On 05/03/2017 08:40 PM, Tom Lane wrote:
The other question I can think to ask is what will happen during pg_upgrade, given an existing installation with one or more passwords stored plain. If the answer is "silently convert to MD5", I'd be good with that.
Yes, it will silently convert to MD5. That happened even on earlier versions, if you had password_encryption=on in the new cluster (which was the default).
I'm planning to go ahead with the attached patch for this (removing password_encryption='plain' support, but keeping the default as 'md5').
- Heikki
>From 62d42e07fe09dcb8586620ee66b1567a8f002f27 Mon Sep 17 00:00:00 2001 From: Heikki Linnakangas <heikki.linnakan...@iki.fi> Date: Thu, 4 May 2017 14:31:45 +0300 Subject: [PATCH 1/1] Remove support for password_encryption='off' / 'plain'. Storing passwords in plaintext hasn't been a good idea for a very long time, if ever. Now seems like a good time to finally forbid it, since we're messing with this in PostgreSQL 10 anyway. This also removes the CREATE/ALTER USER UNENCRYPTED PASSSWORD 'foo' syntax, since storing passwords unencrypted is no longer supported. ENCRYPTED PASSWORD 'foo' is still accepted, but ENCRYPTED is now just a noise-word, it does the same as just PASSWORD 'foo'. Likewise, remove the --unencrypted option from createuser, but accept --encrypted as a no-op for backwards-compatibility. AFAICS, --encrypted was a no-op even before this patch, because createuser encrypted the password before sending it to the server even if --encrypted was not specified. It added the ENCRYPTED keyword to the SQL command, but since the password was already in encrypted form, it didn't matter. The documentation was not clear on whether that was intended or not, but the point is moot now. Also, while password_encryption='on' is still accepted as an alias for 'md5', it is now marked as hidden, so that it is not listed as an accepted value in error hints, for example. That's not directly related to removing 'plain', but it seems better this way. Discussion: https://www.postgresql.org/message-id/16e9b768-fd78-0b12-cfc1-7b6b7f238...@iki.fi --- doc/src/sgml/config.sgml | 18 +++-- doc/src/sgml/ref/alter_role.sgml | 6 +- doc/src/sgml/ref/alter_user.sgml | 2 +- doc/src/sgml/ref/create_group.sgml | 2 +- doc/src/sgml/ref/create_role.sgml | 34 +++----- doc/src/sgml/ref/create_user.sgml | 2 +- doc/src/sgml/ref/createuser.sgml | 21 +---- src/backend/commands/user.c | 34 ++------ src/backend/libpq/auth-scram.c | 20 +---- src/backend/libpq/auth.c | 26 ++---- src/backend/libpq/crypt.c | 126 +++++++++--------------------- src/backend/parser/gram.y | 14 +++- src/backend/utils/misc/guc.c | 10 +-- src/bin/psql/tab-complete.c | 25 ++---- src/bin/scripts/createuser.c | 46 ++++------- src/include/libpq/crypt.h | 9 ++- src/interfaces/libpq/fe-auth.c | 3 +- src/test/authentication/t/001_password.pl | 10 +-- src/test/regress/expected/password.out | 31 ++++---- src/test/regress/sql/password.sql | 23 +++--- 20 files changed, 154 insertions(+), 308 deletions(-) diff --git a/doc/src/sgml/config.sgml b/doc/src/sgml/config.sgml index 0b9e3002fb..20bc3c61b1 100644 --- a/doc/src/sgml/config.sgml +++ b/doc/src/sgml/config.sgml @@ -1188,14 +1188,16 @@ include_dir 'conf.d' <listitem> <para> When a password is specified in <xref linkend="sql-createrole"> or - <xref linkend="sql-alterrole"> without writing either <literal>ENCRYPTED</> - or <literal>UNENCRYPTED</>, this parameter determines whether the - password is to be encrypted. The default value is <literal>md5</>, which - stores the password as an MD5 hash. Setting this to <literal>plain</> stores - it in plaintext. <literal>on</> and <literal>off</> are also accepted, as - aliases for <literal>md5</> and <literal>plain</>, respectively. Setting - this parameter to <literal>scram-sha-256</> will encrypt the password - with SCRAM-SHA-256. + <xref linkend="sql-alterrole">, this parameter determines the algorithm + to use to encrypt the password. The default value is <literal>md5</>, + which stores the password as an MD5 hash (<literal>on</> is also + accepted, as alias for <literal>md5</>). Setting this parameter to + <literal>scram-sha-256</> will encrypt the password with SCRAM-SHA-256. + </para> + <para> + Note that older clients might lack support for the SCRAM authentication + mechanism, and hence not work with passwords encrypted with + SCRAM-SHA-256. </para> </listitem> </varlistentry> diff --git a/doc/src/sgml/ref/alter_role.sgml b/doc/src/sgml/ref/alter_role.sgml index 37fcfb926c..8cd8602bc4 100644 --- a/doc/src/sgml/ref/alter_role.sgml +++ b/doc/src/sgml/ref/alter_role.sgml @@ -33,7 +33,7 @@ ALTER ROLE <replaceable class="PARAMETER">role_specification</replaceable> [ WIT | REPLICATION | NOREPLICATION | BYPASSRLS | NOBYPASSRLS | CONNECTION LIMIT <replaceable class="PARAMETER">connlimit</replaceable> - | [ ENCRYPTED | UNENCRYPTED ] PASSWORD '<replaceable class="PARAMETER">password</replaceable>' + | [ ENCRYPTED ] PASSWORD '<replaceable class="PARAMETER">password</replaceable>' | VALID UNTIL '<replaceable class="PARAMETER">timestamp</replaceable>' ALTER ROLE <replaceable class="PARAMETER">name</replaceable> RENAME TO <replaceable>new_name</replaceable> @@ -168,9 +168,7 @@ ALTER ROLE { <replaceable class="PARAMETER">role_specification</replaceable> | A <term><literal>BYPASSRLS</literal></term> <term><literal>NOBYPASSRLS</literal></term> <term><literal>CONNECTION LIMIT</literal> <replaceable