On Mon, Apr 20, 2015 at 9:01 PM, Michael Paquier
<michael.paqu...@gmail.com> wrote:
> On Sun, Apr 19, 2015 at 10:01 PM, Michael Paquier
> <michael.paqu...@gmail.com> wrote:
>> Note as well that this patch uses the following patches fixing
>> independent issues:
>> ...
>
> Attached is v4. I added a switch in config.pl to be consistent with
> ./configure and --enable-tap-tests.
Attached is v5, rebased on HEAD (2c47fe16) after conflicts with
dcae5fac and 54a16df0.
--
Michael
From 9c348d985a3da0098be9d9f64a14e936068117a0 Mon Sep 17 00:00:00 2001
From: Michael Paquier <mich...@otacoo.com>
Date: Mon, 20 Apr 2015 04:57:37 -0700
Subject: [PATCH 1/2] Add support for TAP tests on Windows
Nodes initialized by the TAP tests use SSPI to securely perform the
tests, and test scripts are patched in a couple of places to support
Windows grammar. In the case of MSVC, tests can be run with this
command:
vcregress tapcheck
---
doc/src/sgml/install-windows.sgml | 1 +
src/Makefile.global.in | 2 +-
src/bin/initdb/t/001_initdb.pl | 18 ++++--
src/bin/pg_basebackup/t/010_pg_basebackup.pl | 79 ++++++++++++++++----------
src/bin/pg_controldata/t/001_pg_controldata.pl | 5 +-
src/bin/pg_ctl/t/001_start_stop.pl | 14 ++++-
src/bin/pg_ctl/t/002_status.pl | 12 +++-
src/bin/pg_rewind/RewindTest.pm | 56 ++++++++++++++----
src/bin/scripts/t/020_createdb.pl | 3 +
src/test/perl/TestLib.pm | 16 ++++--
src/tools/msvc/Solution.pm | 1 +
src/tools/msvc/config_default.pl | 1 +
src/tools/msvc/vcregress.pl | 48 +++++++++++++++-
13 files changed, 195 insertions(+), 61 deletions(-)
diff --git a/doc/src/sgml/install-windows.sgml b/doc/src/sgml/install-windows.sgml
index d154b44..2047790 100644
--- a/doc/src/sgml/install-windows.sgml
+++ b/doc/src/sgml/install-windows.sgml
@@ -439,6 +439,7 @@ $ENV{CONFIG}="Debug";
<userinput>vcregress modulescheck</userinput>
<userinput>vcregress ecpgcheck</userinput>
<userinput>vcregress isolationcheck</userinput>
+<userinput>vcregress tapcheck</userinput>
<userinput>vcregress upgradecheck</userinput>
</screen>
diff --git a/src/Makefile.global.in b/src/Makefile.global.in
index 81cae94..f030dac 100644
--- a/src/Makefile.global.in
+++ b/src/Makefile.global.in
@@ -338,7 +338,7 @@ cd $(srcdir) && TESTDIR='$(CURDIR)' PATH="$(bindir):$$PATH" PGPORT='6$(DEF_PGPOR
endef
define prove_check
-cd $(srcdir) && TESTDIR='$(CURDIR)' $(with_temp_install) PGPORT='6$(DEF_PGPORT)' top_builddir='$(CURDIR)/$(top_builddir)' $(PROVE) $(PG_PROVE_FLAGS) $(PROVE_FLAGS) t/*.pl
+cd $(srcdir) && TESTDIR='$(CURDIR)' TESTREGRESS='$(top_builddir)/src/test/regress/pg_regress' $(with_temp_install) PGPORT='6$(DEF_PGPORT)' $(PROVE) $(PG_PROVE_FLAGS) $(PROVE_FLAGS) t/*.pl
endef
else
diff --git a/src/bin/initdb/t/001_initdb.pl b/src/bin/initdb/t/001_initdb.pl
index d12be84..0865107 100644
--- a/src/bin/initdb/t/001_initdb.pl
+++ b/src/bin/initdb/t/001_initdb.pl
@@ -1,6 +1,8 @@
use strict;
use warnings;
+use Config;
use TestLib;
+use File::Path qw(rmtree);
use Test::More tests => 19;
my $tempdir = TestLib::tempdir;
@@ -18,27 +20,31 @@ command_fails([ 'initdb', '-S', "$tempdir/data3" ],
mkdir "$tempdir/data4" or BAIL_OUT($!);
command_ok([ 'initdb', "$tempdir/data4" ], 'existing empty data directory');
-system_or_bail "rm -rf '$tempdir'/*";
-
+rmtree($tempdir);
+mkdir $tempdir;
command_ok([ 'initdb', '-X', "$tempdir/pgxlog", "$tempdir/data" ],
'separate xlog directory');
-system_or_bail "rm -rf '$tempdir'/*";
