On 07/08/2015 11:26 AM, Michael Paquier wrote:
On Wed, Jul 8, 2015 at 6:10 AM, Heikki Linnakangas <hlinn...@iki.fi> wrote:
* whenever a test case is reported as success/fail.
Just to be sure, does this concern the "ok/not ok" messages printed
out by each test run? Or is it a custom message that you have in mind?
Right. It would be nice to have the same output that's printed to the
console also in the log.
Looking at the manual page of Test::More, it looks like you could change
where the perl script's STDOUT and STDERR point to, because Test::More takes
a copy of them (when? at program startup I guess..). That would be much more
convenient than decorating every run call with ">> logfile".
Hm. There are two types of logs we want to capture:
1) stdout and stderr from the subprocesses kicked by IPC::Run::run
2) Status messages written in the log file by the process running the tests.
Perhaps we could redirect the output of stdout and stderr but I think
that this is going to need an fd open from the beginning of the test
until the end, with something like that:
open my $test_logfile_fd, '>>', $test_logfile;
*STDOUT = $test_logfile_fd;
*STDERR = $test_logfile_fd;
While that would work on OSX and Linux for sure, I suspect that this
will not on Windows where two concurrent processes cannot write to the
same file.
Hmm, as long as you make sure all the processes use the same filehandle,
rather than open the log file separately, I think it should work. But
it's Windows, so who knows..
I came up with the attached, which does that. It also plays some tricks
with perl "tie", to copy the "ok - ..." lines that go to the console, to
the log.
I tried to test that on my Windows system, but I don't have IPC::Run
installed. How did you get that on Windows? Can you test this?
Also, the output can be correctly captured by just
appending that to a couple of places:
[ '>>', $test_logfile, '2>&1']
And this solution proves to work as well on Windows...
Yeah, but that's tedious.
- Heikki
commit 70b922632412c2719c0d21b00a4abf0cb6062f5b
Author: Heikki Linnakangas <heikki.linnakan...@iki.fi>
Date: Wed Jul 8 18:14:16 2015 +0300
Improve logging in TAP tests
WIP
diff --git a/src/Makefile.global.in b/src/Makefile.global.in
index 8eab178..8d1250d 100644
--- a/src/Makefile.global.in
+++ b/src/Makefile.global.in
@@ -337,6 +337,7 @@ cd $(srcdir) && TESTDIR='$(CURDIR)' PATH="$(bindir):$$PATH" PGPORT='6$(DEF_PGPOR
endef
define prove_check
+rm -rf $(srcdir)/tmp_check/log
cd $(srcdir) && TESTDIR='$(CURDIR)' $(with_temp_install) PGPORT='6$(DEF_PGPORT)' top_builddir='$(CURDIR)/$(top_builddir)' $(PROVE) $(PG_PROVE_FLAGS) $(PROVE_FLAGS) t/*.pl
endef
diff --git a/src/bin/pg_basebackup/t/010_pg_basebackup.pl b/src/bin/pg_basebackup/t/010_pg_basebackup.pl
index c8c9250..e47c3a0 100644
--- a/src/bin/pg_basebackup/t/010_pg_basebackup.pl
+++ b/src/bin/pg_basebackup/t/010_pg_basebackup.pl
@@ -30,7 +30,7 @@ print HBA "local replication all trust\n";
print HBA "host replication all 127.0.0.1/32 trust\n";
print HBA "host replication all ::1/128 trust\n";
close HBA;
-system_or_bail 'pg_ctl', '-s', '-D', "$tempdir/pgdata", 'reload';
+system_or_bail 'pg_ctl', '-D', "$tempdir/pgdata", 'reload';
command_fails(
[ 'pg_basebackup', '-D', "$tempdir/backup" ],
diff --git a/src/bin/pg_controldata/t/001_pg_controldata.pl b/src/bin/pg_controldata/t/001_pg_controldata.pl
index a4180e7..e36fa2d 100644
--- a/src/bin/pg_controldata/t/001_pg_controldata.pl