class="parameter">connlimit</replaceable></term> - <term><literal>PASSWORD</> <replaceable class="parameter">password</replaceable></term> - <term><literal>ENCRYPTED</></term> - <term><literal>UNENCRYPTED</></term> + <term>[ <literal>ENCRYPTED</> ] <literal>PASSWORD</> <replaceable class="parameter">password</replaceable></term> <term><literal>VALID UNTIL</literal> '<replaceable class="parameter">timestamp</replaceable>'</term> <listitem> <para> diff --git a/doc/src/sgml/ref/alter_user.sgml b/doc/src/sgml/ref/alter_user.sgml index 5962a8e166..9b8a39b376 100644 --- a/doc/src/sgml/ref/alter_user.sgml +++ b/doc/src/sgml/ref/alter_user.sgml @@ -33,7 +33,7 @@ ALTER USER <replaceable class="PARAMETER">role_specification</replaceable> [ WIT | REPLICATION | NOREPLICATION | BYPASSRLS | NOBYPASSRLS | CONNECTION LIMIT <replaceable class="PARAMETER">connlimit</replaceable> - | [ ENCRYPTED | UNENCRYPTED ] PASSWORD '<replaceable class="PARAMETER">password</replaceable>' + | [ ENCRYPTED ] PASSWORD '<replaceable class="PARAMETER">password</replaceable>' | VALID UNTIL '<replaceable class="PARAMETER">timestamp</replaceable>' ALTER USER <replaceable class="PARAMETER">name</replaceable> RENAME TO <replaceable>new_name</replaceable> diff --git a/doc/src/sgml/ref/create_group.sgml b/doc/src/sgml/ref/create_group.sgml index 1d5cc9b596..158617cb93 100644 --- a/doc/src/sgml/ref/create_group.sgml +++ b/doc/src/sgml/ref/create_group.sgml @@ -30,7 +30,7 @@ CREATE GROUP <replaceable class="PARAMETER">name</replaceable> [ [ WITH ] <repla | CREATEROLE | NOCREATEROLE | INHERIT | NOINHERIT | LOGIN | NOLOGIN - | [ ENCRYPTED | UNENCRYPTED ] PASSWORD '<replaceable class="PARAMETER">password</replaceable>' + | [ ENCRYPTED ] PASSWORD '<replaceable class="PARAMETER">password</replaceable>' | VALID UNTIL '<replaceable class="PARAMETER">timestamp</replaceable>' | IN ROLE <replaceable class="PARAMETER">role_name</replaceable> [, ...] | IN GROUP <replaceable class="PARAMETER">role_name</replaceable> [, ...] diff --git a/doc/src/sgml/ref/create_role.sgml b/doc/src/sgml/ref/create_role.sgml index 99d1c8336c..4e40cd21ef 100644 --- a/doc/src/sgml/ref/create_role.sgml +++ b/doc/src/sgml/ref/create_role.sgml @@ -33,7 +33,7 @@ CREATE ROLE <replaceable class="PARAMETER">name</replaceable> [ [ WITH ] <replac | REPLICATION | NOREPLICATION | BYPASSRLS | NOBYPASSRLS | CONNECTION LIMIT <replaceable class="PARAMETER">connlimit</replaceable> - | [ ENCRYPTED | UNENCRYPTED ] PASSWORD '<replaceable class="PARAMETER">password</replaceable>' + | [ ENCRYPTED ] PASSWORD '<replaceable class="PARAMETER">password</replaceable>' | VALID UNTIL '<replaceable class="PARAMETER">timestamp</replaceable>' | IN ROLE <replaceable class="PARAMETER">role_name</replaceable> [, ...] | IN GROUP <replaceable class="PARAMETER">role_name</replaceable> [, ...] @@ -207,7 +207,7 @@ CREATE ROLE <replaceable class="PARAMETER">name</replaceable> [ [ WITH ] <replac </varlistentry> <varlistentry> - <term><literal>PASSWORD</> <replaceable class="parameter">password</replaceable></term> + <term>[ <literal>ENCRYPTED</> ] <literal>PASSWORD</> <replaceable class="parameter">password</replaceable></term> <listitem> <para> Sets the role's password. (A password is only of use for @@ -219,30 +219,18 @@ CREATE ROLE <replaceable class="PARAMETER">name</replaceable> [ [ WITH ] <replac user. A null password can optionally be written explicitly as <literal>PASSWORD NULL</literal>. </para> - </listitem> - </varlistentry> - - <varlistentry> - <term><literal>ENCRYPTED</></term> - <term><literal>UNENCRYPTED</></term> - <listitem> <para> - These key words control whether the password is stored - encrypted in the system catalogs. (If neither is specified, - the default behavior is determined by the configuration - parameter <xref linkend="guc-password-encryption">.) If the - presented password string is already in MD5-encrypted or - SCRAM-encrypted format, then it is stored encrypted as-is, - regardless of whether <literal>ENCRYPTED</> or <literal>UNENCRYPTED</> - is specified (since the system cannot decrypt the specified encrypted - password string). This allows reloading of encrypted passwords + The password is always stored encrypted in the system catalogs. The + <literal>ENCRYPTED</> keyword has no effect, but is accepted for + backwards-compatibility. The method of encryption is determined + by the configuration parameter <xref linkend="guc-password-encryption">. + If the presented password string is already in MD5-encrypted or + SCRAM-encrypted format, then it is stored as-is regardless of + <varname>password_encryption</> (since the system cannot decrypt + the specified encrypted password string, to encrypt it in a + different format). This allows reloading of encrypted passwords during dump/restore. </para> - - <para> - Note that older clients might lack support for the SCRAM - authentication mechanism. - </para> </listitem> </varlistentry> diff --git a/doc/src/sgml/ref/create_user.sgml b/doc/src/sgml/ref/create_user.sgml index 574604f796..8a596eec9f 100644 --- a/doc/src/sgml/ref/create_user.sgml +++ b/doc/src/sgml/ref/create_user.sgml @@ -33,7 +33,7 @@ CREATE USER <replaceable class="PARAMETER">name</replaceable> [ [ WITH ] <replac | REPLICATION | NOREPLICATION | BYPASSRLS | NOBYPASSRLS | CONNECTION LIMIT <replaceable class="PARAMETER">connlimit</replaceable> - | [ ENCRYPTED | UNENCRYPTED ] PASSWORD '<replaceable class="PARAMETER">password</replaceable>' + | [ ENCRYPTED ] PASSWORD '<replaceable class="PARAMETER">password</replaceable>' | VALID UNTIL '<replaceable class="PARAMETER">timestamp</replaceable>' | IN ROLE <replaceable class="PARAMETER">role_name</replaceable> [, ...] | IN GROUP <replaceable class="PARAMETER">role_name</replaceable> [, ...] diff --git a/doc/src/sgml/ref/createuser.sgml b/doc/src/sgml/ref/createuser.sgml index 4332008c68..07e48c20c1 100644 --- a/doc/src/sgml/ref/createuser.sgml +++ b/doc/src/sgml/ref/createuser.sgml @@ -124,8 +124,8 @@ PostgreSQL documentation <term><option>--encrypted</></term> <listitem> <para> - Encrypts the user's password stored in the database. If not - specified, the default password behavior is used. + This option is obsolete but still accepted for backwards + compatibility. </para> </listitem> </varlistentry> @@ -205,17 +205,6 @@ PostgreSQL documentation </varlistentry> <varlistentry> - <term><option>-N</></term> - <term><option>--unencrypted</></term> - <listitem> - <para> - Does not encrypt the user's password stored in the database. If - not specified, the default password behavior is used. - </para> - </listitem> - </varlistentry> - - <varlistentry> <term><option>-P</></term> <term><option>--pwprompt</></term> <listitem> @@ -481,11 +470,7 @@ PostgreSQL documentation </screen> In the above example, the new password isn't actually echoed when typed, but we show what was typed for clarity. As you see, the password is - encrypted before it is sent to the client. If the option <option>--unencrypted</option> - is used, the password <emphasis>will</> appear in the echoed command - (and possibly also in the server log and elsewhere), - so you don't want to use <option>-e</> in that case, if - anyone else can see your screen. + encrypted before it is sent to the client. </para> </refsect1> diff --git a/src/backend/commands/user.c b/src/backend/commands/user.c index c719682274..36d5f40f06 100644 --- a/src/backend/commands/user.c +++ b/src/backend/commands/user.c @@ -80,7 +80,6 @@ CreateRole(ParseState *pstate, CreateRoleStmt *stmt) ListCell *item; ListCell *option; char *password = NULL; /* user password */ - int password_type = Password_encryption; bool issuper = false; /* Make the user a superuser? */ bool inherit = true; /* Auto inherit privileges? */ bool createrole = false; /* Can this user create roles? */ @@ -128,9 +127,7 @@ CreateRole(ParseState *pstate, CreateRoleStmt *stmt) { DefElem *defel = (DefElem *) lfirst(option); - if (strcmp(defel->defname, "password") == 0 || - strcmp(defel->defname, "encryptedPassword") == 0 || - strcmp(defel->defname, "unencryptedPassword") == 0) + if (strcmp(defel->defname, "password") == 0) { if (dpassword) ereport(ERROR, @@ -138,15 +135,6 @@ CreateRole(ParseState *pstate, CreateRoleStmt *stmt) errmsg("conflicting or redundant options"), parser_errposition(pstate, defel->location))); dpassword = defel; - if (strcmp(defel->defname, "encryptedPassword") == 0) - { - if (Password_encryption == PASSWORD_TYPE_SCRAM_SHA_256) - password_type = PASSWORD_TYPE_SCRAM_SHA_256; - else - password_type = PASSWORD_TYPE_MD5; - } - else if (strcmp(defel->defname, "unencryptedPassword") == 0) - password_type = PASSWORD_TYPE_PLAINTEXT; } else if (strcmp(defel->defname, "sysid") == 0) { @@ -400,7 +388,8 @@ CreateRole(ParseState *pstate, CreateRoleStmt *stmt) /* Encrypt the password to the requested format. */ char *shadow_pass; - shadow_pass = encrypt_password(password_type, stmt->role, password); + shadow_pass = encrypt_password(Password_encryption, stmt->role, + password); new_record[Anum_pg_authid_rolpassword - 1] = CStringGetTextDatum(shadow_pass); } @@ -503,7 +492,6 @@ AlterRole(AlterRoleStmt *stmt) ListCell *option; char *rolename = NULL; char *password = NULL; /* user password */ - int password_type = Password_encryption; int issuper = -1; /* Make the user a superuser? */ int inherit = -1; /* Auto inherit privileges? */ int createrole = -1; /* Can this user create roles? */ @@ -537,24 +525,13 @@ AlterRole(AlterRoleStmt *stmt) { DefElem *defel = (DefElem *) lfirst(option); - if (strcmp(defel->defname, "password") == 0 || - strcmp(defel->defname, "encryptedPassword") == 0 || - strcmp(defel->defname, "unencryptedPassword") == 0) + if (strcmp(defel->defname, "password") == 0) { if (dpassword) ereport(ERROR, (errcode(ERRCODE_SYNTAX_ERROR), errmsg("conflicting or redundant options"))); dpassword = defel; - if (strcmp(defel->defname, "encryptedPassword") == 0) - { - if (Password_encryption == PASSWORD_TYPE_SCRAM_SHA_256) - password_type = PASSWORD_TYPE_SCRAM_SHA_256; - else - password_type = PASSWORD_TYPE_MD5; - } - else if (strcmp(defel->defname, "unencryptedPassword") == 0) - password_type = PASSWORD_TYPE_PLAINTEXT; } else if (strcmp(defel->defname, "superuser") == 0) { @@ -809,7 +786,8 @@ AlterRole(AlterRoleStmt *stmt) /* Encrypt the password to the requested format. */ char *shadow_pass; - shadow_pass = encrypt_password(password_type, rolename, password); + shadow_pass = encrypt_password(Password_encryption, rolename, + password); new_record[Anum_pg_authid_rolpassword - 1] = CStringGetTextDatum(shadow_pass); new_record_repl[Anum_pg_authid_rolpassword - 1] = true; diff --git a/src/backend/libpq/auth-scram.c b/src/backend/libpq/auth-scram.c index 6e7a140582..cd4ede08f3 100644 --- a/src/backend/libpq/auth-scram.c +++ b/src/backend/libpq/auth-scram.c @@ -199,27 +199,11 @@ pg_be_scram_init(const char *username, const char *shadow_pass) got_verifier = false; } } - else if (password_type == PASSWORD_TYPE_PLAINTEXT) - { - /* - * The stored password is in plain format. Generate a fresh SCRAM - * verifier from it, and proceed with that. - */ - char *verifier; - - verifier = pg_be_scram_build_verifier(shadow_pass); - - (void) parse_scram_verifier(verifier, &state->iterations, &state->salt, - state->StoredKey, state->ServerKey); - pfree(verifier); - - got_verifier = true; - } else { /* - * The user doesn't have SCRAM verifier, nor could we generate - * one. (You cannot do SCRAM authentication with an MD5 hash.) + * The user doesn't have SCRAM verifier. (You cannot do SCRAM + * authentication with an MD5 hash.) */ state->logdetail = psprintf(_("User \"%s\" does not have a valid SCRAM verifier."), state->username); diff --git a/src/backend/libpq/auth.c b/src/backend/libpq/auth.c index ab4be21943..6d3ff68607 100644 --- a/src/backend/libpq/auth.c +++ b/src/backend/libpq/auth.c @@ -754,17 +754,13 @@ CheckPWChallengeAuth(Port *port, char **logdetail) shadow_pass = get_role_password(port->user_name, logdetail); /* - * If the user does not exist, or has no password, we still go through the - * motions of authentication, to avoid revealing to the client that the - * user didn't exist. If 'md5' is allowed, we choose whether to use 'md5' - * or 'scram-sha-256' authentication based on current password_encryption - * setting. The idea is that most genuine users probably have a password - * of that type, if we pretend that this user had a password of that type, - * too, it "blends in" best. - * - * If the user had a password, but it was expired, we'll use the details - * of the expired password for the authentication, but report it as - * failure to the client even if correct password was given. + * If the user does not exist, or has no password or it's expired, we + * still go through the motions of authentication, to avoid revealing to + * the client that the user didn't exist. If 'md5' is allowed, we choose + * whether to use 'md5' or 'scram-sha-256' authentication based on + * current password_encryption setting. The idea is that most genuine + * users probably have a password of that type, and if we pretend that + * this user had a password of that type, too, it "blends in" best. */ if (!shadow_pass) pwtype = Password_encryption; @@ -775,21 +771,15 @@ CheckPWChallengeAuth(Port *port, char **logdetail) * If 'md5' authentication is allowed, decide whether to perform 'md5' or * 'scram-sha-256' authentication based on the type of password the user * has. If it's an MD5 hash, we must do MD5 authentication, and if it's - * a SCRAM verifier, we must do SCRAM authentication. If it's stored in - * plaintext, we could do either one, so we opt for the more secure - * mechanism, SCRAM. + * a SCRAM verifier, we must do SCRAM authentication. * * If MD5 authentication is not allowed, always use SCRAM. If the user * had an MD5 password, CheckSCRAMAuth() will fail. */ if (port->hba->auth_method == uaMD5 && pwtype == PASSWORD_TYPE_MD5) - { auth_result = CheckMD5Auth(port, shadow_pass, logdetail); - } else - { auth_result = CheckSCRAMAuth(port, shadow_pass, logdetail); - } if (shadow_pass) pfree(shadow_pass); diff --git a/src/backend/libpq/crypt.c b/src/backend/libpq/crypt.c index 9fe79b4894..e7a6b04fb5 100644 --- a/src/backend/libpq/crypt.c +++ b/src/backend/libpq/crypt.c @@ -109,9 +109,8 @@ get_password_type(const char *shadow_pass) * Given a user-supplied password, convert it into a verifier of * 'target_type' kind. * - * If the password looks like a valid MD5 hash, it is stored as it is. - * We cannot reverse the hash, so even if the caller requested a plaintext - * plaintext password, the MD5 hash is returned. + * If the password is already in encrypted form, we cannot reverse the + * hash, so it is stored as it is regardless of the requested type. */ char * encrypt_password(PasswordType target_type, const char *role, @@ -120,54 +119,30 @@ encrypt_password(PasswordType target_type, const char *role, PasswordType guessed_type = get_password_type(password); char *encrypted_password; - switch (target_type) + if (guessed_type != PASSWORD_TYPE_PLAINTEXT) { - case PASSWORD_TYPE_PLAINTEXT: - - /* - * We cannot convert a hashed password back to plaintext, so just - * store the password as it was, whether it was hashed or not. - */ - return pstrdup(password); + /* + * Cannot convert an already-encrypted password from one + * format to another, so return it as it is. + */ + return pstrdup(password); + } + switch (target_type) + { case PASSWORD_TYPE_MD5: - switch (guessed_type) - { - case PASSWORD_TYPE_PLAINTEXT: - encrypted_password = palloc(MD5_PASSWD_LEN + 1); - - if (!pg_md5_encrypt(password, role, strlen(role), - encrypted_password)) - elog(ERROR, "password encryption failed"); - return encrypted_password; + encrypted_password = palloc(MD5_PASSWD_LEN + 1); - case PASSWORD_TYPE_SCRAM_SHA_256: - - /* - * cannot convert a SCRAM verifier to an MD5 hash, so fall - * through to save the SCRAM verifier instead. - */ - case PASSWORD_TYPE_MD5: - return pstrdup(password); - } - break; + if (!pg_md5_encrypt(password, role, strlen(role), + encrypted_password)) + elog(ERROR, "password encryption failed"); + return encrypted_password; case PASSWORD_TYPE_SCRAM_SHA_256: - switch (guessed_type) - { - case PASSWORD_TYPE_PLAINTEXT: - return pg_be_scram_build_verifier(password); - - case PASSWORD_TYPE_MD5: + return