+rmtree($tempdir);
+mkdir $tempdir;
command_fails(
[ 'initdb', "$tempdir/data", '-X', 'pgxlog' ],
'relative xlog directory not allowed');
-system_or_bail "rm -rf '$tempdir'/*";
+rmtree($tempdir);
+mkdir $tempdir;
mkdir "$tempdir/pgxlog";
command_ok([ 'initdb', '-X', "$tempdir/pgxlog", "$tempdir/data" ],
'existing empty xlog directory');
-system_or_bail "rm -rf '$tempdir'/*";
+rmtree($tempdir);
+mkdir $tempdir;
mkdir "$tempdir/pgxlog";
mkdir "$tempdir/pgxlog/lost+found";
command_fails([ 'initdb', '-X', "$tempdir/pgxlog", "$tempdir/data" ],
'existing nonempty xlog directory');
-system_or_bail "rm -rf '$tempdir'/*";
+rmtree($tempdir);
+mkdir $tempdir;
command_ok([ 'initdb', '-T', 'german', "$tempdir/data" ],
'select default dictionary');
diff --git a/src/bin/pg_basebackup/t/010_pg_basebackup.pl b/src/bin/pg_basebackup/t/010_pg_basebackup.pl
index 7e9a776..4cb1b5a 100644
--- a/src/bin/pg_basebackup/t/010_pg_basebackup.pl
+++ b/src/bin/pg_basebackup/t/010_pg_basebackup.pl
@@ -1,8 +1,9 @@
use strict;
use warnings;
use Cwd;
+use Config;
use TestLib;
-use Test::More tests => 35;
+use Test::More tests => ($Config{osname} eq "MSWin32") ? 26 : 35;
program_help_ok('pg_basebackup');
program_version_ok('pg_basebackup');
@@ -17,10 +18,20 @@ command_fails(
[ 'pg_basebackup', '-D', "$tempdir/backup" ],
'pg_basebackup fails because of hba');
+# Use SSPI on Windows, node has been initialized already accordingly
+# by pg_regress --config-auth.
open HBA, ">>$tempdir/pgdata/pg_hba.conf";
-print HBA "local replication all trust\n";
-print HBA "host replication all 127.0.0.1/32 trust\n";
-print HBA "host replication all ::1/128 trust\n";
+if ($Config{osname} ne "MSWin32")
+{
+ print HBA "local replication all trust\n";
+ print HBA "host replication all 127.0.0.1/32 trust\n";
+ print HBA "host replication all ::1/128 trust\n";
+}
+else
+{
+ print HBA "host replication all 127.0.0.1/32 sspi include_realm=1 map=regress\n";
+ print HBA "host replication all ::1/128 sspi include_realm=1 map=regress\n";
+}
close HBA;
system_or_bail 'pg_ctl', '-s', '-D', "$tempdir/pgdata", 'reload';
@@ -56,6 +67,39 @@ command_fails([ 'pg_basebackup', '-D', "$tempdir/tarbackup_l1", '-Ft' ],
'pg_basebackup tar with long name fails');
unlink "$tempdir/pgdata/$superlongname";
+command_fails(
+ [ 'pg_basebackup', '-D', "$tempdir/backup_foo", '-Fp', "-T=/foo" ],
+ '-T with empty old directory fails');
+command_fails(
+ [ 'pg_basebackup', '-D', "$tempdir/backup_foo", '-Fp', "-T/foo=" ],
+ '-T with empty new directory fails');
+command_fails(
+ [ 'pg_basebackup', '-D', "$tempdir/backup_foo", '-Fp',
+ "-T/foo=/bar=/baz" ],
+ '-T with multiple = fails');
+command_fails(
+ [ 'pg_basebackup', '-D', "$tempdir/backup_foo", '-Fp', "-Tfoo=/bar" ],
+ '-T with old directory not absolute fails');
+command_fails(
+ [ 'pg_basebackup', '-D', "$tempdir/backup_foo", '-Fp', "-T/foo=bar" ],
+ '-T with new directory not absolute fails');
+command_fails(
+ [ 'pg_basebackup', '-D', "$tempdir/backup_foo", '-Fp', "-Tfoo" ],
+ '-T with invalid format fails');
+
+mkdir "$tempdir/$superlongname";
+psql 'postgres', "CREATE TABLESPACE tblspc3 LOCATION '$tempdir/$superlongname';";
+command_fails([ 'pg_basebackup', '-D', "$tempdir/tarbackup_l3", '-Ft' ],
+ 'pg_basebackup tar with long symlink target fails');
+psql 'postgres', "DROP TABLESPACE tblspc3;";
+
+# Windows does not support symlink, which is what the rest of the tests
+# need, so simply leave.