+++ b/src/bin/pg_controldata/t/001_pg_controldata.pl
@@ -11,6 +11,6 @@ program_options_handling_ok('pg_controldata');
command_fails(['pg_controldata'], 'pg_controldata without arguments fails');
command_fails([ 'pg_controldata', 'nonexistent' ],
'pg_controldata with nonexistent directory fails');
-system_or_bail "initdb -D '$tempdir'/data -A trust >/dev/null";
+system_or_bail 'initdb', '-D', "$tempdir/data", '-A', 'trust';
command_like([ 'pg_controldata', "$tempdir/data" ],
qr/checkpoint/, 'pg_controldata produces output');
diff --git a/src/bin/pg_ctl/t/001_start_stop.pl b/src/bin/pg_ctl/t/001_start_stop.pl
index 6c9ec5c..bcceb57d 100644
--- a/src/bin/pg_ctl/t/001_start_stop.pl
+++ b/src/bin/pg_ctl/t/001_start_stop.pl
@@ -36,4 +36,4 @@ command_ok([ 'pg_ctl', 'restart', '-D', "$tempdir/data", '-w', '-m', 'fast' ],
command_ok([ 'pg_ctl', 'restart', '-D', "$tempdir/data", '-w', '-m', 'fast' ],
'pg_ctl restart with server running');
-system_or_bail 'pg_ctl', '-s', 'stop', '-D', "$tempdir/data", '-m', 'fast';
+system_or_bail 'pg_ctl', 'stop', '-D', "$tempdir/data", '-m', 'fast';
diff --git a/src/bin/pg_ctl/t/002_status.pl b/src/bin/pg_ctl/t/002_status.pl
index 0558854..ec0a2a7 100644
--- a/src/bin/pg_ctl/t/002_status.pl
+++ b/src/bin/pg_ctl/t/002_status.pl
@@ -18,9 +18,9 @@ close CONF;
command_exit_is([ 'pg_ctl', 'status', '-D', "$tempdir/data" ],
3, 'pg_ctl status with server not running');
-system_or_bail 'pg_ctl', '-s', '-l', "$tempdir/logfile", '-D',
+system_or_bail 'pg_ctl', '-l', "$tempdir/logfile", '-D',
"$tempdir/data", '-w', 'start';
command_exit_is([ 'pg_ctl', 'status', '-D', "$tempdir/data" ],
0, 'pg_ctl status with server running');
-system_or_bail 'pg_ctl', '-s', 'stop', '-D', "$tempdir/data", '-m', 'fast';
+system_or_bail 'pg_ctl', 'stop', '-D', "$tempdir/data", '-m', 'fast';
diff --git a/src/bin/pg_rewind/.gitignore b/src/bin/pg_rewind/.gitignore
index 9ade7ef..79ddca3 100644
--- a/src/bin/pg_rewind/.gitignore
+++ b/src/bin/pg_rewind/.gitignore
@@ -4,4 +4,3 @@
# Generated by test suite
/tmp_check/
-/regress_log/
diff --git a/src/bin/pg_rewind/Makefile b/src/bin/pg_rewind/Makefile
index 7d60715..92b5d20 100644
--- a/src/bin/pg_rewind/Makefile
+++ b/src/bin/pg_rewind/Makefile
@@ -45,7 +45,7 @@ uninstall:
clean distclean maintainer-clean:
rm -f pg_rewind$(X) $(OBJS) xlogreader.c
- rm -rf tmp_check regress_log
+ rm -rf tmp_check
check:
$(prove_check)
diff --git a/src/bin/pg_rewind/RewindTest.pm b/src/bin/pg_rewind/RewindTest.pm
index 5219ec9..af2d73b 100644
--- a/src/bin/pg_rewind/RewindTest.pm
+++ b/src/bin/pg_rewind/RewindTest.pm
@@ -79,7 +79,6 @@ mkdir "regress_log";
my $port_master = $ENV{PGPORT};
my $port_standby = $port_master + 1;
-my $log_path;
my $tempdir_short;
my $connstr_master = "port=$port_master";
@@ -91,14 +90,16 @@ sub master_psql
{
my $cmd = shift;
- system_or_bail("psql -q --no-psqlrc -d $connstr_master -c \"$cmd\"");
+ system_or_bail 'psql', '-q', '--no-psqlrc', '-d', $connstr_master,
+ '-c', "$cmd";
}
sub standby_psql
{
my $cmd = shift;
- system_or_bail("psql -q --no-psqlrc -d $connstr_standby -c \"$cmd\"");
+ system_or_bail 'psql', '-q', '--no-psqlrc', '-d', $connstr_standby,
+ '-c', "$cmd";
}
# Run a query against the master, and check that the output matches what's
@@ -171,16 +172,6 @@ sub append_to_file
close $fh;
}
-sub init_rewind_test
-{
- my $testname = shift;
- my $test_mode = shift;
-
- $log_path = "regress_log/pg_rewind_log_${testname}_${test_mode}";
-
- remove_tree $log_path;