pg_be_scram_build_verifier(password); - /* - * cannot convert an MD5 hash to a SCRAM verifier, so fall - * through to save the MD5 hash instead. - */ - case PASSWORD_TYPE_SCRAM_SHA_256: - return pstrdup(password); - } - break; + case PASSWORD_TYPE_PLAINTEXT: + elog(ERROR, "cannot encrypt password with 'plaintext'"); } /* @@ -197,10 +172,17 @@ md5_crypt_verify(const char *role, const char *shadow_pass, { int retval; char crypt_pwd[MD5_PASSWD_LEN + 1]; - char crypt_pwd2[MD5_PASSWD_LEN + 1]; Assert(md5_salt_len > 0); + if (get_password_type(shadow_pass) != PASSWORD_TYPE_MD5) + { + /* incompatible password hash format. */ + *logdetail = psprintf(_("User \"%s\" has a password that cannot be used with MD5 authentication."), + role); + return STATUS_ERROR; + } + /* * Compute the correct answer for the MD5 challenge. * @@ -208,40 +190,12 @@ md5_crypt_verify(const char *role, const char *shadow_pass, * below: the only possible error is out-of-memory, which is unlikely, and * if it did happen adding a psprintf call would only make things worse. */ - switch (get_password_type(shadow_pass)) + /* stored password already encrypted, only do salt */ + if (!pg_md5_encrypt(shadow_pass + strlen("md5"), + md5_salt, md5_salt_len, + crypt_pwd)) { - case PASSWORD_TYPE_MD5: - /* stored password already encrypted, only do salt */ - if (!pg_md5_encrypt(shadow_pass + strlen("md5"), - md5_salt, md5_salt_len, - crypt_pwd)) - { - return STATUS_ERROR; - } - break; - - case PASSWORD_TYPE_PLAINTEXT: - /* stored password is plain, double-encrypt */ - if (!pg_md5_encrypt(shadow_pass, - role, - strlen(role), - crypt_pwd2)) - { - return STATUS_ERROR; - } - if (!pg_md5_encrypt(crypt_pwd2 + strlen("md5"), - md5_salt, md5_salt_len, - crypt_pwd)) - { - return STATUS_ERROR; - } - break; - - default: - /* unknown password hash format. */ - *logdetail = psprintf(_("User \"%s\" has a password that cannot be used with MD5 authentication."), - role); - return STATUS_ERROR; + return STATUS_ERROR; } if (strcmp(client_pass, crypt_pwd) == 0) @@ -259,8 +213,8 @@ md5_crypt_verify(const char *role, const char *shadow_pass, /* * Check given password for given user, and return STATUS_OK or STATUS_ERROR. * - * 'shadow_pass' is the user's correct password or password hash, as stored - * in pg_authid.rolpassword. + * 'shadow_pass' is the user's correct password hash, as stored in + * pg_authid.rolpassword. * 'client_pass' is the password given by the remote user. * * In the error case, optionally store a palloc'd string at *logdetail @@ -320,14 +274,10 @@ plain_crypt_verify(const char *role, const char *shadow_pass, break; case PASSWORD_TYPE_PLAINTEXT: - if (strcmp(client_pass, shadow_pass) == 0) - return STATUS_OK; - else - { - *logdetail = psprintf(_("Password does not match for user \"%s\"."), - role); - return STATUS_ERROR; - } + /* + * We never store passwords in plaintext, so this shouldn't + * happen. + */ break; } diff --git a/src/backend/parser/gram.y b/src/backend/parser/gram.y index 818d2c29d4..2cad8b25b8 100644 --- a/src/backend/parser/gram.y +++ b/src/backend/parser/gram.y @@ -994,13 +994,21 @@ AlterOptRoleElem: } | ENCRYPTED PASSWORD Sconst { - $$ = makeDefElem("encryptedPassword", + /* + * These days, passwords are always stored in encrypted + * form, so there is no difference between PASSWORD and + * ENCRYPTED PASSWORD. + */ + $$ = makeDefElem("password", (Node *)makeString($3), @1); } | UNENCRYPTED PASSWORD Sconst { - $$ = makeDefElem("unencryptedPassword", - (Node *)makeString($3), @1); + ereport(ERROR, + (errcode(ERRCODE_FEATURE_NOT_SUPPORTED), + errmsg("UNENCRYPTED PASSWORD is no longer supported"), + errhint("Remove UNENCRYPTED to store the password in encrypted form instead."), + parser_errposition(@1))); } | INHERIT { diff --git a/src/backend/utils/misc/guc.c b/src/backend/utils/misc/guc.c index 587fbce147..cb4e621c84 100644 --- a/src/backend/utils/misc/guc.c +++ b/src/backend/utils/misc/guc.c @@ -405,20 +405,16 @@ static const struct config_enum_entry force_parallel_mode_options[] = { /* * password_encryption used to be a boolean, so accept all the likely - * variants of "on" and "off", too. + * variants of "on", too. "off" used to store passwords in plaintext, + * but we don't support that anymore. */ static const struct config_enum_entry password_encryption_options[] = { - {"plain", PASSWORD_TYPE_PLAINTEXT, false}, {"md5", PASSWORD_TYPE_MD5, false}, {"scram-sha-256", PASSWORD_TYPE_SCRAM_SHA_256, false}, - {"off", PASSWORD_TYPE_PLAINTEXT, false}, - {"on", PASSWORD_TYPE_MD5, false}, + {"on", PASSWORD_TYPE_MD5, true}, {"true", PASSWORD_TYPE_MD5, true}, - {"false", PASSWORD_TYPE_PLAINTEXT, true}, {"yes", PASSWORD_TYPE_MD5, true}, - {"no", PASSWORD_TYPE_PLAINTEXT, true}, {"1", PASSWORD_TYPE_MD5, true}, - {"0", PASSWORD_TYPE_PLAINTEXT, true}, {NULL, 0, false} }; diff --git a/src/bin/psql/tab-complete.c b/src/bin/psql/tab-complete.c index e2a3351210..183fc37629 100644 --- a/src/bin/psql/tab-complete.c +++ b/src/bin/psql/tab-complete.c @@ -1634,10 +1634,10 @@ psql_completion(const char *text, int start, int end) { static const char *const list_ALTERUSER[] = {"BYPASSRLS", "CONNECTION LIMIT", "CREATEDB", "CREATEROLE", - "ENCRYPTED", "INHERIT", "LOGIN", "NOBYPASSRLS", + "ENCRYPTED PASSWORD", "INHERIT", "LOGIN", "NOBYPASSRLS", "NOCREATEDB", "NOCREATEROLE", "NOINHERIT", "NOLOGIN", "NOREPLICATION", "NOSUPERUSER", "PASSWORD", "RENAME TO", - "REPLICATION", "RESET", "SET", "SUPERUSER", "UNENCRYPTED", + "REPLICATION", "RESET", "SET", "SUPERUSER", "VALID