+if ($Config{osname} eq "MSWin32")
+{
+ exit 0;
+}
+
# Create a temporary directory in the system location and symlink it
# to our physical temp location. That way we can use shorter names
# for the tablespace directories, which hopefully won't run afoul of
@@ -102,31 +146,4 @@ command_ok(
"-T$shorter_tempdir/tbl\\=spc2=$tempdir/tbackup/tbl\\=spc2" ],
'mapping tablespace with = sign in path');
ok(-d "$tempdir/tbackup/tbl=spc2", 'tablespace with = sign was relocated');
-
psql 'postgres', "DROP TABLESPACE tblspc2;";
-
-command_fails(
- [ 'pg_basebackup', '-D', "$tempdir/backup_foo", '-Fp', "-T=/foo" ],
- '-T with empty old directory fails');
-command_fails(
- [ 'pg_basebackup', '-D', "$tempdir/backup_foo", '-Fp', "-T/foo=" ],
- '-T with empty new directory fails');
-command_fails(
- [ 'pg_basebackup', '-D', "$tempdir/backup_foo", '-Fp',
- "-T/foo=/bar=/baz" ],
- '-T with multiple = fails');
-command_fails(
- [ 'pg_basebackup', '-D', "$tempdir/backup_foo", '-Fp', "-Tfoo=/bar" ],
- '-T with old directory not absolute fails');
-command_fails(
- [ 'pg_basebackup', '-D', "$tempdir/backup_foo", '-Fp', "-T/foo=bar" ],
- '-T with new directory not absolute fails');
-command_fails(
- [ 'pg_basebackup', '-D', "$tempdir/backup_foo", '-Fp', "-Tfoo" ],
- '-T with invalid format fails');
-
-mkdir "$tempdir/$superlongname";
-psql 'postgres', "CREATE TABLESPACE tblspc3 LOCATION '$tempdir/$superlongname';";
-command_fails([ 'pg_basebackup', '-D', "$tempdir/tarbackup_l3", '-Ft' ],
- 'pg_basebackup tar with long symlink target fails');
-psql 'postgres', "DROP TABLESPACE tblspc3;";
diff --git a/src/bin/pg_controldata/t/001_pg_controldata.pl b/src/bin/pg_controldata/t/001_pg_controldata.pl
index a4180e7..fc18a3a 100644
--- a/src/bin/pg_controldata/t/001_pg_controldata.pl
+++ b/src/bin/pg_controldata/t/001_pg_controldata.pl
@@ -1,5 +1,6 @@
use strict;
use warnings;
+use Config;
use TestLib;
use Test::More tests => 13;
@@ -11,6 +12,8 @@ program_options_handling_ok('pg_controldata');
command_fails(['pg_controldata'], 'pg_controldata without arguments fails');
command_fails([ 'pg_controldata', 'nonexistent' ],
'pg_controldata with nonexistent directory fails');
-system_or_bail "initdb -D '$tempdir'/data -A trust >/dev/null";
+
+my $null_ptr = ($Config{osname} eq "MSWin32") ? "NUL" : "/dev/null";
+system_or_bail "initdb -D $tempdir/data -A trust > $null_ptr";
command_like([ 'pg_controldata', "$tempdir/data" ],
qr/checkpoint/, 'pg_controldata produces output');
diff --git a/src/bin/pg_ctl/t/001_start_stop.pl b/src/bin/pg_ctl/t/001_start_stop.pl
index 17309e8..66f67f3 100644
--- a/src/bin/pg_ctl/t/001_start_stop.pl
+++ b/src/bin/pg_ctl/t/001_start_stop.pl
@@ -1,5 +1,6 @@
use strict;
use warnings;
+use Config;
use TestLib;
use Test::More tests => 17;
@@ -15,12 +16,19 @@ command_exit_is([ 'pg_ctl', 'start', '-D', "$tempdir/nonexistent" ],
command_ok([ 'pg_ctl', 'initdb', '-D', "$tempdir/data" ], 'pg_ctl initdb');
command_ok(
- [ "$ENV{top_builddir}/src/test/regress/pg_regress", '--config-auth',
