/
if (!isnull && OidIsValid(typoutput))
{
outputstr = DatumGetCString(OidFunctionCall3(typoutput,
attr,
ObjectIdGetDatum(typelem),
Int32GetDatum(tupdesc->attrs[i]->attlen)));
Tcl_SetVar2(interp, *arrptr, *nameptr, outputstr, 0);
pfree(outputstr);
}
else
Tcl_UnsetVar2(interp, *arrptr, *nameptr, 0);
}
}
#endif
/**********************************************************************
* plperl_build_tuple_argument() - Build a string for a ref to a hash
* from all attributes of a given tuple
**********************************************************************/
static SV *
plperl_build_tuple_argument(HeapTuple tuple, TupleDesc tupdesc)
{
int i;
SV *output;
Datum attr;
bool isnull;
char *attname;
char *outputstr;
HeapTuple typeTup;
Oid typoutput;
Oid typelem;
output = sv_2mortal(newSVpv("{", 0));
for (i = 0; i < tupdesc->natts; i++)
{
/************************************************************
* Get the attribute name
************************************************************/
attname = tupdesc->attrs[i]->attname.data;
/************************************************************
* Get the attributes value
************************************************************/
attr = heap_getattr(tuple, i + 1, tupdesc, &isnull);
/************************************************************
* Lookup the attribute type in the syscache
* for the output function
************************************************************/
typeTup = SearchSysCacheTuple(TYPEOID,
ObjectIdGetDatum(tupdesc->attrs[i]->atttypid),
0, 0, 0);
if (!HeapTupleIsValid(typeTup))
{
elog(ERROR, "plperl: Cache lookup for attribute '%s' type %u
failed",
attname, tupdesc->attrs[i]->atttypid);
}
typoutput = (Oid) (((Form_pg_type) GETSTRUCT(typeTup))->typoutput);
typelem = (Oid) (((Form_pg_type) GETSTRUCT(typeTup))->typelem);
/************************************************************
* If there is a value, append the attribute name and the
* value to the list.
* If it is null it will be set to undef.
************************************************************/
if (!isnull && OidIsValid(typoutput))
{
outputstr = DatumGetCString(OidFunctionCall3(typoutput,
attr,
ObjectIdGetDatum(typelem),
Int32GetDatum(tupdesc->attrs[i]->attlen)));
sv_catpvf(output, "'%s' => '%s',", attname, outputstr);
pfree(outputstr);
}
else
sv_catpvf(output, "'%s' => undef,", attname);
}
sv_catpv(output, "}");
output = perl_eval_pv(SvPV_nolen(output), TRUE);
return output;
}