UNTIL", "WITH", NULL}; COMPLETE_WITH_LIST(list_ALTERUSER); @@ -1649,18 +1649,15 @@ psql_completion(const char *text, int start, int end) /* Similar to the above, but don't complete "WITH" again. */ static const char *const list_ALTERUSER_WITH[] = {"BYPASSRLS", "CONNECTION LIMIT", "CREATEDB", "CREATEROLE", - "ENCRYPTED", "INHERIT", "LOGIN", "NOBYPASSRLS", + "ENCRYPTED PASSWORD", "INHERIT", "LOGIN", "NOBYPASSRLS", "NOCREATEDB", "NOCREATEROLE", "NOINHERIT", "NOLOGIN", "NOREPLICATION", "NOSUPERUSER", "PASSWORD", "RENAME TO", - "REPLICATION", "RESET", "SET", "SUPERUSER", "UNENCRYPTED", + "REPLICATION", "RESET", "SET", "SUPERUSER", "VALID UNTIL", NULL}; COMPLETE_WITH_LIST(list_ALTERUSER_WITH); } - /* complete ALTER USER,ROLE <name> ENCRYPTED,UNENCRYPTED with PASSWORD */ - else if (Matches4("ALTER", "USER|ROLE", MatchAny, "ENCRYPTED|UNENCRYPTED")) - COMPLETE_WITH_CONST("PASSWORD"); /* ALTER DEFAULT PRIVILEGES */ else if (Matches3("ALTER", "DEFAULT", "PRIVILEGES")) COMPLETE_WITH_LIST2("FOR ROLE", "IN SCHEMA"); @@ -2502,10 +2499,10 @@ psql_completion(const char *text, int start, int end) { static const char *const list_CREATEROLE[] = {"ADMIN", "BYPASSRLS", "CONNECTION LIMIT", "CREATEDB", "CREATEROLE", - "ENCRYPTED", "IN", "INHERIT", "LOGIN", "NOBYPASSRLS", + "ENCRYPTED PASSWORD", "IN", "INHERIT", "LOGIN", "NOBYPASSRLS", "NOCREATEDB", "NOCREATEROLE", "NOINHERIT", "NOLOGIN", "NOREPLICATION", "NOSUPERUSER", "PASSWORD", - "REPLICATION", "ROLE", "SUPERUSER", "SYSID", "UNENCRYPTED", + "REPLICATION", "ROLE", "SUPERUSER", "SYSID", "VALID UNTIL", "WITH", NULL}; COMPLETE_WITH_LIST(list_CREATEROLE); @@ -2517,21 +2514,15 @@ psql_completion(const char *text, int start, int end) /* Similar to the above, but don't complete "WITH" again. */ static const char *const list_CREATEROLE_WITH[] = {"ADMIN", "BYPASSRLS", "CONNECTION LIMIT", "CREATEDB", "CREATEROLE", - "ENCRYPTED", "IN", "INHERIT", "LOGIN", "NOBYPASSRLS", + "ENCRYPTED PASSWORD", "IN", "INHERIT", "LOGIN", "NOBYPASSRLS", "NOCREATEDB", "NOCREATEROLE", "NOINHERIT", "NOLOGIN", "NOREPLICATION", "NOSUPERUSER", "PASSWORD", - "REPLICATION", "ROLE", "SUPERUSER", "SYSID", "UNENCRYPTED", + "REPLICATION", "ROLE", "SUPERUSER", "SYSID", "VALID UNTIL", NULL}; COMPLETE_WITH_LIST(list_CREATEROLE_WITH); } - /* - * complete CREATE ROLE,USER,GROUP <name> ENCRYPTED,UNENCRYPTED with - * PASSWORD - */ - else if (Matches4("CREATE", "ROLE|USER|GROUP", MatchAny, "ENCRYPTED|UNENCRYPTED")) - COMPLETE_WITH_CONST("PASSWORD"); /* complete CREATE ROLE,USER,GROUP <name> IN with ROLE,GROUP */ else if (Matches4("CREATE", "ROLE|USER|GROUP", MatchAny, "IN")) COMPLETE_WITH_LIST2("GROUP", "ROLE"); diff --git a/src/bin/scripts/createuser.c b/src/bin/scripts/createuser.c index 35a53bf206..82a4d51498 100644 --- a/src/bin/scripts/createuser.c +++ b/src/bin/scripts/createuser.c @@ -48,7 +48,6 @@ main(int argc, char *argv[]) {"connection-limit", required_argument, NULL, 'c'}, {"pwprompt", no_argument, NULL, 'P'}, {"encrypted", no_argument, NULL, 'E'}, - {"unencrypted", no_argument, NULL, 'N'}, {NULL, 0, NULL, 0} }; @@ -75,8 +74,7 @@ main(int argc, char *argv[]) createrole = TRI_DEFAULT, inherit = TRI_DEFAULT, login = TRI_DEFAULT, - replication = TRI_DEFAULT, - encrypted = TRI_DEFAULT; + replication = TRI_DEFAULT; PQExpBufferData sql; @@ -88,7 +86,7 @@ main(int argc, char *argv[]) handle_help_version_opts(argc, argv, "createuser", help); - while ((c = getopt_long(argc, argv, "h:p:U:g:wWedDsSaArRiIlLc:PEN", + while ((c = getopt_long(argc, argv, "h:p:U:g:wWedDsSaArRiIlLc:PE", long_options, &optindex)) != -1) { switch (c) @@ -153,10 +151,7 @@ main(int argc, char *argv[]) pwprompt = true; break; case 'E': - encrypted = TRI_YES; - break; - case 'N': - encrypted = TRI_NO; + /* no-op, accepted for backwards-compatibility */ break; case 1: replication = TRI_YES; @@ -264,31 +259,22 @@ main(int argc, char *argv[]) printfPQExpBuffer(&sql, "CREATE ROLE %s", fmtId(newuser)); if (newpassword) { - if (encrypted == TRI_YES) - appendPQExpBufferStr(&sql, " ENCRYPTED"); - if (encrypted == TRI_NO) - appendPQExpBufferStr(&sql, " UNENCRYPTED"); + char *encrypted_password; + appendPQExpBufferStr(&sql, " PASSWORD "); - if (encrypted != TRI_NO) + encrypted_password = PQencryptPasswordConn(conn, + newpassword, + newuser, + NULL); + if (!encrypted_password) { - char *encrypted_password; - - encrypted_password = PQencryptPasswordConn(conn, - newpassword, - newuser, - NULL); - if (!encrypted_password) - { - fprintf(stderr, _("%s: password encryption failed: %s"), - progname, PQerrorMessage(conn)); - exit(1); - } - appendStringLiteralConn(&sql, encrypted_password, conn); - PQfreemem(encrypted_password); + fprintf(stderr, _("%s: password encryption failed: %s"), + progname, PQerrorMessage(conn)); + exit(1); } - else - appendStringLiteralConn(&sql, newpassword, conn); + appendStringLiteralConn(&sql, encrypted_password, conn); + PQfreemem(encrypted_password); } if (superuser == TRI_YES) appendPQExpBufferStr(&sql, " SUPERUSER"); @@ -361,14 +347,12 @@ help(const char *progname) printf(_(" -d, --createdb role can create new databases\n")); printf(_(" -D, --no-createdb role cannot create databases (default)\n")); printf(_(" -e, --echo show the commands being sent to the server\n")); - printf(_(" -E, --encrypted encrypt stored password\n")); printf(_(" -g, --role=ROLE new role will be a member of this role\n")); printf(_(" -i, --inherit role inherits