+ [ $ENV{TESTREGRESS}, '--config-auth',
"$tempdir/data" ],
'configure authentication');
open CONF, ">>$tempdir/data/postgresql.conf";
-print CONF "listen_addresses = ''\n";
-print CONF "unix_socket_directories = '$tempdir_short'\n";
+if ($Config{osname} eq "MSWin32")
+{
+ print CONF "listen_addresses = '127.0.0.1'\n";
+}
+else
+{
+ print CONF "listen_addresses = ''\n";
+ print CONF "unix_socket_directories = '$tempdir_short'\n";
+}
close CONF;
command_ok([ 'pg_ctl', 'start', '-D', "$tempdir/data", '-w' ],
'pg_ctl start -w');
diff --git a/src/bin/pg_ctl/t/002_status.pl b/src/bin/pg_ctl/t/002_status.pl
index b8cbbda..480a02e 100644
--- a/src/bin/pg_ctl/t/002_status.pl
+++ b/src/bin/pg_ctl/t/002_status.pl
@@ -1,5 +1,6 @@
use strict;
use warnings;
+use Config;
use TestLib;
use Test::More tests => 3;
@@ -11,8 +12,15 @@ command_exit_is([ 'pg_ctl', 'status', '-D', "$tempdir/nonexistent" ],
standard_initdb "$tempdir/data";
open CONF, ">>$tempdir/data/postgresql.conf";
-print CONF "listen_addresses = ''\n";
-print CONF "unix_socket_directories = '$tempdir_short'\n";
+if ($Config{osname} eq "MSWin32")
+{
+ print CONF "listen_addresses = '127.0.0.1'\n";
+}
+else
+{
+ print CONF "listen_addresses = ''\n";
+ print CONF "unix_socket_directories = '$tempdir_short'\n";
+}
close CONF;
command_exit_is([ 'pg_ctl', 'status', '-D', "$tempdir/data" ],
diff --git a/src/bin/pg_rewind/RewindTest.pm b/src/bin/pg_rewind/RewindTest.pm
index a5f7d08..088a021 100644
--- a/src/bin/pg_rewind/RewindTest.pm
+++ b/src/bin/pg_rewind/RewindTest.pm
@@ -38,6 +38,7 @@ use warnings;
use TestLib;
use Test::More;
+use Config;
use File::Copy;
use File::Path qw(remove_tree);
use IPC::Run qw(run start);
@@ -80,6 +81,7 @@ my $port_master=$ENV{PGPORT};
my $port_standby=$port_master + 1;
my $log_path;
+my $log_redirect;
my $tempdir_short;
my $connstr_master="port=$port_master";
@@ -170,7 +172,12 @@ sub init_rewind_test
my $testname = shift;
my $test_mode = shift;
- $log_path="regress_log/pg_rewind_log_${testname}_${test_mode}";
+ $log_path = "regress_log/pg_rewind_log_${testname}_${test_mode}";
+ $log_redirect = ($Config{osname} eq "MSWin32") ? "> nul" : ">>$log_path 2>&1";
+
+ $testroot = TestLib::tempdir;
+ $test_master_datadir="$testroot/data_master";
+ $test_standby_datadir="$testroot/data_standby";
remove_tree $log_path;
}
@@ -197,15 +204,30 @@ max_connections = 10
));
# Accept replication connections on master
- append_to_file("$test_master_datadir/pg_hba.conf", qq(
+ if ($Config{osname} eq "MSWin32")
+ {
+ append_to_file("$test_master_datadir/pg_hba.conf", qq(
+host replication all 127.0.0.1/32 sspi include_realm=1 map=regress
+host replication all ::1/128 sspi include_realm=1 map=regress
+));
+ }
+ else
+ {
+ append_to_file("$test_master_datadir/pg_hba.conf", qq(
local replication all trust
));
+ }
- system_or_bail("pg_ctl -w -D $test_master_datadir -o \"-k $tempdir_short --listen-addresses='' -p $port_master\" start >>$log_path 2>&1");
+ my $ctl_options = ($Config{osname} eq "MSWin32") ?