-}
-
sub setup_cluster
{
$tempdir_short = tempdir_short;
@@ -209,9 +200,10 @@ max_connections = 10
local replication all trust
));
- system_or_bail(
-"pg_ctl -w -D $test_master_datadir -o \"-k $tempdir_short --listen-addresses='' -p $port_master\" start >>$log_path 2>&1"
- );
+ system_or_bail('pg_ctl' , '-w',
+ '-D' , $test_master_datadir,
+ "-o", "-k $tempdir_short --listen-addresses='' -p $port_master",
+ 'start');
#### Now run the test-specific parts to initialize the master before setting
# up standby
@@ -225,8 +217,8 @@ sub create_standby
remove_tree $test_standby_datadir;
# Base backup is taken with xlog files included
- system_or_bail(
-"pg_basebackup -D $test_standby_datadir -p $port_master -x >>$log_path 2>&1");
+ system_or_bail('pg_basebackup', '-D', $test_standby_datadir,
+ '-p', $port_master, '-x';
append_to_file(
"$test_standby_datadir/recovery.conf", qq(
primary_conninfo='$connstr_master application_name=rewind_standby'
@@ -235,9 +227,9 @@ recovery_target_timeline='latest'
));
# Start standby
- system_or_bail(
-"pg_ctl -w -D $test_standby_datadir -o \"-k $tempdir_short --listen-addresses='' -p $port_standby\" start >>$log_path 2>&1"
- );
+ system_or_bail('pg_ctl', '-w', '-D', $test_standby_datadir,
+ '-o', "-k $tempdir_short --listen-addresses='' -p $port_standby",
+ 'start');
# Wait until the standby has caught up with the primary, by polling
# pg_stat_replication.
@@ -255,8 +247,7 @@ sub promote_standby
# Now promote slave and insert some new data on master, this will put
# the master out-of-sync with the standby. Wait until the standby is
# out of recovery mode, and is ready to accept read-write connections.
- system_or_bail(
- "pg_ctl -w -D $test_standby_datadir promote >>$log_path 2>&1");
+ system_or_bail('pg_ctl', '-w', '-D', $test_standby_datadir, 'promote');
poll_query_until("SELECT NOT pg_is_in_recovery()", $connstr_standby)
or die "Timed out while waiting for promotion of standby";
@@ -274,8 +265,7 @@ sub run_pg_rewind
my $test_mode = shift;
# Stop the master and be ready to perform the rewind
- system_or_bail(
- "pg_ctl -w -D $test_master_datadir stop -m fast >>$log_path 2>&1");
+ system_or_bail('pg_ctl', '-D', $test_master_datadir, 'stop', '-m', 'fast');
# At this point, the rewind processing is ready to run.
# We now have a very simple scenario with a few diverged WAL record.
@@ -291,35 +281,24 @@ sub run_pg_rewind
# Now run pg_rewind
if ($test_mode eq "local")
{
-
# Do rewind using a local pgdata as source
# Stop the master and be ready to perform the rewind
- system_or_bail(
- "pg_ctl -w -D $test_standby_datadir stop -m fast >>$log_path 2>&1"
- );
- my $result = run(
- [ 'pg_rewind',
- "--debug",
- "--source-pgdata=$test_standby_datadir",
- "--target-pgdata=$test_master_datadir" ],
- '>>',
- $log_path,
- '2>&1');
- ok($result, 'pg_rewind local');
+ system_or_bail('pg_ctl', '-D', $test_standby_datadir, 'stop',
+ '-m', 'fast');
+ command_ok(['pg_rewind',
+ "--debug",
+ "--source-pgdata=$test_standby_datadir",
+ "--target-pgdata=$test_master_datadir"],
+ 'pg_rewind local');
}
elsif ($test_mode eq "remote")
{
-
# Do rewind using a remote connection as source
- my $result = run(
- [ 'pg_rewind',
- "--source-server",
- "port=$port_standby dbname=postgres",
- "--target-pgdata=$test_master_datadir" ],
- '>>',
- $log_path,
- '2>&1');
- ok($result, 'pg_rewind remote');
+ command_ok(['pg_rewind',
+ "--source-server",
+ "port=$port_standby dbname=postgres",
