Hi, Alvaro and Kevin. I'm Mengxing. This is a “synchronization” email to tell you what I've done and my next plan. I'm looking forward to your advice.
According to my proposal, I want to prepare the experimental environment during the community bonding period. As this is the first time I discuss with Alvaro, here I will introduce the environment again. My lab have a Lenovo System x3950 X6 machine. https://www.lenovo.com/images/products/system-x/pdfs/datasheets/x3950_x6_ds.pdf More specifically, there are 8 sockets, each has 15 Intel(R) Xeon(R) CPU E7-8870 v2 @ 2.30GHz. Thus we have 120 cores in total. The storage is a 1 TB SSD, with SAS interface, 500MB write bandwidth. OS is ubuntu 14.04. I've compiled & installed PostgreSQL and have tested it by using pgbench. I tuned parameter for database according to http://www.dbdude.com/postgresql/postgresqlperformance.php#BESTPRACTICES For pgbench, I set scale factor (-s) 512. Other configurations are default values. Because we have too many cores, SSD becomes the bottleneck. In my test, pgbench can scale to 36 connections. ( 18 KTPS throughput). CPU utilization is smaller than 30%. Therefore: 1. Is there anything wrong in my tuning parameters？For example, should I close "fsync"? Because we don't care recovery here. 2. Can we use just two sockets (30 physical cores) to run database server? Then the CPU can be the bottleneck so that it shows the problem we try to solve. BTW. Here is the question of Stephen. > What method of communication will be used among the mentors and with > Mengxing. What method do you prefer? > Frequency of status updates (must be at least once a week and more often is > encouraged). How about reporting my status once a week? > What steps will be taken next during the community bonding period. As I wrote in the proposal, I want to establish the environment and read the related source code. Do you have any suggestions for me? -- Mengxing Liu