+ "--listen-addresses=127.0.0.1 -p $port_master" :
+ "-k $tempdir_short --listen-addresses='' -p $port_master";
+
+ system_or_bail("pg_ctl -w -D $test_master_datadir -o \"$ctl_options\" start $log_redirect");
#### Now run the test-specific parts to initialize the master before setting
# up standby
- $ENV{PGHOST} = $tempdir_short;
+ $ENV{PGHOST} = ($Config{osname} eq "MSWin32") ?
+ "127.0.0.1" : $tempdir_short;
}
sub create_standby
@@ -214,15 +236,19 @@ sub create_standby
remove_tree $test_standby_datadir;
# Base backup is taken with xlog files included
- system_or_bail("pg_basebackup -D $test_standby_datadir -p $port_master -x >>$log_path 2>&1");
+ system_or_bail("pg_basebackup -D $test_standby_datadir -p $port_master -x $log_redirect");
append_to_file("$test_standby_datadir/recovery.conf", qq(
primary_conninfo='$connstr_master application_name=rewind_standby'
standby_mode=on
recovery_target_timeline='latest'
));
+ my $ctl_options = ($Config{osname} eq "MSWin32") ?
+ "--listen-addresses=127.0.0.1 -p $port_standby" :
+ "-k $tempdir_short --listen-addresses='' -p $port_standby";
+
# Start standby
- system_or_bail("pg_ctl -w -D $test_standby_datadir -o \"-k $tempdir_short --listen-addresses='' -p $port_standby\" start >>$log_path 2>&1");
+ system_or_bail("pg_ctl -w -D $test_standby_datadir -o \"$ctl_options\" start $log_redirect");
# Wait until the standby has caught up with the primary, by polling
# pg_stat_replication.
@@ -249,7 +275,7 @@ sub run_pg_rewind
my $test_mode = shift;
# Stop the master and be ready to perform the rewind
- system_or_bail("pg_ctl -w -D $test_master_datadir stop -m fast >>$log_path 2>&1");
+ system_or_bail("pg_ctl -w -D $test_master_datadir -m fast stop $log_redirect");
# At this point, the rewind processing is ready to run.
# We now have a very simple scenario with a few diverged WAL record.
@@ -264,7 +290,7 @@ sub run_pg_rewind
{
# Do rewind using a local pgdata as source
# Stop the master and be ready to perform the rewind
- system_or_bail("pg_ctl -w -D $test_standby_datadir stop -m fast >>$log_path 2>&1");
+ system_or_bail("pg_ctl -w -D $test_standby_datadir -m fast stop $log_redirect");
my $result =
run(['pg_rewind',
"--debug",
@@ -278,6 +304,7 @@ sub run_pg_rewind
# Do rewind using a remote connection as source
my $result =
run(['pg_rewind',
+ "--debug",
"--source-server", "port=$port_standby dbname=postgres",
"--target-pgdata=$test_master_datadir"],
'>>', $log_path, '2>&1');
@@ -297,8 +324,12 @@ standby_mode=on
recovery_target_timeline='latest'
));
+ my $ctl_options = ($Config{osname} eq "MSWin32") ?
+ "--listen-addresses=127.0.0.1 -p $port_master" :
+ "-k $tempdir_short --listen-addresses='' -p $port_master";
+
# Restart the master to check that rewind went correctly
- system_or_bail("pg_ctl -w -D $test_master_datadir -o \"-k $tempdir_short --listen-addresses='' -p $port_master\" start >>$log_path 2>&1");
+ system_or_bail("pg_ctl -w -D $test_master_datadir -o \"$ctl_options\" start $log_redirect");
#### Now run the test-specific parts to check the result
}
@@ -306,13 +337,16 @@ recovery_target_timeline='latest'
# Clean up after the test. Stop both servers, if they're still running.
sub clean_rewind_test
{
+ my $null_redirect = ($Config{osname} eq "MSWin32") ?