privileges of roles it is a\n" " member of (default)\n")); printf(_(" -I, --no-inherit role does not inherit privileges\n")); printf(_(" -l, --login role can login (default)\n")); printf(_(" -L, --no-login role cannot login\n")); - printf(_(" -N, --unencrypted do not encrypt stored password\n")); printf(_(" -P, --pwprompt assign a password to new role\n")); printf(_(" -r, --createrole role can create new roles\n")); printf(_(" -R, --no-createrole role cannot create roles (default)\n")); diff --git a/src/include/libpq/crypt.h b/src/include/libpq/crypt.h index 63724f39ee..9bad67c890 100644 --- a/src/include/libpq/crypt.h +++ b/src/include/libpq/crypt.h @@ -16,10 +16,13 @@ #include "datatype/timestamp.h" /* - * Types of password hashes or verifiers that can be stored in - * pg_authid.rolpassword. + * Types of password hashes or verifiers. * - * This is also used for the password_encryption GUC. + * Plaintext passwords can be passed in by the user, in a CREATE/ALTER USER + * command. They will be encrypted to MD5 or SCRAM-SHA-256 format, before + * storing on-disk, so only MD5 and SCRAM-SHA-256 passwords should appear + * in pg_authid.rolpassword. They are also the allowed values for the + * password_encryption GUC. */ typedef enum PasswordType { diff --git a/src/interfaces/libpq/fe-auth.c b/src/interfaces/libpq/fe-auth.c index 54acd0f6bf..f4397afc64 100644 --- a/src/interfaces/libpq/fe-auth.c +++ b/src/interfaces/libpq/fe-auth.c @@ -1183,8 +1183,7 @@ PQencryptPasswordConn(PGconn *conn, const char *passwd, const char *user, * send the password in plaintext even if it was "off". */ if (strcmp(algorithm, "on") == 0 || - strcmp(algorithm, "off") == 0 || - strcmp(algorithm, "plain") == 0) + strcmp(algorithm, "off") == 0) algorithm = "md5"; /* diff --git a/src/test/authentication/t/001_password.pl b/src/test/authentication/t/001_password.pl index 216bdc031c..5a21ecd7e6 100644 --- a/src/test/authentication/t/001_password.pl +++ b/src/test/authentication/t/001_password.pl @@ -10,7 +10,7 @@ use strict; use warnings; use PostgresNode; use TestLib; -use Test::More tests => 12; +use Test::More tests => 8; # Delete pg_hba.conf from the given node, add a new entry to it # and then execute a reload to refresh it. @@ -53,32 +53,26 @@ SKIP: # password is used for all of them. $node->safe_psql('postgres', "SET password_encryption='scram-sha-256'; CREATE ROLE scram_role LOGIN PASSWORD 'pass';"); $node->safe_psql('postgres', "SET password_encryption='md5'; CREATE ROLE md5_role LOGIN PASSWORD 'pass';"); - $node->safe_psql('postgres', "SET password_encryption='plain'; CREATE ROLE plain_role LOGIN PASSWORD 'pass';"); $ENV{"PGPASSWORD"} = 'pass'; # For "trust" method, all users should be able to connect. reset_pg_hba($node, 'trust'); test_role($node, 'scram_role', 'trust', 0); test_role($node, 'md5_role', 'trust', 0); - test_role($node, 'plain_role', 'trust', 0); # For plain "password" method, all users should also be able to connect. reset_pg_hba($node, 'password'); test_role($node, 'scram_role', 'password', 0); test_role($node, 'md5_role', 'password', 0); - test_role($node, 'plain_role', 'password', 0); - # For "scram-sha-256" method, user "plain_role" and "scram_role" should - # be able to connect. + # For "scram-sha-256" method, user "scram_role" should be able to connect. reset_pg_hba($node, 'scram-sha-256'); test_role($node, 'scram_role', 'scram-sha-256', 0); test_role($node, 'md5_role', 'scram-sha-256', 2); - test_role($node, 'plain_role', 'scram-sha-256', 0); # For "md5" method, all users should be able to connect (SCRAM # authentication will be performed for the user with a scram verifier.) reset_pg_hba($node, 'md5'); test_role($node, 'scram_role', 'md5', 0); test_role($node, 'md5_role', 'md5', 0); - test_role($node, 'plain_role', 'md5', 0); } diff --git a/src/test/regress/expected/password.out b/src/test/regress/expected/password.out index 9ec5a52bba..e768985455 100644 --- a/src/test/regress/expected/password.out +++ b/src/test/regress/expected/password.out @@ -4,21 +4,17 @@ -- Tests for GUC password_encryption SET password_encryption = 'novalue'; -- error ERROR: invalid value for parameter "password_encryption": "novalue" -HINT: Available values: plain, md5, scram-sha-256, off, on. +HINT: Available values: md5, scram-sha-256, on. SET password_encryption = true; -- ok SET password_encryption = 'md5'; -- ok -SET password_encryption = 'plain'; -- ok SET password_encryption = 'scram-sha-256'; -- ok -- consistency of password entries -SET password_encryption = 'plain'; -CREATE ROLE regress_passwd1 PASSWORD 'role_pwd1'; SET password_encryption = 'md5'; CREATE ROLE regress_passwd2 PASSWORD 'role_pwd2'; SET password_encryption = 'on'; CREATE ROLE regress_passwd3 PASSWORD 'role_pwd3'; SET password_encryption = 'scram-sha-256'; CREATE ROLE regress_passwd4 PASSWORD 'role_pwd4'; -SET password_encryption = 'plain'; CREATE ROLE regress_passwd5 PASSWORD NULL; -- check list of created entries -- @@ -33,12 +29,11 @@ SELECT rolname, regexp_replace(rolpassword, '(SCRAM-SHA-256)\$(\d+):([a-zA-Z0-9+ ORDER BY rolname, rolpassword; rolname | rolpassword_masked -----------------+--------------------------------------------------- - regress_passwd1 | role_pwd1 regress_passwd2 | md54044304ba511dd062133eb5b4b84a2a3 regress_passwd3 | md50e5699b6911d87f17a08b8d76a21e8b8 regress_passwd4 | SCRAM-SHA-256$4096:<salt>$<storedkey>:<serverkey> regress_passwd5 | -(5 rows) +(4 rows) -- Rename a role