+ "--target-pgdata=$test_master_datadir"],
+ 'pg_rewind remote');
}
else
{
@@ -342,9 +321,9 @@ recovery_target_timeline='latest'
));
# Restart the master to check that rewind went correctly
- system_or_bail(
-"pg_ctl -w -D $test_master_datadir -o \"-k $tempdir_short --listen-addresses='' -p $port_master\" start >>$log_path 2>&1"
- );
+ system_or_bail('pg_ctl', '-w', '-D', $test_master_datadir,
+ '-o', "-k $tempdir_short --listen-addresses='' -p $port_master",
+ 'start');
#### Now run the test-specific parts to check the result
}
@@ -355,12 +334,12 @@ sub clean_rewind_test
if ($test_master_datadir)
{
system
- "pg_ctl -D $test_master_datadir -s -m immediate stop 2> /dev/null";
+ 'pg_ctl', '-D', $test_master_datadir, '-m', 'immediate', 'stop';
}
if ($test_standby_datadir)
{
system
- "pg_ctl -D $test_standby_datadir -s -m immediate stop 2> /dev/null";
+ 'pg_ctl', '-D', $test_standby_datadir, '-m', 'immediate', 'stop';
}
}
diff --git a/src/bin/pg_rewind/t/001_basic.pl b/src/bin/pg_rewind/t/001_basic.pl
index f60368b..be7d887 100644
--- a/src/bin/pg_rewind/t/001_basic.pl
+++ b/src/bin/pg_rewind/t/001_basic.pl
@@ -9,7 +9,6 @@ sub run_test
{
my $test_mode = shift;
- RewindTest::init_rewind_test('basic', $test_mode);
RewindTest::setup_cluster();
# Create a test table and insert a row in master.
diff --git a/src/bin/pg_rewind/t/002_databases.pl b/src/bin/pg_rewind/t/002_databases.pl
index 7564fa9..b0b007a 100644
--- a/src/bin/pg_rewind/t/002_databases.pl
+++ b/src/bin/pg_rewind/t/002_databases.pl
@@ -9,7 +9,6 @@ sub run_test
{
my $test_mode = shift;
- RewindTest::init_rewind_test('databases', $test_mode);
RewindTest::setup_cluster();
# Create a database in master.
diff --git a/src/bin/pg_rewind/t/003_extrafiles.pl b/src/bin/pg_rewind/t/003_extrafiles.pl
index 9a95268..0cd0ac4 100644
--- a/src/bin/pg_rewind/t/003_extrafiles.pl
+++ b/src/bin/pg_rewind/t/003_extrafiles.pl
@@ -14,7 +14,6 @@ sub run_test
{
my $test_mode = shift;
- RewindTest::init_rewind_test('extrafiles', $test_mode);
RewindTest::setup_cluster();
my $test_master_datadir = $RewindTest::test_master_datadir;
diff --git a/src/test/perl/SimpleTee.pm b/src/test/perl/SimpleTee.pm
new file mode 100644
index 0000000..8d31a40
--- /dev/null
+++ b/src/test/perl/SimpleTee.pm
@@ -0,0 +1,27 @@
+# A simple 'tee' implementation, using perl tie.
+#
+# Whenever you print to the handle, it gets forwarded to a list of
+# handles. The list of output filehandles is passed to the constructor.
+#
+# This is similar to IO::Tee, but only used for output. Only the PRINT
+# method is currently implemented; that's all we need. We don't want to
+# depend on IO::Tee just for this.
+
+package SimpleTee;
+use strict;
+
+sub TIEHANDLE {
+ my $self = shift;
+ bless \@_, $self;
+}
+
+sub PRINT {
+ my $self = shift;
+ my $ok = 1;
+ for my $fh (@$self) {
+ print $fh @_ or $ok = 0;
+ }
+ return $ok;
+}
+
+1;
diff --git a/src/test/perl/TestLib.pm b/src/test/perl/TestLib.pm
index ef42366..8cf3fc1 100644
--- a/src/test/perl/TestLib.pm
+++ b/src/test/perl/TestLib.pm
@@ -12,6 +12,8 @@ our @EXPORT = qw(
restart_test_server
psql
system_or_bail
+ system_log
+ run_log
command_ok
command_fails
@@ -24,11 +26,47 @@ our @EXPORT = qw(
);
use Cwd;
+use File::Basename;
use File::Spec;
use File::Temp ();
use IPC::Run qw(run start);
+
+use SimpleTee;
+
use Test::More;
+# Open log file. For each test, the log file name uses the name of the
+# file launching this module, without its file prefix for readability.