+ "2> nul" : "2> /dev/null";
+
if ($test_master_datadir)
{
- system "pg_ctl -D $test_master_datadir -s -m immediate stop 2> /dev/null";
+ system "pg_ctl -D $test_master_datadir -w -s -m immediate stop $null_redirect";
}
if ($test_standby_datadir)
{
- system "pg_ctl -D $test_standby_datadir -s -m immediate stop 2> /dev/null";
+ system "pg_ctl -D $test_standby_datadir -w -s -m immediate stop $null_redirect";
}
}
diff --git a/src/bin/scripts/t/020_createdb.pl b/src/bin/scripts/t/020_createdb.pl
index a44283c..7e769e4 100644
--- a/src/bin/scripts/t/020_createdb.pl
+++ b/src/bin/scripts/t/020_createdb.pl
@@ -1,5 +1,6 @@
use strict;
use warnings;
+use Config;
use TestLib;
use Test::More tests => 13;
@@ -14,6 +15,8 @@ issues_sql_like(
[ 'createdb', 'foobar1' ],
qr/statement: CREATE DATABASE foobar1/,
'SQL CREATE DATABASE run');
+
+my $encoding = ($Config{osname} eq "MSWin32") ? "win1252" : "LATIN1" ;
issues_sql_like(
[ 'createdb', '-l', 'C', '-E', 'LATIN1', '-T', 'template0', 'foobar2' ],
qr/statement: CREATE DATABASE foobar2 ENCODING 'LATIN1'/,
diff --git a/src/test/perl/TestLib.pm b/src/test/perl/TestLib.pm
index 003cd9a..9394bb6 100644
--- a/src/test/perl/TestLib.pm
+++ b/src/test/perl/TestLib.pm
@@ -3,6 +3,7 @@ package TestLib;
use strict;
use warnings;
+use Config;
use Exporter 'import';
our @EXPORT = qw(
tempdir
@@ -73,8 +74,9 @@ sub tempdir_short
sub standard_initdb
{
my $pgdata = shift;
- system_or_bail("initdb -D '$pgdata' -A trust -N >/dev/null");
- system_or_bail("$ENV{top_builddir}/src/test/regress/pg_regress",
+ my $null_ptr = ($Config{osname} eq "MSWin32") ? "NUL" : "/dev/null";
+ system_or_bail("initdb -D $pgdata -A trust -N > $null_ptr");
+ system_or_bail($ENV{TESTREGRESS},
'--config-auth', $pgdata);
}
@@ -87,10 +89,12 @@ sub start_test_server
my $tempdir_short = tempdir_short;
+ my $listen_addresses = ($Config{osname} eq "MSWin32") ? "127.0.0.1" : "''";
+
standard_initdb "$tempdir/pgdata";
$ret = system 'pg_ctl', '-D', "$tempdir/pgdata", '-s', '-w', '-l',
"$tempdir/logfile", '-o',
- "--fsync=off -k $tempdir_short --listen-addresses='' --log-statement=all",
+ "--fsync=off -k $tempdir_short --listen-addresses=$listen_addresses --log-statement=all",
'start';
if ($ret != 0)
@@ -99,7 +103,7 @@ sub start_test_server
BAIL_OUT("pg_ctl failed");
}
- $ENV{PGHOST} = $tempdir_short;
+ $ENV{PGHOST} = ($Config{osname} eq "MSWin32") ? "127.0.0.1" : $tempdir_short;
$test_server_datadir = "$tempdir/pgdata";
$test_server_logfile = "$tempdir/logfile";
}
@@ -158,7 +162,9 @@ sub command_exit_is
my $h = start $cmd, '>', File::Spec->devnull(), '2>',
File::Spec->devnull();
$h->finish();
- is($h->result(0), $expected, $test_name);
+ my $result = ($Config{osname} eq "MSWin32") ?