ALTER ROLE regress_passwd3 RENAME TO regress_passwd3_new; @@ -54,30 +49,32 @@ SELECT rolname, rolpassword (1 row) ALTER ROLE regress_passwd3_new RENAME TO regress_passwd3; --- ENCRYPTED and UNENCRYPTED passwords -ALTER ROLE regress_passwd1 UNENCRYPTED PASSWORD 'foo'; -- unencrypted -ALTER ROLE regress_passwd2 UNENCRYPTED PASSWORD 'md5dfa155cadd5f4ad57860162f3fab9cdb'; -- encrypted with MD5 +-- Change passwords with ALTER USER. With plaintext or already-encrypted +-- passwords. SET password_encryption = 'md5'; -ALTER ROLE regress_passwd3 ENCRYPTED PASSWORD 'foo'; -- encrypted with MD5 -ALTER ROLE regress_passwd4 ENCRYPTED PASSWORD 'SCRAM-SHA-256$4096:VLK4RMaQLCvNtQ==$6YtlR4t69SguDiwFvbVgVZtuz6gpJQQqUMZ7IQJK5yI=:ps75jrHeYU4lXCcXI4O8oIdJ3eO8o2jirjruw9phBTo='; -- client-supplied SCRAM verifier, use as it is +-- encrypt with MD5 +ALTER ROLE regress_passwd3 PASSWORD 'foo'; +-- already encrypted, use as they are +ALTER ROLE regress_passwd2 PASSWORD 'md5dfa155cadd5f4ad57860162f3fab9cdb'; +ALTER ROLE regress_passwd4 PASSWORD 'SCRAM-SHA-256$4096:VLK4RMaQLCvNtQ==$6YtlR4t69SguDiwFvbVgVZtuz6gpJQQqUMZ7IQJK5yI=:ps75jrHeYU4lXCcXI4O8oIdJ3eO8o2jirjruw9phBTo='; SET password_encryption = 'scram-sha-256'; -ALTER ROLE regress_passwd5 ENCRYPTED PASSWORD 'foo'; -- create SCRAM verifier -CREATE ROLE regress_passwd6 ENCRYPTED PASSWORD 'md53725413363ab045e20521bf36b8d8d7f'; -- encrypted with MD5, use as it is +-- create SCRAM verifier +ALTER ROLE regress_passwd5 PASSWORD 'foo'; +-- already encrypted with MD5, use as it is +CREATE ROLE regress_passwd6 PASSWORD 'md53725413363ab045e20521bf36b8d8d7f'; SELECT rolname, regexp_replace(rolpassword, '(SCRAM-SHA-256)\$(\d+):([a-zA-Z0-9+/]+==)\$([a-zA-Z0-9+/]+=):([a-zA-Z0-9+/]+=)', '\1$\2:<salt>$<storedkey>:<serverkey>') as rolpassword_masked FROM pg_authid WHERE rolname LIKE 'regress_passwd%' ORDER BY rolname, rolpassword; rolname | rolpassword_masked -----------------+--------------------------------------------------- - regress_passwd1 | foo regress_passwd2 | md5dfa155cadd5f4ad57860162f3fab9cdb regress_passwd3 | md5530de4c298af94b3b9f7d20305d2a1bf regress_passwd4 | SCRAM-SHA-256$4096:<salt>$<storedkey>:<serverkey> regress_passwd5 | SCRAM-SHA-256$4096:<salt>$<storedkey>:<serverkey> regress_passwd6 | md53725413363ab045e20521bf36b8d8d7f -(6 rows) +(5 rows) -DROP ROLE regress_passwd1; DROP ROLE regress_passwd2; DROP ROLE regress_passwd3; DROP ROLE regress_passwd4; diff --git a/src/test/regress/sql/password.sql b/src/test/regress/sql/password.sql index 1e022dbf2d..7efbc17b61 100644 --- a/src/test/regress/sql/password.sql +++ b/src/test/regress/sql/password.sql @@ -6,19 +6,15 @@ SET password_encryption = 'novalue'; -- error SET password_encryption = true; -- ok SET password_encryption = 'md5'; -- ok -SET password_encryption = 'plain'; -- ok SET password_encryption = 'scram-sha-256'; -- ok -- consistency of password entries -SET password_encryption = 'plain'; -CREATE ROLE regress_passwd1 PASSWORD 'role_pwd1'; SET password_encryption = 'md5'; CREATE ROLE regress_passwd2 PASSWORD 'role_pwd2'; SET password_encryption = 'on'; CREATE ROLE regress_passwd3 PASSWORD 'role_pwd3'; SET password_encryption = 'scram-sha-256'; CREATE ROLE regress_passwd4 PASSWORD 'role_pwd4'; -SET password_encryption = 'plain'; CREATE ROLE regress_passwd5 PASSWORD NULL; -- check list of created entries @@ -42,24 +38,27 @@ SELECT rolname, rolpassword ORDER BY rolname, rolpassword; ALTER ROLE regress_passwd3_new RENAME TO regress_passwd3; --- ENCRYPTED and UNENCRYPTED passwords -ALTER ROLE regress_passwd1 UNENCRYPTED PASSWORD 'foo'; -- unencrypted -ALTER ROLE regress_passwd2 UNENCRYPTED PASSWORD 'md5dfa155cadd5f4ad57860162f3fab9cdb'; -- encrypted with MD5 +-- Change passwords with ALTER USER. With plaintext or already-encrypted +-- passwords. SET password_encryption = 'md5'; -ALTER ROLE regress_passwd3 ENCRYPTED PASSWORD 'foo'; -- encrypted with MD5 -ALTER ROLE regress_passwd4 ENCRYPTED PASSWORD 'SCRAM-SHA-256$4096:VLK4RMaQLCvNtQ==$6YtlR4t69SguDiwFvbVgVZtuz6gpJQQqUMZ7IQJK5yI=:ps75jrHeYU4lXCcXI4O8oIdJ3eO8o2jirjruw9phBTo='; -- client-supplied SCRAM verifier, use as it is +-- encrypt with MD5 +ALTER ROLE regress_passwd3 PASSWORD 'foo'; +-- already encrypted, use as they are +ALTER ROLE regress_passwd2 PASSWORD 'md5dfa155cadd5f4ad57860162f3fab9cdb'; +ALTER ROLE regress_passwd4 PASSWORD 'SCRAM-SHA-256$4096:VLK4RMaQLCvNtQ==$6YtlR4t69SguDiwFvbVgVZtuz6gpJQQqUMZ7IQJK5yI=:ps75jrHeYU4lXCcXI4O8oIdJ3eO8o2jirjruw9phBTo='; SET password_encryption = 'scram-sha-256'; -ALTER ROLE regress_passwd5 ENCRYPTED PASSWORD 'foo'; -- create SCRAM verifier -CREATE ROLE regress_passwd6 ENCRYPTED PASSWORD 'md53725413363ab045e20521bf36b8d8d7f'; -- encrypted with MD5, use as it is +-- create SCRAM verifier +ALTER ROLE regress_passwd5 PASSWORD 'foo'; +-- already encrypted with MD5, use as it is +CREATE ROLE regress_passwd6 PASSWORD 'md53725413363ab045e20521bf36b8d8d7f'; SELECT rolname, regexp_replace(rolpassword, '(SCRAM-SHA-256)\$(\d+):([a-zA-Z0-9+/]+==)\$([a-zA-Z0-9+/]+=):([a-zA-Z0-9+/]+=)', '\1$\2:<salt>$<storedkey>:<serverkey>') as rolpassword_masked FROM pg_authid WHERE rolname LIKE 'regress_passwd%' ORDER BY rolname, rolpassword; -DROP ROLE regress_passwd1; DROP ROLE regress_passwd2; DROP ROLE regress_passwd3; DROP ROLE regress_passwd4; -- 2.11.0
-- Sent via pgsql-hackers mailing list (pgsql-hackers@postgresql.org) To make changes to your subscription: http://www.postgresql.org/mailpref/pgsql-hackers