+my $log_path = 'tmp_check/log';
+mkdir 'tmp_check';
+mkdir $log_path;
+my $test_logfile = basename($0);
+$test_logfile =~ s/\.[^.]+$//;
+$test_logfile = "$log_path/regress_log_$test_logfile";
+open TESTLOG, '>', $test_logfile or die "Cannot open STDOUT to logfile: $!";
+
+# Hijack STDOUT and STDERR to the log file
+open(ORIG_STDOUT, ">&STDOUT");
+open(ORIG_STDERR, ">&STDERR");
+open(STDOUT, ">&TESTLOG");
+open(STDERR, ">&TESTLOG");
+
+# The test output (ok ...) needs to be printed to the original STDOUT
+# so that the 'prove' program can parse it, and also display it to the
+# user in real time. But also copy it to the log file, to provide more
+# context in the log file.
+my $builder = Test::More->builder;
+my $fh = $builder->output;
+tie *$fh, "SimpleTee", *ORIG_STDOUT, *TESTLOG;
+$fh = $builder->failure_output;
+tie *$fh, "SimpleTee", *ORIG_STDERR, *TESTLOG;
+
+# Enable auto-flushing for all the file handles. Stderr and stdout are
+# redirected to the same file, and buffering causes the lines to appear
+# in the log in confusing order.
+autoflush STDOUT 1;
+autoflush STDERR 1;
+autoflush TESTLOG 1;
# Set to untranslated messages, to be able to compare program output
# with expected strings.
@@ -52,7 +90,6 @@ if (!$ENV{PGPORT})
$ENV{PGPORT} = int($ENV{PGPORT}) % 65536;
-
#
# Helper functions
#
@@ -77,7 +114,7 @@ sub tempdir_short
sub standard_initdb
{
my $pgdata = shift;
- system_or_bail("initdb -D '$pgdata' -A trust -N >/dev/null");
+ system_or_bail('initdb', '-D', "$pgdata", '-A' , 'trust', '-N');
system_or_bail("$ENV{top_builddir}/src/test/regress/pg_regress",
'--config-auth', $pgdata);
}
@@ -91,14 +128,15 @@ sub start_test_server
my $tempdir_short = tempdir_short;
+ print("### Starting test server in $tempdir\n");
standard_initdb "$tempdir/pgdata";
- $ret = system 'pg_ctl', '-D', "$tempdir/pgdata", '-s', '-w', '-l',
+ $ret = system_log('pg_ctl', '-D', "$tempdir/pgdata", '-w', '-l',
"$tempdir/logfile", '-o',
-"--fsync=off -k $tempdir_short --listen-addresses='' --log-statement=all",
- 'start';
-
+"--fsync=off -k \"$tempdir_short\" --listen-addresses='' --log-statement=all",
+ 'start');
if ($ret != 0)
{
+ print "# pg_ctl failed; logfile:\n";
system('cat', "$tempdir/logfile");
BAIL_OUT("pg_ctl failed");
}
@@ -110,28 +148,45 @@ sub start_test_server
sub restart_test_server
{
- system 'pg_ctl', '-s', '-D', $test_server_datadir, '-w', '-l',
- $test_server_logfile, 'restart';
+ print("### Restarting test server\n");
+ system_log('pg_ctl', '-D', $test_server_datadir, '-w', '-l',
+ $test_server_logfile, 'restart');
}
END
{
if ($test_server_datadir)
{
- system 'pg_ctl', '-D', $test_server_datadir, '-s', '-w', '-m',
- 'immediate', 'stop';
+ system_log('pg_ctl', '-D', $test_server_datadir, '-m',
+ 'immediate', 'stop');
}
}
sub psql
{
my ($dbname, $sql) = @_;
+ print("# Running SQL command: $sql\n");
run [ 'psql', '-X', '-q', '-d', $dbname, '-f', '-' ], '<', \$sql or die;
}
sub system_or_bail
{
- system(@_) == 0 or BAIL_OUT("system @_ failed: $?");
+ if (system_log(@_) != 0)
+ {
+ BAIL_OUT("system $_[0] failed: $?");
+ }
+}
+
+sub system_log
+{
+ print("# Running: " . join(" ", @_) ."\n");