+ ($h->full_results)[0] : $h->result(0);
+ is($result, $expected, $test_name);
}
sub program_help_ok
diff --git a/src/tools/msvc/Solution.pm b/src/tools/msvc/Solution.pm
index 764ba1e..e40f138 100644
--- a/src/tools/msvc/Solution.pm
+++ b/src/tools/msvc/Solution.pm
@@ -622,6 +622,7 @@ sub GetFakeConfigure
$cfg .= ' --enable-integer-datetimes'
if ($self->{options}->{integer_datetimes});
$cfg .= ' --enable-nls' if ($self->{options}->{nls});
+ $cfg .= ' --enable-tap-tests' if ($self->{options}->{taptest});
$cfg .= ' --with-ldap' if ($self->{options}->{ldap});
$cfg .= ' --without-zlib' unless ($self->{options}->{zlib});
$cfg .= ' --with-extra-version' if ($self->{options}->{extraver});
diff --git a/src/tools/msvc/config_default.pl b/src/tools/msvc/config_default.pl
index 0bee0c0..5a575e0 100644
--- a/src/tools/msvc/config_default.pl
+++ b/src/tools/msvc/config_default.pl
@@ -14,6 +14,7 @@ our $config = {
# wal_blocksize => 8, # --with-wal-blocksize, 8kB by default
# wal_segsize => 16, # --with-wal-segsize, 16MB by default
ldap => 1, # --with-ldap
+ taptest => undef, # --enable-tap-tests
extraver => undef, # --with-extra-version=<string>
nls => undef, # --enable-nls=<path>
tcl => undef, # --with-tls=<path>
diff --git a/src/tools/msvc/vcregress.pl b/src/tools/msvc/vcregress.pl
index 0153f05..9336514 100644
--- a/src/tools/msvc/vcregress.pl
+++ b/src/tools/msvc/vcregress.pl
@@ -7,7 +7,9 @@ use strict;
our $config;
use Cwd;
+use File::Basename;
use File::Copy;
+use File::Find ();
use Install qw(Install);
@@ -32,7 +34,7 @@ if (-e "src/tools/msvc/buildenv.pl")
my $what = shift || "";
if ($what =~
-/^(check|installcheck|plcheck|contribcheck|modulescheck|ecpgcheck|isolationcheck|upgradecheck)$/i
+/^(check|installcheck|plcheck|contribcheck|modulescheck|ecpgcheck|isolationcheck|upgradecheck|tapcheck)$/i
)
{
$what = uc $what;
@@ -79,6 +81,7 @@ my %command = (
CONTRIBCHECK => \&contribcheck,
MODULESCHECK => \&modulescheck,
ISOLATIONCHECK => \&isolationcheck,
+ TAPCHECK => \&tapcheck,
UPGRADECHECK => \&upgradecheck,);
my $proc = $command{$what};
@@ -172,6 +175,49 @@ sub isolationcheck
exit $status if $status;
}
+sub tapcheck
+{
+ if (!defined($config->{taptest}))
+ {
+ print "TAP tests not enabled\n";
+ exit 0;
+ }
+
+ InstallTemp();
+
+ my @args = ( "prove", "--verbose", "t/*.pl");
+
+ $ENV{PATH} = "$tmp_installdir/bin;$ENV{PATH}";
+ $ENV{PERL5LIB} = "$topdir/src/test/perl;$ENV{PERL5LIB}";
+ $ENV{TESTREGRESS} = "$topdir/$Config/pg_regress/pg_regress";
+
+ # Find out all the existing TAP tests by simply looking for t/
+ # in the tree.
+ my $tap_dirs = [];
+ my @top_dir = ($topdir);
+ File::Find::find(
+ { wanted => sub {
+ /^t\z/s
+ && push(@$tap_dirs, $File::Find::name);
+ }
+ },
+ @top_dir);
+
+ # Process each test
+ foreach my $test_path (@$tap_dirs)
+ {
+ next if ($test_path =~ /\/ssl\// && !defined($config->{openssl}));
+
+ my $dir = dirname($test_path);
+ chdir $dir;
+ # Reset those values, they may have been changed by another test.
+ $ENV{TESTDIR} = "$dir";
+ system(@args);
+ my $status = $? >> 8;
+ exit $status if $status;
+ }
+}
+
sub plcheck
{
chdir $startdir;
--
2.3.6
From ad498861ef5355ac78b9bbd35d37f5a04698213d Mon Sep 17 00:00:00 2001
From: Michael Paquier <mich...@otacoo.com>
Date: Sun, 19 Apr 2015 21:47:43 +0900
Subject: [PATCH 2/2] Prefer IPC's run to system_or_bail in pg_rewind tests
This facilitates log capture on Windows, the former method making tests
failing on Windows when multiple processes try to access this log file.
---
src/bin/pg_rewind/RewindTest.pm | 23 ++++++++++++++---------
1 file changed, 14 insertions(+), 9 deletions(-)
diff --git a/src/bin/pg_rewind/RewindTest.pm b/src/bin/pg_rewind/RewindTest.pm
index 088a021..93994ef 100644
--- a/src/bin/pg_rewind/RewindTest.pm
+++ b/src/bin/pg_rewind/RewindTest.pm
@@ -81,7 +81,6 @@ my $port_master=$ENV{PGPORT};
my $port_standby=$port_master + 1;
my $log_path;
-my $log_redirect;
my $tempdir_short;
my $connstr_master="port=$port_master";
@@ -173,7 +172,6 @@ sub init_rewind_test
my $test_mode = shift;
$log_path = "regress_log/pg_rewind_log_${testname}_${test_mode}";
- $log_redirect = ($Config{osname} eq "MSWin32") ? "> nul" : ">>$log_path 2>&1";
$testroot = TestLib::tempdir;
$test_master_datadir="$testroot/data_master";
@@ -222,7 +220,8 @@ local replication all trust
"--listen-addresses=127.0.0.1 -p $port_master" :
"-k $tempdir_short --listen-addresses='' -p $port_master";
- system_or_bail("pg_ctl -w -D $test_master_datadir -o \"$ctl_options\" start $log_redirect");
+ run(['pg_ctl', '-w', '-D', "$test_master_datadir", '-o',
+ "$ctl_options", 'start'], '>>', $log_path, '2>&1');
#### Now run the test-specific parts to initialize the master before setting
# up standby
@@ -236,7 +235,8 @@ sub create_standby
remove_tree $test_standby_datadir;
# Base backup is taken with xlog files included
- system_or_bail("pg_basebackup -D $test_standby_datadir -p $port_master -x $log_redirect");
+ run(['pg_basebackup', '-D', "$test_standby_datadir",
+ '-p', "$port_master", '-x'], '>>', $log_path, '2>&1');
append_to_file("$test_standby_datadir/recovery.conf", qq(
primary_conninfo='$connstr_master application_name=rewind_standby'
standby_mode=on
@@ -248,7 +248,8 @@ recovery_target_timeline='latest'
"-k $tempdir_short --listen-addresses='' -p $port_standby";
# Start standby
- system_or_bail("pg_ctl -w -D $test_standby_datadir -o \"$ctl_options\" start $log_redirect");
+ run(['pg_ctl', '-w', '-D', "$test_standby_datadir", '-o',
+ "$ctl_options", 'start'], '>>', $log_path, '2>&1');
# Wait until the standby has caught up with the primary, by polling
# pg_stat_replication.
@@ -265,7 +266,8 @@ sub promote_standby
# Now promote slave and insert some new data on master, this will put
# the master out-of-sync with the standby. Wait until the standby is
# out of recovery mode, and is ready to accept read-write connections.
- system_or_bail("pg_ctl -w -D $test_standby_datadir promote >>$log_path 2>&1");
+ run(['pg_ctl', '-w', '-D', "$test_standby_datadir", 'promote'],
+ '>>', $log_path, '2>&1');
poll_query_until("SELECT NOT pg_is_in_recovery()", $connstr_standby)
or die "Timed out while waiting for promotion of standby";
}
@@ -275,7 +277,8 @@ sub run_pg_rewind
my $test_mode = shift;
# Stop the master and be ready to perform the rewind
- system_or_bail("pg_ctl -w -D $test_master_datadir -m fast stop $log_redirect");
+ run(['pg_ctl', '-w', '-D', "$test_master_datadir", '-m',
+ 'fast', 'stop'], '>>', $log_path, '2>&1');
# At this point, the rewind processing is ready to run.
# We now have a very simple scenario with a few diverged WAL record.
@@ -290,7 +293,8 @@ sub run_pg_rewind
{
# Do rewind using a local pgdata as source
# Stop the master and be ready to perform the rewind
- system_or_bail("pg_ctl -w -D $test_standby_datadir -m fast stop $log_redirect");
+ run(['pg_ctl', '-w', '-D', "$test_standby_datadir", '-m',
+ 'fast', 'stop'], '>>', $log_path, '2>&1');
my $result =
run(['pg_rewind',
"--debug",
@@ -329,7 +333,8 @@ recovery_target_timeline='latest'
"-k $tempdir_short --listen-addresses='' -p $port_master";
# Restart the master to check that rewind went correctly
- system_or_bail("pg_ctl -w -D $test_master_datadir -o \"$ctl_options\" start $log_redirect");
+ run(['pg_ctl', '-w', '-D', "$test_master_datadir", '-o',
+ "$ctl_options", 'start'], '>>', $log_path, '2>&1');
#### Now run the test-specific parts to check the result
}
--
2.3.6
--
Sent via pgsql-hackers mailing list (pgsql-hackers@postgresql.org)
To make changes to your subscription:
http://www.postgresql.org/mailpref/pgsql-hackers