+ return system(@_);
+}
+
+sub run_log
+{
+ print("# Running: " . join(" ", @{$_[0]}) ."\n");
+ return run (@_);
}
@@ -143,24 +198,22 @@ sub system_or_bail
sub command_ok
{
my ($cmd, $test_name) = @_;
- my $result = run $cmd, '>', File::Spec->devnull(), '2>',
- File::Spec->devnull();
+ my $result = run_log($cmd);
ok($result, $test_name);
}
sub command_fails
{
my ($cmd, $test_name) = @_;
- my $result = run $cmd, '>', File::Spec->devnull(), '2>',
- File::Spec->devnull();
+ my $result = run_log($cmd);
ok(!$result, $test_name);
}
sub command_exit_is
{
my ($cmd, $expected, $test_name) = @_;
- my $h = start $cmd, '>', File::Spec->devnull(), '2>',
- File::Spec->devnull();
+ print("# Running: " . join(" ", @{$cmd}) ."\n");
+ my $h = start $cmd;
$h->finish();
is($h->result(0), $expected, $test_name);
}
@@ -169,6 +222,7 @@ sub program_help_ok
{
my ($cmd) = @_;
my ($stdout, $stderr);
+ print("# Running: $cmd --help\n");
my $result = run [ $cmd, '--help' ], '>', \$stdout, '2>', \$stderr;
ok($result, "$cmd --help exit code 0");
isnt($stdout, '', "$cmd --help goes to stdout");
@@ -179,6 +233,7 @@ sub program_version_ok
{
my ($cmd) = @_;
my ($stdout, $stderr);
+ print("# Running: $cmd --version\n");
my $result = run [ $cmd, '--version' ], '>', \$stdout, '2>', \$stderr;
ok($result, "$cmd --version exit code 0");
isnt($stdout, '', "$cmd --version goes to stdout");
@@ -189,6 +244,7 @@ sub program_options_handling_ok
{
my ($cmd) = @_;
my ($stdout, $stderr);
+ print("# Running: $cmd --not-a-valid-option\n");
my $result = run [ $cmd, '--not-a-valid-option' ], '>', \$stdout, '2>',
\$stderr;
ok(!$result, "$cmd with invalid option nonzero exit code");
@@ -199,6 +255,7 @@ sub command_like
{
my ($cmd, $expected_stdout, $test_name) = @_;
my ($stdout, $stderr);
+ print("# Running: " . join(" ", @{$cmd}) . "\n");
my $result = run $cmd, '>', \$stdout, '2>', \$stderr;
ok($result, "@$cmd exit code 0");
is($stderr, '', "@$cmd no stderr");
@@ -208,9 +265,8 @@ sub command_like
sub issues_sql_like
{
my ($cmd, $expected_sql, $test_name) = @_;
- my ($stdout, $stderr);
truncate $test_server_logfile, 0;
- my $result = run $cmd, '>', \$stdout, '2>', \$stderr;
+ my $result = run_log($cmd);
ok($result, "@$cmd exit code 0");
my $log = `cat '$test_server_logfile'`;
like($log, $expected_sql, "$test_name: SQL found in server log");
diff --git a/src/test/ssl/ServerSetup.pm b/src/test/ssl/ServerSetup.pm
index bbff99a..8c1b517 100644
--- a/src/test/ssl/ServerSetup.pm
+++ b/src/test/ssl/ServerSetup.pm
@@ -125,8 +125,6 @@ sub switch_server_cert
# restart_test_server() because that overrides listen_addresses to only all
# Unix domain socket connections.
- system_or_bail 'pg_ctl', 'stop', '-s', '-D', "$tempdir/pgdata", '-w';
- system_or_bail 'pg_ctl', 'start', '-s', '-D', "$tempdir/pgdata", '-w',
- '-l',
- "$tempdir/logfile";
+ system_or_bail 'pg_ctl', 'stop', '-D', "$tempdir/pgdata";
+ system_or_bail 'pg_ctl', 'start', '-D', "$tempdir/pgdata", '-w';
}
--
Sent via pgsql-hackers mailing list (pgsql-hackers@postgresql.org)
To make changes to your subscription:
http://www.postgresql.org/mailpref/pgsql-hackers
